Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
¦ Damaged components can endanger children and reduce the product life. Check all components for possible damage and loose connections regularly, especially at the start of the season and at intervals of 1 – 2 months depending on how often the swing is used. ¦ Damaged or worn parts must be replaced immediately and the apparatus is not to be used un til restored. In case of need, exclusively Original KETTLER replacement parts should be used. ¦ The swing has been tested by the TUV and awarded the GS symbol. ¦ Improper repair or constructional changes (disassembly of original parts, attachment of unapproved parts, etc.) can result in danger to the user. Modifications to the apparatus, in particular to the suspension arrangement, are prohibited. ¦ Use of the apparatus is permitted for children of up to 50 kg (ca. 14 years of age). ¦ Small children (up to about 36 months) must only use the swing with a suitable child seat (for example Item-No. 08355-100) in place of the wooden seat, since it is possible that the child's strength is not sufficient to keep its own body weight in balance whilst he is playing. ¦ Please take care that the toy is only used by children with the appropriate abilities. Do not forget that you must ensure that it is operated safely. Assembly Instructions GB GB ¦ Caution: While assembly of the product keep off children’s reach (Choking hazard - contains small parts). How to handle the swing ¦ Make sure that usage does not commence until the apparatus has been properly assembled and subsequently controlled by an adult. ¦ Instruct children on the proper handling of the apparatus and advise them of possible dangers. ¦ Remember that the children's natural play instinct and temper may lead to unforeseeable situations excluding a responsibility of the manufacturers. ¦ Although dangers to children during proper use of the apparatus are highly unlikely, all play on the apparatus should be monitored by an adult. ¦ For cleaning and caring the swing only use environmentally friendly and no aggressive or corroding agents. ¦ Regularly grease the moving parts with some drops of oil. Instructions for Assembly ¦ Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer. ¦ Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters. ¦ The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equipment. ¦ The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if possible technically talented. ¦ Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine. ¦ Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags! ¦ Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. ¦ For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs). ¦ Waste Disposal: KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites). List of spare parts When ordering spare parts, always state the full item number, spare-partnumber, the quan Assembly Instructions GB GB tity required and the S/N of the product (see spare parts drawing). Example order: Art. no. 08371-190 / spare-part no. 70132195 / 2 pieces / S/N...... Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding the words „with fastening material“. Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. Goods may only be returned after prior arrangement and in (internal) packaging, which is safe for transportation, in the original box if possible. It is important to provide a detailed defect description / damage report! USA GB KETTLER GB Ltd. KETTLER House, Merse Road · North Moons Moat · Redditch, Worcestershire B98 9HL KETTLER International Inc. 1355 London Bridge Road · Vi...