Оценок - 4, средний балл: 4.8
(
)
)
|
Фрагмент инструкции
Expose the watch to bright light to charge its battery before using it. You can use this watch even as its battery is being charged by exposure to bright light. • Be sure to read “Battery” of this manual for important information you need to know when exposing the watch to bright light. If the display of the watch is blank... If the sleep indicator (SLEEP ) is displayed, it means the watch’s Power Saving function has turned off the display to conserve power. Power Saving automatically turns off the display and enters a sleep state whenever the watch is left for a certain period where it is dark. • The initial factory default setting is Power Saving on. • The watch recovers from the sleep state if you move it to a well-lit area* , if you press any button, or if you angle the watch towards your face for reading. * It can take up to two seconds for the display to turn on. • See “Power Saving Function” for more information. Sleep indicator About This Manual • Button operations are indicated using the letters shown in the illustration. • Each section of this manual provides you with the information you need to perform operations in each mode. Further details and technical information can be found in the “Reference” section. (Light) General Guide • Press C to change from mode to mode. • In any mode, press L to illuminate the display. Stopwatch Mode Timekeeping Mode Alarm Mode Press C. World Time Mode Time Recorder Mode Radio-controlled Timekeeping This watch receives a time calibration signal and updates its time setting accordingly. The time calibration signal includes both Standard Time and Daylight Saving Time (summer time) data. • In the Timekeeping Mode, press D to display the Last Signal screen. The Last Signal screen shows the date and time of the last successful time cailbration signal reception. Last Signal Screen Press D. Day of week Receive time Month – Day Current Time Screen PM indicator Receive date Hour : Minutes Seconds • This watch is designed to pick up the time calibration signal transmitted from Rugby, England and the signal from Mainflingen, Germany. Current Time Setting This watch automatically adjusts its time setting in accordance with a time calibration signal. You can also perform a manual procedure to set the time and date, when necessary. • The first thing you should do after purchasing this watch is to set your Home City, which is the city where you will normally use the watch. For more information, see “To set your Home City” below. • When using the watch that is outside of the range of the transmitters in Rugby and Mainflingen, you need to manually adjust the time as required. See “Timekeeping” for information about manual settings. To set your Home City 1. In the Timekeeping Mode, hold down A until the city code setting starts to flash, which indicates the setting screen. 2. Use D(east) and B(west) to select the city code you want to use as your Home City. • The following are the city codes for major cities in the Western Europe time zones. LON: London PAR and BER: Paris, Berlin, Milan, Rome, Amsterdam, Hamburg, Frankfurt, Vienna, Barcelona, Madrid 3. Press C to display the transmitter mode setting screen. • If the displayed transmitter mode indicator shows something other than qvtA, use D to display qvtA before advancing to the next step. 4. Press A twice to exit the setting screen. • The first press of A displays the 12/24-hour setting screen. Pressing A again exits the setting screen. City code l l l ll l l l l lll l lllll l l l llll l l Transmitter mode indicator Important! • Normally, your watch should show the correct time as soon as you select your Home City code. If it does not, it should adjust automatically after the next auto receive operation (in the middle of the night). You can also perform manual receive or you can set the time manually. • If you are in an area that does not use Daylight Saving Time (summer time), turn off the DST setting. • See “Transmitters” for details about the transmitter mode indicator. Time Calibration Signal Reception There are two different methods you can use to receive the time calibration signal: auto receive and manual receive. • Auto Receive With auto receive, the watch automatically picks up the time calibration signal five times a day at 0:00 a.m., 1:00 a.m., 2:00 a.m., 3:00 a.m., and 4:00 a.m. For more information, see “About Auto Receive”. • Manual Receive Manual receive lets you start a time calibration receive operation with the press of a button. For more information, see “To perform manual receive”. Important! • Position the watch as shown in the nearby illustration, with its 12 o’clock side facing towards a window. Make sure there are no metal objects nearby. Resin Band Metal Band • The watch should not be on its side or facing the wrong way. • Proper signal reception can be difficult or even impossible under the conditions listed below. • Signal reception is normally better at night than during the day. • Time calibrati...
Эта инструкция также подходит к моделям:Часы - 2869 (587.05 kb)