Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
SETTING ALARMS 1 & 2 the water resistant seal – voiding your warranty. 2. Press ‘A’ to return to Time Telling Mode. 1. From Time Telling Mode, press ‘B’ four times for It is important to recycle your watch battery in an Alarm 1 Mode or five times for Alarm 2 Mode. environmentally safe way. Watch batteries contain very small amounts of mercury, which is required to prevent NOTE: Both Alarm 1 and Alarm 2 can be set. When Alarm corrosion of the battery and damage to your watch. There is activated, the alarm (‘Beep Beep’) will sound at the SECOND TIME ZONE is no danger to you or your watch from the mercury because it is in the sealed battery. But you need to recycle preset time for 20 seconds or until any button is pressed. 1. From Time Telling Mode, press ‘B’ three times to enter 2. Press ‘A’. Hours flash. Press ‘C’ to advance Hours. Second Time Zone Mode. your watch battery properly. Your professional watch/ jewelry retailer is the best person to do this for you. These professionals collect used batteries and recycle them 3. Press ‘B’. Minutes flash. Press ‘C’ to advance Minutes. 2. Press ‘A’. Hours flash. Press ‘C’ to advance Hours. 4. Press ‘B’. Second Time Zone Alarm flashes. Press ‘C’ to 3. Press ‘B’. Minutes flash. Press ‘C’ to advance Minutes. select either Normal Time Zone or Second Time Zone. 4. Press ‘A’ to end set sequence. through licensed waste management companies. F indicates the Second Time Zone is selected. 5. Press ‘B’ to return to Time Telling Mode. Do our environment and your watch a favor. Ask your 5. Press ‘A’ to end set sequence. Press ‘B’ to return to watch/jewelry professional to replace your battery when it Time Telling Mode. expires. ...
Эта инструкция также подходит к моделям:Часы - 20/1277-79-81 (256.67 kb)
Часы - 20/1555 (256.67 kb)
Часы - 20/1683BLU (256.67 kb)
Часы - 20/1685GRN (256.67 kb)