Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
• To set an alarm that does not include a month (Daily alarm, Monthly alarm), set x for the month. Press D until the x mark appears (between 12 and 1) while month setting is flashing. • To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set xx for the day. Press D until the xx mark appears (between the end of the month and 1) while the day setting is flashing. • When setting the alarm time using the 12-hour format, take care to set the time correctly as a.m. or p.m. (P indicator). 5. Press A to exit the setting screen. Alarm Operation The alarm sounds at the preset time for about 10 seconds. In the case of the snooze alarm, the alarm operation is performed a total of seven times, every five minutes, or until you turn the alarm off or change it to a one-time alarm. Note • Pressing any button stops the alarm tone operation. • Performing any one of the following operations during a 5-minute interval between snooze alarms cancels the current snooze alarm operation. Displaying the Timekeeping Mode setting screen Displaying the Alarm1 setting screen To test the alarm In the Alarm Mode, hold down D to sound the alarm. To turn Alarms 2 through 5 on and off 1. In the Alarm Mode, use D to select a one-time alarm (alarm number 2 through 5). 2. Press A to toggle the displayed alarm on and off. • Turning on a one-time alarm (2 through 5) displays the one-time alarm on indicator on its screen. • The one-time alarm on indicator is displayed in all modes. • If any alarm is on, the one-time alarm on indicator is shown on the display in all modes. To select the operation of Alarm1 1. In the Alarm Mode, use D to select Alarm1. 2. Press A to cycle through the available settings in the sequence shown below. Snooze alarm on indicator and one-time alarm on indicator One-time alarm on Snooze alarm on Alarm off • The applicable indicator is displayed in all modes when an alarm is turned on. • The snooze alarm on indicator flashes during the 5-minute intervals between alarms. • Displaying the Alarm1 setting screen while the snooze alarm is turned on turns off the snooze alarm automatically (making Alarm1 a one-time alarm). To set an alarm time 1. In the Alarm Mode, use D to scroll through the alarm screens until the one whose time you want to set is displayed. • You can configure Alarm1 as a snooze alarm or a one-time alarm. Alarms 2 through 5 can be used as one-time alarms only. • The snooze alarm repeats every five minutes. 2. After you select an alarm, hold down A until the hour setting of the alarm time starts to flash. This indicates the setting screen. 3. Press C to move the flashing in the sequence shown below to select other settings. Hour Minutes Month Day Alarms You can set five independent Daily Alarms. When an alarm is turned on, the alarm tone sounds when the alarm time is reached. One of the alarms can be configured as a snooze alarm or a one-time alarm, while the other four are one-time alarms. You also can turn on an hourly time signal that causes the watch to beep twice every hour on the hour. • There are five alarm screens numbered1 through 5. The hourly time signal screen is indicated by :00. • When you enter the Alarm Mode, the screen you were viewing when you last exited the mode appears first. • All of the operations in this section are performed in the Alarm Mode, which you enter by pressing C. Alarm Types The alarm type is determined by the settings you make, as described below. • Daily alarm Set the hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at the time you set. • Date alarm Set the month, day, hour and minutes for the alarm time. This type of setting causes the alarm to sound at the specific time, on the specific date you set. • 1-Month alarm Set the month, hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at time you set, only during the month you set. • Monthly alarm Set the day, hour and minutes for the alarm time. This type of setting causes the alarm to sound every month at time you set, on the day you set. Timekeeping Use the Timekeeping Mode to set and view the current time and date. To set the time and date 1. In the Timekeeping Mode, hold down A until the seconds start to flash, which indicates the setting screen. 2. Press C to move the flashing in the sequence shown below to select other settings. Seconds Hour Minutes Day Month Year 3. When the setting you want to change is flashing, press D to change it as described below. MA0804-EA About This Manual • Button operations are indicated using the letters shown in the illustration. • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section. Timekeeping Mode Alarm Mode Countdown Timer Mode Stopwatch Mode Dual Time Mode Press . General Guide • Press C to change from mode to mode. • In any mode, press B to ill...