• Dynamic label segment (DLS) • Signal strength • Program type (PTY) • Ensemble name • Frequency • Signal error rate • Bitrate codec • Time • Date Use DAB menus 1 In DAB mode, press MENU to access the DAB menus. 2 Turn the knob to toggle through the menus. Tune to a stored station 1 Press the knob to access the list of stored stations. • If no DAB station is stored, the product star ts automatic search. 2 Turn the knob to select a station. 3 Press the knob to star t listening. Re-scan for stations Full scan is used to perform a wide range search for DAB radio stations. Press the knob to star t scanning for available DAB stations. » After the scanning is complete, the first detected station is broadcast. Tune to a station manually With this feature, you can tune to a specific channel/frequency manually. In addition to antenna orientation for better radio reception, the optimal reception can also be obtained with this feature. 1 Press the knob to access the station list. 2 Turn the knob to select a station from 5A to 13F. Press the knob to confirm the option. DRC (Dynamic Range Control) DRC adds or removes a degree of compensation for the differences in the dynamic range between radio stations. Press the knob to access the sub-menus. 2 Turn the knob to select an option. • : No compensation applied. (The asterisk indicates the current setting.) • : Medium compensation applied. • : Maximum compensation applied. 3 Press the knob to confirm the option. Remove invalid stations This option lists active stations and removes any stations that are in the list but have no ser vice in your area. In front of the station name of an invalid station, a question mark (?) is displayed. 1 Press the knob to access the sub-menus. 2 Turn the knob to select an option. • : Return to the previous menu. • : Remove invalid stations from the station list. 3 Press the knob to confirm the option. System menus 1 Press the knob to access system menus. 2 Turn the knob to select a sub-menu. • For details, refer to the section ‘Use system menus‘. 8 Use system menus Use the system menus to • check the version of current software of this product, • upgrade the software, and • reset the product to factor y default status. Check the current software version Press the knob to display the version of current software. Reset the product 1 Press the knob to display the options. 2 Turn the knob to select an option. • : Return to the previous menu. • : Reset the product to factor y default status. 3 Press the knob to confirm the option. Upgrade the software 1 Go to t. 2 Search for suppor t information about your product with “OR7200/10“ as the keyword. » When an upgrade packet is available, the link of “Firmware Upgrade Readme File“ is accessible.The exact wording of this link name may vary in different languages. 3 Click the link of “Firmware Upgrade Readme File“. 4 Read and understand the instructions on software upgrade. 5 Follow the instructions to complete the upgrade. 9 Listen to an external device (Fig. 6) You can also listen to an external audio device, for example, MP3 player, through this product. 1 Turn the SOURCE knob to switch the product to MP3-Link mode. 2 Connect the MP3 link cable to • the MP3-LINK socket on the back panel of this product, and • the headphone jack on the external device. 3 Play the external device (refer to its user manual). 10 Adjust the volume Turn the knob. 11 Troubleshooting Warning • Never remove the casing of this product. To keep the warranty valid, never tr y to repair the product yourself. If you encounter problems when using this product, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips Web page (t). When you contact Philips, make sure that the product is nearby and the model number and serial number are available. No power • Make sure that the AC power cord is properly connected. • Make sure that there is power at the AC power outlet. No sound • Adjust the volume. • In MP3-Link mode, make sure that the external audio device is not muted. No response from the product • Make sure that the power is available. • Turn off the product, and then turn it on again. Poor radio reception • Due to the interference from other electrics or building obstacles, the signals become weak. Move the product to a place free of interference. • Make sure that the antenna is fully extended. Adjust the position of the antenna. Clock setting is erased. • Power has been interrupted, or the AC power cord has been disconnected. • Set the clock again. 12 Product information Note • Product information is subject to change without prior notice. Amplifier Frequency Response 60 Hz - 16 kHz, ±3 dB Signal to Noise Ratio > 65 dBA Aux Input 0.5 V RMS 20 kohm Tuner Tuning Range Tuning grid DAB sensitivity (EN50248) Total Harmonic Distor tion Signal to Noise Ratio Number of preset radio stations FM: 87....
