Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
2 Rotate the main knob to adjust hour. 3 Press the knob to confirm. » The minute digits begin to blink. 4 Repeat steps 2-3 to set the minute, 12 /24 hour format, year, month, day, and month-day display mode in sequence. Tip • In time and date set ting mode, if you press and hold the knob for 3 seconds, the clock radio will save the change and quit the set ting mode. Listen to FM/MW radio Tune to radio stations Tip • Position the antenna as far as possible from T V, VCR , or other radiation source. • For better reception, fully ex tend and adjust the position of the antenna. 1 Press FM/MW to select FM or MW tuner source. 2 Press TUNING MODE repeatedly until [FIND] (find) blinks. 3 Rotate the main knob slowly. » The clock radio tunes to a station with strong reception automatically. 4 Press the knob to confirm. 5 Repeat steps 2-4 to tune to more radio stations. To tune to a station manually: 1 In tuner mode, press TUNING MODE repeatedly until [STEP] (s tep) blinks . 2 Rotate the knob slowly to select a frequency. Store radio stations automatically You can store a maximum of 20 FM radio stations and 10 MW radio stations. 1 In tuner mode, press TUNING MODE repeatedly until [AUTO] (auto) blinks. 2 Rotate the main knob slowly. » The clock radio stores all the available FM/MW radio stations and broadcasts the first available station automatically. Store radio stations manually 1 Tune to a radio station. 2 Press PROG. » The preset number begins to blink. 3 Rotate the main knob to select a number. 4 Press the knob to confirm. » [DONE] (done) is displayed. 5 Repeat steps 1 to 4 to store other stations. Note • To remove a pre-stored station, store another station in its place. Select a preset radio station In tuner mode, press PRESET, then rotate the main knob to select a preset number. Adjust volume F Other features Display indoor/outdoor temperature Adjust temperature display 1 Press DISPLAY. 2 Rotate the knob to select a temperature display mode for the main unit: • Display indoor temperature; • Display outdoor temperature detected from channel 1/2/3; or • Display indoor and outdoor temperature alternatively. 3 Press the knob to confirm. Tip • To conver t between Centigrade (°C) and Fahrenheit (°F) temperature display, adjust °C/°F slide inside the batter y compar tment of the sensor. • If the main unit fails to receive signal from the sensor, only indoor temperature can be displayed. Improve sensor reception When batter y is correctly installed in the sensor, the sensor star ts to transmit RF signal to the main unit through Channel 1/2/3. To improve the sensor reception, • adjust the CHANNEL control inside the bat ter y compar tment of the sensor. • reduce the distance between the main unit and the sensor. • press RESET on the sensor to restar t transmission, in case of sudden error or abnormal state. To change to Channel 2 or 3 to transmit RF signal, 1 Press DISPLAY. 2 Rotate the knob until the corresponding icon appears. 3 Press the knob to confirm. 4 Switch the CHANNEL control to 2 or 3. » The main unit and sensor begin to detect signal from Channel 2 or 3 and then display the outdoor temperature. Enjoy nature sound This clock radio provides realistic nature sounds of rooster, forest, sea, rain, bell, and bird. 1 Press NATURE SOUND. 2 Rotate the knob to select a nature sound. 3 Press the knob to confirm. 4 Rotate the knob to adjust the volume level of the nature sound (0 -8). Tip • To deactivate the nature sound, press the knob again. Set alarm timer Set alarm You can set two alarms to ring at different time. Note • Make sure that the clock is set correctly. 1 In standby mode, press and hold AL1/AL2 for two seconds to activate alarm set ting mode. » The hour digits and [AL1]/[AL2] begin to blink. 2 Rotate the main knob to adjust hour. 3 Press the main knob to confirm. » The minute digits and [AL1]/[AL2] begin to blink. 4 Repeat Step 2-3 to set minute. 5 Repeat Step 2-3 to select whether to ring alarm for the whole week, on weekdays (Monday to Friday), or on the weekend (Saturday and Sunday). 6 Repeat steps 2-3 to select an alarm source: radio, buzzer, or a nature sound. 7 Repeat steps 2-3 to set the alarm volume. Activate/deactivate alarm timer 1 Press AL1/AL2 to view alarm settings. 2 Press AL1/AL2 again to activate or deactivate the alarm timer. » [AL1]/[AL2] appears if alarm timer is on and disappears if it is off. • To stop the ringing alarm, press the corresponding AL1/AL2. • The alarm repeats ringing for the nex t day. Snooze alarm When alarm sounds, press SNOOZE. » The alarm snoozes and repeats ringing nine minutes later. Set sleep timer This clock radio can switch to standby mode automatically after a preset period. 1 Press SLEEP. 2 Rotate the main knob to select the sleep timer period (in minutes). 3 Press the knob to confirm. » When the sleep timer is activated, appears. To deactivate the sleep timer: In sleep timer setting mode, rotate the knob until [OFF] (off) appears, then press the knob. 15 30 60...