Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
This warranty applies to watches purchased in the United States. For watches purchased outside the United States, please contact your authorized Freestyle® dealer for warranty information. If your watch requires servicing not covered under our warranty (battery, crystal, strap/bracelet/band, watch case plating), or refurbishing, complete the return form (next column) and return with your watch. Visit our website at: 8R02-SLO254A-NON INTRODUCTION Congratulations on your purchasing the Easy-Set Watch II. Designed for easy operation, the watch automatically tells you which button to use in a setting procedure. The watch has the following functions: • Real-time calendar clock for home time • Second calendar clock for foreign time • Dual daily alarms and hourly chimes • Stopwatch with split function • 10 preset countdown timers The watch is also equipped with an EL back light to facilitate time reading at night or in dim light. HOW TO USE THE BACK LIGHT Press the LIGHT button once to turn on the back light for three seconds. DISPLAY MODES The watch has four display modes: home time (TIME), home time alarm (ALM1), stopwatch (STW) and countdown timer (TMR). To change from one display mode to another, press the S3 button once. The mode description will appear for two seconds before activating the selected mode. HOME AND FOREIGN DISPLAY To display the foreign time, press S2 when the home time is displayed. The mode description (TM-2) will appear shortly before the foreign time is displayed. To change back to the home time, press S2. To display the daily alarm for foreign time, press S2 when the daily alarm for home time is displayed. The mode description (ALM 2) will appear shortly before the foreign time alarm is displayed. LIGHT S3 S1 S2 FEATURES: • CURRENT TIME • DAY/MONTH/DATE • DAILY ALARM • HOURLY CHIME • STOPWATCH • COUNTDOWN TIMER • DUAL TIME • DUAL ALARM • WATER RESISTANT TO 330FT/100M • NIGHT VISION™ BACK LIGHT KEY TO SYMBOLS #705 SHANE DORIAN II DIGITAL WATCH INSTRUCTIONS HOW TO SET THE TIME AND DATE 1 Select time display using the S3 button. 2 Select home time or foreign time using the S2 button. 3 Hold the S2 button for two seconds. The SET message will appear momentarily. The second digits will blink. 4 Press the S1 button to reset the second digits to 00. 5 Press the S3 button. The minute digits will blink. 6 Use the S1 button to set the minutes. Press the button once to increase the digits by one unit or speed up the process by holding down the button. 7 Press the S3 button.The hour digits will blink. 8 Use the S1 button to set the hours. 9 Follow the same pattern to set the day-of-the-month, month, day-of- the-week, hour format and date format. For the hour format,you can choose 12-hour display with P indicator or 24-hour display. As for the date format, you can choose M- D (month-day) or D-M (day-month). The chosen formats will apply to both home and foreign settings. 10 Press the S2 button to confirm the settings and return to current time display. HOW TO SET THE DAILY ALARMS 1 Select alarm function using the S3 button. 2 Select home and foreign time alarm using the S2 button. 3 Hold the S2 button for two seconds. The SET message will appear. The minute digits will blink. 4 Use the S1 button to set the minutes. 5 Press the S3 button. The hour digits will blink. 6 Use the S1 button to set the hours. 7 Press the S2 button to confirm and exit. HOW TO USE THE DAILY ALARMS AND HOURLY CHIMES To display the alarm time, select ALM 1 or ALM 2 mode using the S2 button in alarm mode. Use the S1 button to set the status of the alarm and chime functions of the chosen alarm. Press the button once to activate the daily alarm. Press the button again to activate the hourly chime. Press the button a third time to activate both functions. To deactivate both, press the S1 button a fourth time. The chime and alarm indicators will appear when their respective functions are active. WHEN AN ALARM OR HOURLY CHIME GOES OFF A tune will go off by the hour if the hourly chime function is activated and a 20-second alarm tune will be emitted at the designated time when the alarm is active. To stop either tune, press any button. To disable the functions, select ALM 1 or ALM 2 and use S1 button to turn off the indicator of the function as desired. HOW TO USE THE STOPWATCH For a straight forward count-up, 1 Select stopwatch mode using the S3 button. The last recorded time of the stopwatch will be displayed. Press the S2 button to clear the old record. 2 Press the S1 button once to start the stopwatch. The watch will start counting from 00'00''00 if the watch is cleared. Otherwise, it will pick up from where it last left off. The watch will count up to 59 minutes and 59.99 seconds before starting from zero again. 3 To stop counting, press the S1 button once. Press the button again to resume from where it left off. To clear the stopwatch, press the S1 button to stop counting and then press the S2 button. The sto...