Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Philips, модель AJ4000B/12

Производитель: Philips
Размер: 1.74 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


• Batter y usage CAUTION – To prevent batter y leakage which may result in bodily injur y, proper ty damage, or damage to the clock radio: • Install the batter y correctly, + and - as marked on the clock radio. • Remove the batter y when the clock radio is not used for a long time. • The batter y shall not be exposed to excessive heat such as sunshine, fire or the like. • This clock radio shall not be exposed to dripping or splashing. • Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable. 3 EN EN 4 2 Your clock radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at What's in the box Check and identify the contents of your package. (Fig. ) a AJ4000 elcome User Manual 3 Get started Always follow the instructions in this chapter in sequence. Install battery Caution •• Risk of explosion! Keep the battery away from heat, sunshine or fire. Never discard battery in fire. •• The battery contains chemical substances, so it should be disposed of properly. Insert one 9V 6F22 battery (not supplied) with correct polarity (+/-) as illustrated. (Fig .) Note •• The battery can only back up clock and alarm settings. b 5 EN Connect power Caution •• Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio. •• Risk of electric shock! When you unplug the power adapter, always pull the plug from the socket. Never pull the cord. Note •• The type plate is located at the bottom of the clock radio. (Fig. ) c Set clock (Fig. ) 1 Switch the slider to SET TIME . »»The hour and minute digits blink. 2 Press HR and MIN to adjust time. 3 Switch the slider to CLOCK to confirm the setting. 1 2 SET TIME 4 CLOCK MIN 3 HR MIN d EN 6 4 Listen to FM radio Note •• Keep the clock radio away from other electronic devices to avoid radio interference. •• For better reception, fully extend and adjust the position of the FM antenna. Tune to FM radio stations (Fig .) 1 Switch the slider to RADIO. 2 Rotate TUNING to select a station. »»The indicator shows the radio frequency of the waveband. 3 While listening, rotate VOL to adjust volume. 4 Switch the slider to OFF to turn off the radio. 1 2 23 24 TUNING VOL OFF RADIO e 5 Set alarm timer Set alarm Follow the illustration to set the alarm (Fig. ) • AL1: Set the first alarm. • AL2: Set the second alarm. 3 MIN 21 21 SET AL 1 SET AL 2 2 HR 2 HR f 3 MIN 7 EN Select alarm source (Fig. ) To select the last heard channel or buzzer as the alarm sound: • AL1: Switch the slider to RADIO or BUZ . • AL2: Switch the slider to RADIO or BUZ. »»The corresponding alarm icon lights up. Note •• The gentle wake-up function is available for buzzer only. Deactivate the alarm timer Switch AL1 or AL2 to OFF to deactivate the alarm clock. »» If the alarm timer is deactivated, the alarm indicator turns off. BUZ AL 1 RADIO AL 2 g Snooze the alarm (Fig. ) 1 When alarm sounds, press SNOOZE . »»The alarm snoozes and repeats ringing nine minutes later. 2 To reset the alarm, press ALARM RESET. »»The alarm repeats ringing for the next day. h 21 2 ALARM RESET SNOOZE EN 8 6 Other features Adjust brightness (Fig. ) Set sleep timer (Fig. ) 1 Press SLEEP repeatedly to set the sleep time. »»The radio turns on automatically. 2 To check the remaining sleep time, press SLEEP again. i 15 30 60 90 120 OFF SLEEP j To deactivate the sleep timer: • Press SLEEP repeatedly until [OFF] appears. Charge your mobile phone You can use this device to charge your mobile phone. Note •• Make sure that the USB socket and the Micro USB are used only for charging. •• The USB charging and Micro USB charging are available when AC power is connected. Option 1 :USB socket (Fig. ) Note •• The USB cable is not supplied. •• Some USB cables may not work with this device due to different materials and product techniques. k Option 2 : Micro USB 7 Product (Fig. ) l 221 information Note • Product information is subject to change without prior notice. Specifications 222 Amplifier Rated Output Power 300mW RMS Tuner (FM) Tuning Range 87.5 - 108MHz Sensitivity -Mono, 26dB S/N Ratio <22 dBf Total Harmonic Distortion <3% Signal to Noise Ratio >45dB General information AC power (power Brand name: Philips; adapter) Model: AS100-065-AE130; Input: 100-240 V~ 50/60 Hz; 0.5A; Output: 6.5 V 1.3 A Battery power 9 V Operation Power Consumption 11 W Standby Power Consumption <1 W USB Charge voltage DC 5V Micro USB Charge voltage DC 5V 9 EN Dimensions: 8 Troubleshooting Main Unit (W x H x D) 173x 64x 159 mm Weight: -Main Unit 0.5 kg Warning • Never remove the casing of this apparatus. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips ...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории