Войти:
Оценок - 3, средний балл: 3.7 ( )

Инструкция по эксплуатации Casio, модель DQR-300

Производитель: Casio
Размер: 829.15 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


5. Press the RESET button (6). Be sure to press the RESET button (6) after replacing batteries. To replace sub-unit batteries 1. Open the stand so you can see the back cover. 2. Remove the back cover screw, and then open the back cover. 3. Remove both old batteries. 4. Load new batteries. Make sure that their positive (+) and negative (–) ends face in the correct directions. If you load batteries incorrectly, they can burst and damage the product. 5. Replace the back cover and secure it in place with the screw. 6. Press the RESET button (D). Be sure to press the RESET button (D) after replacing batteries. 7. Press the RE-SYNC button (A). Normal Timekeeping Screen Year Setting Screen 12-hour/24-hour Timekeeping Screen Month and Day Setting Screen Time Setting Screen Operation Guide DQR-300 4 Battery precautions •Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician immediately. •Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly. •Never mix old and new batteries, or batteries of different brands. •Never charge the batteries that come with the clock. •Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin. •Replace the batteries at least once a year, even if the current batteries are working properly. •The batteries that come with the clock lose some of their power during transport and storage. THERMOMETER FUNCTIONS Both the main unit and the sub-unit are equipped with their own temperature sensors. Temperature data measured by the sub-unit is sent by wireless transfer to the main unit. You can toggle the main unit display between the main unit temperature reading and the sub-unit temperature reading. This makes it possible to view both the indoor and outdoor temperature on the main unit display. Temperature Measurements •Both the main unit and the sub-unit take temperature measurements every 16 seconds. •The temperature display shows “LO” for temperatures below –50°C (–58°F) and “HI” for temperatures above 70°C (158°F). •Though temperature readings are displayed up to 0°C (32°F) and greater than 41°C (105°F), note that such readings are actually outside the guaranteed temperature range of this clock. Switching between Celsius and Fahrenheit •Push the °C/ °F button (0) to select either Celsius (°C) or Fahrenheit (°F). Celsius (°C) Fahrenheit (°F) °C/ °F button (0) °C °F Switching between Main Unit and Sub-unit Temperature Data •Press the SELECT button (B) to toggle the display between the main unit (INDOOR) temperature and the subunit (OUTDOOR) temperature. Main unit temperature: INDOOR indicator displayed Sub-unit temperature: OUTDOOR indicator displayed •The display does not change to the sub-unit (OUTDOOR) temperature if no data has been received from the subunit yet. •Holding down SELECT button (B) for about two seconds causes the display to continually toggle between the main unit and sub-unit temperature at five-second intervals. Main unit Sub-unit SELECT button (B) INDOOR OUTDOOR High Temperature and Low Temperature Memory •The following data is stored in memory automatically. Main unit high temperature and low temperature Sub-unit high temperature and low temperature •To clear the high temperature and low temperature data memory, press the CLEAR button (9). New data starts to be stored after memory is cleared. CLEAR button (9) MAX/MIN TEMP. button (7) Main unit high temperature and low temperature Sub-unit high temperature and low temperature Current temperature and humidity Operation Guide DQR-300 4 Battery precautions •Keep batteries out of the reach of small children. If a battery is accidentally swallowed, contact your physician immediately. •Be sure to load the batteries with their positive (+) and negative (–) ends facing correctly. •Never mix old and new batteries, or batteries of different brands. •Never charge the batteries that come with the clock. •Should batteries ever leak while in the clock, wipe out the fluid with a cloth, taking care not to let any get onto your skin. •Replace the batteries at least once a year, even if the current batteries are working properly. •The batteries that come with the clock lose some of their power during transport and storage. THERMOMETER FUNCTIONS Both the main unit and the sub-unit are equipped with their own temperature sensors. Temperature data measured by the sub-unit is sent by wireless transfer to the main unit. You can toggle the main unit display between the main unit temperature reading and the sub-unit temperature reading. This makes it possible to view both the indoor and outdoor temperature on the main unit display. Temperature Measurements •Both the main unit and the sub-unit take temperature measurements every 16 seconds. •The temperature display shows “LO” for temperatures below –50°C (–58°F) and “HI” for temperatures above 70°C (158°F). •Though temperature readings are ...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории