Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
6 UP 7, DOWN 8 -to adjust both the hours and minutes for clock/alarm times; -to select the day of the week. -to select the alarm mode -to select the alarmweekend sleeper mode 7Socket for AC/DC 7.5 V adapter 8Battery compartment 9REPEAT ALARM -to switch off the alarm for a 5 minute period -to switch display backlight on/off -to switch off slumber 024-hour ALARM RESET - to automatically reset the alarm for the same time next day !TUNING - to tune to radio stations @Display - to show the clock/alarm times and status of the set #BAND - to select FM/MW waveband $VOLUME - to adjust the sound level %Pigtail - aerial for FM reception ^Reset - to reset the clock data SELF-POWERED BACK-UP The self-powered back-up conveniently allows your day, alarm and clock time settings to be stored for up to 3 minutes when there is a power interruption e.g. AC power failure or when changing batteries. The complete clock radio and backlight illumination will be switched off. As soon as the power supply returns the display will indicate the correct time. • If power supply returns after 3 minutes, the demo mode appears and you will need to re-enter all clock settings. GENERAL FEATURES Reset Should you receive external interference e.g. static electricity from carpets, thunderstorms, etc. which affects the display and electronic functions of your set, RESET allows you to clear all previous settings and start up again. • Use a ballpoint pen to press RESET, found on the bottom of the set. Demo mode When the set is first connected to a power supply or has been reset, ‘PHILIPS’ will scroll continuously across the demonstration display until the time and day settings are entered. In Demo mode only the ALARM/TIME/DAY SET control will function. Display backlight The use of the backlight depends on whether the set is battery or adapter operated. 1 Press REPEAT ALARM once to activate the backlight. . The backlight goes out after 2 seconds if the set is battery operated. . The display remains lit if the set is adapter operated. 2 Press REPEAT ALARM again if you want to: – Re-activate the backlight if the set is battery operated. – Switch off the backlight if adapter operated. NOTE:During an alarm call, the REPEAT ALARM will only operate for the repeat alarm function. This product complies with the radio interference requirements of the European Community The typeplate and production number are located inside the battery compartment. USING THE ALARM General You can set your alarm by radio, buzzer or both. • The buzzer is at a fixed volume and cannot be adjusted. • The power-saving-buzzer automatically replaces the radio alarm if battery supply is low. Setting the alarm by radio or buzzer 1 Press ALARM/TIME/DAY SET once or more until the display shows SET ALARM and the radio mor buzzer ksymbol flashes. 2 Press UP 7or DOWN 8to set and adjust both the hours and minutes: – with your finger held down on UP 7or DOWN 8 respectively, the time will increase/decrease rapidly and continuously from minutes to hours. – If necessary, press UP 7or DOWN 8briefly and repeatedly to adjust the time slowly, minute by minute. 3 Release UP 7or DOWN 8when you have reached the correct setting. . The display reverts to the clock display after 5 seconds. 4 Press ALARM MODE/OFF once or more to select radio m, buzzer kor both to activate your choice of alarm. To review the alarm time 1 Press ALARM/TIME/DAY once or more until the display shows SET ALARM and m or k. .The display reverts to the clock display after 5 seconds. IMPORTANT! If you want the radio alarm to wake you up, FIRST CHECK if you have tuned to a station and adjusted the volume loud enough. SWITCHING OFF THE ALARM There are three ways of switching off the alarm. Unless you cancel the alarm completely, the 24-hour ALARM RESET will be automatically selected after 30 minutes, from the time your alarm first goes off. 24-hour alarm reset If you want the alarm mode to be stopped immediately but also wish to retain the same alarm setting for the following day: SLUMBER This set has a built-in timer which enables the set to be automatically switched off during radio playback after a set period of time. There are three slumber times before the set turns itself off: 10, 20 and 30 minutes, off, 10 . . . . . Setting the Slumber 1 When the radio is on or off, select your slumber time by pressing the SLUMBER button once or more until the desired slumber time is shown e.g. SL:20. .SLUMBER appears when slumber is active. 2 To cancel the slumber function either: • Press SLUMBER once or more until the radio is switched off. • Press REPEAT ALARM. MAINTENANCE • Do not expose the set or batteries to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. • To clean the set use a damp chamois leather. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the housing. ENVIRONMENTAL INFORMATION • All unnecessary packaging material has been omitted to make the...
Эта инструкция также подходит к моделям:Часы - AJ3016/00 (224.71 kb)