Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
Turn “off’ the timer with the power switch; reset a new timing cycle. Example 2: Elapsed Timer Indicator/Time Unknown. 1. Set power switch “on”. 2. Set timer control switch “off’. 3. Rotate “seconds” hand clockwise to the red “0” numeral. 4. Rotate “minutes” hand clockwise to the red “0” numeral. 5. Record an unknown timing event by putting the power switch in the “on” position at the beginning of the event. 6. Result: The timer records the elapsed time until the power switch is put in the “off position. Note: Red numerals count up; black numerals count down. PRECAUTIONS • Always set the “seconds” hands by rotating clockwise. • To prevent fire or electrical shock, do not expose to rain or moisture. • No user serviceable parts inside - do not open. • Refer servicing to qualified personnel. • Observe AC line voltage, frequency and load ratings on nameplate. REGISTER NOW Please return your GRALAB 165A Registration to the Repair Center address in the warranty, and we will let you know about future products. Email (preferred) User NO-PROOF-OF-PURCHASE LIMITED WARRANTY See label on back of unit for details, or check ACCUSPLIT, Inc. • 3090 Independence Drive, Suite 148 • Livermore, CA 94551 USA 800-935-1996 • 925-290-1900 • FAX 925-290-1930 • • support@ACCUSPLIT.com 76440 REV A...
Эта инструкция также подходит к моделям:Часы - GRALAB 165 (426.72 kb)
Часы - GRALAB 165A (426.72 kb)