Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
S1/S4S2 AOS LEL S3 M 925MX TURBO 4 SPLITS1/S4 LS2 S3 & MEL Backlight Button Wrist-Worn Stopwatch with Split Memory Operating Instructions Congratulations on your purchase of an A940MXT stopwatch for the wrist! You’re about to enjoy the convenience of having professional timing right at your fingertips when you need it, plus a regular wristwatch whenever you don’t. SETUP S2 – Stop (Display shows “SPLIT”) Most watches ship with a battery inter-S2 (2sec) – Reset** rupt in place to save battery life. Turn the watch over and use a quarter or nickle Dual Split Memory with Split Counter to twist open the battery compartment When timing an activity with pauses hatch. Remove clear plastic strip from or repeated events, you will need to underneath the battery. Replace the bat-use split timing with memories. In Turbo Set Up mode, “SPD” (Speed) tery, taking care to ensure that the posi-S2 – Start (Shows Running DUAL Time) tive (+) terminal is facing up. Replace the S2 – Split* (Top shows CUM 1, Bottom battery compartment hatch and tighten shows LAP 1) with the coin, making sure that the small S2 – Split* (shows CUM 2, Bottom shows indicator will be illuninated at bottom of display. The number you enter should correspond to the Distance or Sample Count you want to use for the Speed arrow points to the dot at the top of the LAP 2) watch case when you are finished. Peel S2 – Split* (Top shows CUM 3, Bottom the simulated display sticker off the shows LAP 3) watch face. S2 – Split* (Top shows CUM 4, Bottom or Rate Computation. “P-HR” in display means watch is set to compute “per Hour” rate, and “P-Mn” means watch is set to compute a “per Minute” rate. shows LAP 4) Your new watch has four modes of S2 (2sec) – Reset** If you want the watch to compute in “per operation: 1/100th second Memory *Split Counter always shows Current Split Sec” rate, divide the Distance or Sample Count (Strokes, Strides, Units, etc.) by Note: You can always press S1/S4 to return Stopwatch with Turbo features, a Dual to Running Time. Set-Point Timer, plus two Time-of-Day/ 60, then enter it. Date/Alarm modes. When the battery is Memory Review (before Resetting) enabled, your watch will come to life in M – Review* (Bottom shows AVE LAP For example, let’s say that you are at a stopwatch mode. Press the ( button to cycle between the modes. Your watch also has an Electro-Lumines Split,Top showsTOTAL ELAPSEDTIME) race track with a course that is one mile M – Review (Shows last DUAL Split) long. If you set the Distance to 1.00 and M – Review (Shows next DUAL Split, in the rate to “P-HR,” and then time several reverse order) laps, the Average Speed recorded by the cent (EL) backlight. Press the EL button *Reviews at any time in reverse numerical watch will be in miles per hour. to activate the backlight. order. Hold down for Rapid Review. Speed/Rate Function Operation S2 – Start (Shows Running LAP Time) STOPWATCH MODE STOPWATCH AND SPEED/RATE S2 – Split* (Top and Bottom show The watch features a professional timing The advanced “Turbo” functions on SPEED/RATE 1/LAP 1) circuit with powerful stopwatch features. the watch calculate speed or rate once S2 – Split* (Top and Bottom show This is how the display looks when in distance has been input into the watch SPEED/RATE 2/LAP 2) stopwatch mode. 0:32:29.38 0:05:03.1 1 ACCUSPLIT. S1/S4S2 AOS LEL S3 M 940MX TURBO 4 SPLITMaster Reset Its a good idea to reset the stopwatch Split Counter Split Time Lap Time (recall that Rate = Units/Time). 0 00 0.000 ACCUSPLIT. S1/S4S2 AOS LEL S3 M 940MX TURBO p-hr DISTSpeed/Rate Function Setting S2 – Split* (Top and Bottom show SPEED/RATE 3/LAP 3) S2 (2sec) – Reset LAP and SPEED/RATE to zero** *For only chance to view Total Average Speed/Rate, push M. Memory Review (before Resetting) M – Review* (Bottom shows AVE TOTAL SPEED/RATE, Top shows TOTAL Turbo Set up Display ELAPSED TIME) M – Review* (Bottom shows AVE LAP each time before use. Push S2 for 2 sec-S1(2sec) - Enter Turbo (Speed/Rate) Set Split,Top showsTOTAL ELAPSEDTIME) onds to Reset** Function M – Review (Shows last SPEED/RATE S1(4sec) – Enter set function and Reset and LAP Split) Event Timing Turbo fields to zero (as for DUAL M – Review (Shows next SPEED/RATE Event timing is the simplest form of tim-SPLIT timing) ing. It is good when you want to mea-S2 – Select field to be Set (field will and LAP Split, in reverse order) *Reviews at any time in reverse numerical sure the total time from the start to the flash) order. Hold down for Rapid Review. finish of a particular event. S3 – Set field to Desired Setting **Reset before 30 hrs. (end of range) and S2 – Start S4 – Exit Setting Function rollover. ACCUSPLIT, Inc. • 6120 Stoneridge Mall Rd., Suite 210 • Pleasanton, CA 94...
Эта инструкция также подходит к моделям:Часы - A940MXT (226.02 kb)