Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
Be sure to remove the sticker before using the clock. • Depending on the clock model, the configuration of your clock may differ somewhat from that shown in the illustration. DATE (month - date) Day of the week PM indicator Current time (Hour, minutes, seconds) Current Temperature Operation 2 SETTING THE TIME 1. Press the SET button ( 22222) to cycle through the setting screens as shown Current Time Screen Contrast Setting Screen Year Setting Screen Month and Day Setting Screen 12-hour/24-hour Setting Screen Time Setting Screen 2. While the screen you want is on the display, use the + and – buttons ( 33333) to change the digits that are flashing. Press + to increase the flashing digits. Press – to decrease the flashing digits. • Holding down + or – changes the flashing digits at high speed. • You can set the year in the range of 2000 to 2099. The day of the week is set automatically in accordance with the date setting. • Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00. • Each press of + or – while the 12-hour/24-hour Setting Screen is on the display toggles between 12-hour and 24-hour timekeeping. • You can set the contrast level in the range of 1 to 10. 3. After making the settings you want, use the SET button ( 22222) to display the Current Time Screen. • The clock automatically returns to the Current Time Screen if you leave a setting screen on the display for about three minutes without performing any operation. THERMOMETER FUNCTIONS • A built-in sensor measures temperature and shows • The temperature display shows “LO” for temperatures C (–3.8° F) and “HI” for temperatures above 49.9° C (121.8° F). • Though temperature readings are displayed up to 0° C (32° F) and greater than 41° C (105° F), note that such readings are actually outside the guaranteed temperature Switching between Celsius and Fahrenheit • Push the ° C/ ° F button ( 44444) to select either Celsius ( ° C) or Fahrenheit ( ° F). C F ° C/ ° F button ( 44444) BATTERYREPLACEMENT • Replace batteries whenever the display of the clock becomes dim and difficult to read. 1. Open the battery compartment cover as shown in the illustration. 2. Remove both of the old batteries. 3. Load two new batteries. Make sure that their positive ( + ) and negative ( – ) ends face in the correct directions. If you load batteries incorrectly, they can burst and damage the clock. 4. Replace the battery compartment cover. 5. Press the RESET button ( 11111). Be sure to press the RESET button ( 11111) after replacing batteries. Battery precautions • Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact a physician immediately. • Be sure to load the batteries with their positive ( + ) and negative ( – ) ends facing correctly. • Never mix old and new batteries, or batteries of different brands. • Never charge the batteries that come with the product. • Should batteries ever leak while in the product, wipe out the fluid with a cloth, taking care not to let any get onto your skin. • Replace the batteries at least once a year, even if the current batteries are working properly. • The batteries that come with the product lose some of their power during transport and storage. SPECIFICATIONS Accuracy at Normal Temperature: ± 60 seconds a month Calendar System: Auto-calendar pre-programmed from the year 2000 to 2099 Thermometer Functions: Measuring range: –19.9° C to 49.9° C (–3.8° F to 121.8° F) Though temperature readings are displayed up to 0° C (32° F) and greater than 41° C (105° F), note that such readings are actually outside the guaranteed temperature range of this clock. Temperature Sensor Precision: ± 2° C ( ± 4° F) in range of 0° C to 40° C (32° F to 104° F) Battery Life: Approximately 1 year Battery: Two AA size batteries (Type: R6P) Ambient Temperature Range: 0° C to 40° C (32° F to 104° F) Operation 2 SETTING THE TIME 1. Press the SET button ( 22222) to cycle through the setting screens as shown Current Time Screen Contrast Setting Screen Year Setting Screen Month and Day Setting Screen 12-hour/24-hour Setting Screen Time Setting Screen 2. While the screen you want is on the display, use the + and – buttons ( 33333) to change the digits that are flashing. Press + to increase the flashing digits. Press – to decrease the flashing digits. • Holding down + or – changes the flashing digits at high speed. • You can set the year in the range of 2000 to 2099. The day of the week is set automatically in accordance with the date setting. • Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00. • Each press of + or – while the 12-hour/24-hour Setting Screen is on the display toggles between 12-hour and 24-hour timekeeping. • You can set the contrast level in the range of 1 to 10. 3. After making the settings you want, use the SET button ( 22222) to display the Current Time Screen. • The clock automatically returns to the...