Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Turning the Alarm On and Off Use the Alarm Mode selector ( 4) to turn the alarm on and off, and to select the snooze feature. • The alarm time appears in place of the date on the display whenever the Alarm Mode selector ( 4) is set to ON or SNZ. • The volume of the alarm sound cycles through five levels as it sounds. Stopping the Alarm • When the alarm is sounding, press the SNOOZE/LIGHT button ( 1) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. • To turn off the snooze feature, slide the Alarm Mode selector ( 4) to OFF. Demo Alarm Press the DEMO button ( 5) to sound the alarm. THERMOMETER FUNCTIONS • Display Range: –19.9° C (Under: LL) to 49.9° C (Over: HH) • Guaranteed Range: 0° C to 40° C HYGROMETER FUNCTIONS • Display Range: 20% (Under: LL) to 90% (Over: HH) • Sensor Precision: ± 10% when temperature is 5° C to 40° C. Alarm Mode selector SNZ ( ) ON ( ) OFF Description The alarm sounds at the preset time for one minute, and up to seven more times every five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/LIGHT button (1), the alarm sounds again about five minutes later. • The indicator flashes on the display to indicate that the snooze feature is activated. The alarm sounds at the preset time for one minute. The alarm does not sound. Operation 2 GENERAL GUIDE 11111SNOOZE/LIGHT button • Press this button to illuminate the display for about • Pressing this button while the alarm is sounding stops 2323232323 + / – buttons • Use these buttons to change the setting that is flashing on 44444Alarm Mode selector SNZ: Snooze alarm on ON: Alarm on OFF: Alarm off 55555DEMO button • Press this button to sound the alarm. 66666SET button • Use this button when setting the current time. 77777RESET button • Press this button to reset the clock after replacing its battery. USING THE CLOCK 1. Press the SET button ( 6) to cycle through the setting screens as shown below. 12-hour/24-hour Setting Screen Time Setting Screen Month and Day Setting ScreenYear Setting ScreenNormal Timekeeping Screen 2. While the screen you want is displayed, use the + and – buttons ( 23) to change the flashing digits. • Holding down + or – changes the flashing digits at high speed. • You can set the year in the range of 2000 to 2069. The day of the week is set automatically in accordance with the date setting. • Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00. • Each press of + or – while the 12-hour/24-hour Setting Screen is on the display toggles between 12-hour and 24-hour timekeeping. (+ ) Increase (– ) Decrease 3. After making the settings you want, use the SET button ( 6) to display the Normal Timekeeping Screen. • The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about five minutes without performing any operation. USING THEALARM The alarm sounds when the alarm time you set You can also use the Alarm Mode selector ( 4) to select the snooze alarm feature. Setting the Alarm Time Use the + and – buttons ( 23) to set the alarm time. Pressing the + and – buttons ( 23) causes the alarm time to appear in place of the date on (+ ) Increase (– ) Decrease • Holding down + or – changes the digits at high speed. Turning the Alarm On and Off Use the Alarm Mode selector ( 4) to turn the alarm on and off, and to select the snooze feature. • The alarm time appears in place of the date on the display whenever the Alarm Mode selector ( 4) is set to ON or SNZ. • The volume of the alarm sound cycles through five levels as it sounds. Stopping the Alarm • When the alarm is sounding, press the SNOOZE/LIGHT button ( 1) to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. • To turn off the snooze feature, slide the Alarm Mode selector ( 4) to OFF. Demo Alarm Press the DEMO button ( 5) to sound the alarm. THERMOMETER FUNCTIONS • Display Range: –19.9° C (Under: LL) to 49.9° C (Over: HH) • Guaranteed Range: 0° C to 40° C HYGROMETER FUNCTIONS • Display Range: 20% (Under: LL) to 90% (Over: HH) • Sensor Precision: ± 10% when temperature is 5° C to 40° C. Alarm Mode selector SNZ ( ) ON ( ) OFF Description The alarm sounds at the preset time for one minute, and up to seven more times every five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/LIGHT button (1), the alarm sounds again about five minutes later. • The indicator flashes on the display to indicate that the snooze feature is activated. The alarm sounds at the preset time for one minute. The alarm does not sound. Operation 3 BATTERY REPLACEMENT Replace batteries whenever the display becomes to read. To replace the battery 1. Open the battery compartment cover as shown in the illustration. 2. Remove all of the old batteries. 3. Load a full set of new batteries. Make sure that their positive directions. If you load batteries incorrectly, they can burst a...