Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Especially when “USER” is selected as the site, make sure that you input an accurate high tide time. • Only a “USER” site can be selected while UTC is selected as the Home City. Reference This section contains more detailed and technical information about watch operation. It also contains important precautions and notes about the various features and functions of this watch. Moon Phase Indicator The Moon phase indicator of this watch indicates the current phase of the Moon as shown below. It is based on the view of the left side of the moon at meridian transit from the northern hemisphere of the Earth. If the appearance of the Moon phase indicator is reversed from the actual Moon as viewed from your location, you can use the procedure under “To reverse the displayed Moon phase” to change the indicator. lllllllllll lllllllllll Module 3215 Module 3222 Moon Phase indicator Moon phase (part you can see) Moon Phase Indicator Moon Age Moon Phase New Moon First Quarter (Waxing) 28.7-29.8 0.0-0.9 1.0-2.7 2.8-4.6 4.7-6.4 6.5-8.3 8.4-10.110.2-12.0 12.1-13.8 Module 3215 Module 3222 (part you cannot see) Moon Phase Indicator Moon Age Moon Phase Module 3215 Module 3222 Moon phase (part you can see) (part you cannot see) 13.9-15.7 15.8-17.5 17.6-19.4 19.5-21.2 21.3-23.1 23.2-24.9 25.0-26.8 26.9-28.6 Full Moon Last Quarter (Waning) To change the Daylight Saving Time (summer time) setting 1. In the Timekeeping Mode, hold down A until the city code starts to flash, which indicates the setting screen. 2. Press C and the DST setting screen appears. 3. Press D to cycle through the DST settings in the sequence shown below. Auto DST ( ) DST off ( ) DST on ( ) Operation Guide 3215 3222 7 Tidal Movements Tides are the periodic rise and fall of the water of oceans, seas, bays, and other bodies of water caused mainly by the gravitational interactions between the Earth, Moon and Sun. Tides rise and fall about every six hours. The Tide Graph of this watch indicates tidal movement based on the Moon’s transit over a meridian and the lunitidal interval. The Tide Graph calculates and graphically represents current tide conditions in your currently selected site or USER site based on longitudes, lunar day length, and lunitidal interval preset in watch memory, and on high tide times specified by you. Tide Graph The Tide Graph graphically represents the current tide condition using one of three patterns that represent spring tide, intermediate tide, and neap tide, as shown below. Large difference between high tide and low tide. Occurs a few days before and after a New Moon and Full Moon. Medium difference between high tide and low tide. Small difference between high tide and low tide. Occurs a few days before and after the first quarter and last quarter of a half moon. Tide Name Graph Description Spring Tide Intermediate Tide Neap Tide • The Tide Graph flashes as shown below to indicate the tide range. • The segments on either end of the Tide Graph flash during low tide. Lunitidal Interval Theoretically, high tide is at the moon’s transit over the meridian and low tide is about six hours later. Actual high tide occurs somewhat later, due to factors such as viscosity, friction, and underwater topography. Both the time differential between the moon’s transit over the meridian until high tide and the time differential between the moon’s transit over the meridian until low tide are known as the “lunitidal interval”. Tide data is calculated using the lunitidal intervals preset for each site. lllllllllllll lllllllllllll Low tide High tide Button Operation Tone The button operation tone sounds any time you press one of the watch’s buttons. You can turn the button operation tone on or off as desired. • Even if you turn off the button operation tone, alarms, the Hourly Time Signal, and other beepers all operate normally. To turn the button operation tone on and off 1. In the Timekeeping Mode, hold down A until the city code starts to flash, which indicates the setting screen. 2. Press C nine times until the current button operation tone setting ( or ) appears. 3. Press D to toggle the setting between (tone on) and (tone off). 4. Press A twice to exit the setting screen. • The mute indicator is displayed in all modes when the button operation tone is turned off. lllll l l l l lll l l l l lllllllllll Mute indicator Power Saving Function When turned on, the Power Saving function enters a sleep state automatically whenever the watch is left in an area for a certain period where it is dark. The table below shows how watch functions are affected by the Power Saving function. Elapsed Time in Dark 60 to 70 minutes 6 or 7 days Display Blank, with Power Saving indicator flashing Blank, with Power Saving indicator not flashing Operation All functions enabled, except for the display Auto receive, beeper tone, illumination, and display are disabled. • Wearing the watch inside the sleeve of clothing can cause it to enter the sleep state. Power saving indicator • T...
Эта инструкция также подходит к моделям:Часы - 3215 (1.87 mb)