Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
com Tapered Wood-Sided Wagon Model H0767 INTRODUCTION The Model H0767 Tapered Wood-Sided Wagon features 8 1/4" high wooden interlocking side panels that are easily removed for access to the 14 3/4" x 33" bed. REMOVAL & INVENTORY 1. Remove your new wagon from the carton. 2. Compare all the contents with the inventory list below Figure 1. FRONT SUPPORT ASSEMBLY 1. Slide the front axle assembly onto the pivot post of the bed. 2. Fasten using the lock pin and collar. WHEELS 1. Inflate each wheel to 30 psi. 2. Slide a wheel onto each axle with the valve stem to the outside. 3. Push a hub cap onto the end of each axle until flush with the wheel. BED & SIDE PANELS 1. Place the bed on top of the frame. 2. Insert one of the side panels into the frame, making sure the slotted panel housing is facing inside. 3. Place the front and rear panels inside the slotted panel housing on the side panel installed in step 2. 4. Insert the other side panel into the frame, making sure the front and rear panels each slide into the slotted panel housing. PULL HANDLE 1. Align the holes on the end of the pull handle with the opening of the front axle assembly. 2. Insert the M8-1.25 x 95 slotted screw into the holes and fasten using the 8mm flat washer, lock washer and acorn nut. If you need additional help with this procedure, call our service department at: (570) 546-9663. Panther™ products are manufactured by Grizzly Industrial Inc. Figure 1. Fully assembled wagon. INVENTORY LIST A. Front Panel.................................................1 B. Back Panel.................................................1 C. Side Panels ................................................ 2 D. Wheels ....................................................... 4 E. Pull Handle ................................................. 1 F. Bed ............................................................. 1 G. Front Axle Assembly..................................1 H. Bolt Bag...................................................... 1 — Slotted Screw M8-1.25 x 95..................1 — Flat Washer 8mm..................................1 — Lock Washer 8mm................................1 — Acorn Nut M8 x 1.25.............................1 — Lock Pin.................................................1 — Collar.....................................................1 — Hub Caps..............................................4 Acaution Adult supervision is always required while this wagon is being used by children. H0767 Parts Breakdown and List REF PART# DESCRIPTION REF PART# DESCRIPTION 8 PH0767008 LOCK PIN 9 PH0767009 COLLAR 10 PH0767010 BED 11 PH0767011 SIDE PANEL 12 PW01M FLAT WASHER 8MM 13 PN18M ACORN NUT M8-1.25 14 PH0767014 PLASTIC HANDLE GRIP 15 PLW04M LOCK WASHER 8MM 1 PH0767001 HUB CAP 2 PH0767002 WHEEL 2.60 x 85 3 PH0767003 FRONT/REAR PANEL 4 PH0767004 PULL HANDLE 5 PH0767005 SLOTTED SCREW M8-1.25 x 95 6 PH0767006 FRONT AXLE ASSEMBLY 7 PH0767007 FRAME...