Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Supplied accessory – 1 X cer tified AC 7.5V adapter (Input: 220-230V ~50Hz 30mA, Output: 7.5V 250mA) – 1 X outdoor sensor Controls (see 1) 1 ALM 1/ ALM 2 – activates/confirms ALARM 1 /ALARM 2 time setting – switches off the alarm 2 RADIO ON/OFF – switches the radio on/off – switches the set on or to standby – stops the active buzzer or radio alarm for 24 hours – switches off the sleep timer 3 TIME SET/RCC SYNC – activates/confirms clock/date setting – activates RCC (Radio Controlled Clock) reception 4 AUTO SCAN/DATE – programs preset radio stations – displays month and day information in standby mode – changes display order between month and day during setting time – receives transmission from the sensor 5 DISPLAY – toggles between indoor temperature, indoor humidity and outdoor temperature 6 RADIO•BUZ – selects alarm mode: radio or buzzer 7 REPEAT ALARM/BRIGHTNESS CONTROL – pushes to switch off alarm for a 9-minute period – changes the brightness of the display illumination 8 LCD Display – shows the clock/ alarm time or radio and weather forecast information 9 SLEEP/ALARM RESET – switches off radio for timer mode – adjusts timer options for radio playback – stops the active buzzer or radio alarm for 24 hours 0 PRESET +/ – selects a preset radion station ! TUNING +/- – tunes to radio stations – adjusts clock / alarm time @ VOL– adjusts sound level # Color lamp– indicates the different for thcoming weather situation $ Battery compartment – opens to inser t 4 x 1.5V AAA batteries % RESET – press if the set / display does not react to operation of any button ^ (oC oF) Slide Switch – selects between Centigrade (oC) or Fahrenheit (oF) temperature unit display & DC 7.5V – socket for AC/DC 7.5V adapter * Pigtail – FM antenna to improve FM reception Controls on the sensor (see 1) 1 LCD display – shows current temperature, and low batter y indication of the sensor 2 LED light – flashes when the sensor is transmitting 3 RESET – resets to star t transmitting 4 (oC oF) Slide Switch – selects between Centigrade (oC) or Fahrenheit (oF) temperature unit display 5 CHANNEL 1/ 2 /3 – selects RF channel to transmit and receive between the senor and the main unit 6 Door lock – turns to lock and un-lock the sensor door. 7 Sensor support – pulls out to stand the sensor Power supply Clock and Date Power supply Make sure you remove the plug from the set and wall outlet before inser ting batteries. Batteries (not supplied) for the main unit and the outdoor sensor 1 Open the batter y door and inser t 4 batteries, typed AAA for the main unit, and 2 batteries typed AA for the sensor, with the correct polarity as indicated by the "+" and "–" symbols inside the compar tment. 2 Replace the battery door, making sure the batteries are firmly and correctly in place. The set is now ready to operate. Batteries contain chemical substances, so they should be disposed of properly. Mains Adapter. Note: Remove the batteries before you use the AC adapter. 1 Connect the mains adapter to the set's DC 7.5V socket and to the power socket. Helpful hints: To avoid damage to the set, use only the adapter supplied! The type plate is located on the bottom of the set. This set complies with the radio interference requirements of the European Community. Setting the clock and date(see 2) The clock uses 24-hour time format. Auto setting (RCC - Radio Controlled Clock) The set has a built-in radio controlled clock (RCC). The clock automatically synchronizes the current time and date when it is brought within the range of the radio signal DCF77.5KHz generated from Frankfur t, Germany, for Central Europe. 1 For the first time when the set is powered on, or reconnected to power, the set will auto perform RCC searching. Or, to perform RCC searching, press briefly TIME SET / RCC SYNC. . The will display flashing, indicating RCC searching is in progress (See 3). . When time signal is received, displays. If no signal is received, will display . To adjust to your local time • If you didn’t previously adjust to your local time, or the set is reconnected to power, the time searched by RCC is Central European time. To adjust the time to your local time, you need to calculate the time zone difference between your local time and the central European time, and do the steps described in “ Manual setting ”. Helpful hints: – The searching will stop 10 minutes later if no time signal is received. – RCC time will auto be updated at 2: 00 am ever y day. You don’t need to re-adjust to your local time if Manual setting You may also set or adjust time manually. 1 Press and hold TIME SET / RCC SYNC for 2 seconds. . The digits for year flash. 2 Hold down or press TUNING +/-repeatedly to adjust the time digits. • If the set currently shows the central European time, add or subtract by hour(s) the time zone difference from your local time. • When it comes to adjust month and day, you may press AUTO SCAN/DATE to change the display order between month and day. 3 Press TIME SET / RCC SYNC to ...