Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Boil-dry protection This kettle is equipped with boil-dry protection. This device automatically switches off the kettle if it is accidentally switched on when there is no water or not enough water in it. The on/off switch will move to off position and power-on light off. Let it cool down. The kettle is ready for use again. Electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). Heating up water with the preset buttons Different hot drinks require different temperatures to taste their best. With the preset buttons on the base, you can choose the right temperature for your favourite hot drink. Always fill the kettle with at least 0.25L water to make sure that the selected hot drink reaches the right temperature. The actual temperature may deviate slightly from the indicated temperature. --There are 4 buttons that represent different hot drinks: 1 Green/White tea: 80°C 2 Oolong tea: 90°C 3 Instant Coffee: 95°C 4 Black tea/Boil: 100°C --Press the power button () to turn on the kettle. --Press any temperature button to start the heating. --While the kettle heats the water to the preset temperature, the light ring around the selected button pulsates slowly until the water has reached the preset temperature. --When the water has reached the preset temperature, you hear a signal. The light ring around the selected button stops pulsating and lights up continuously. --After 2 minutes, if you haven’t used the hot water, a reminder signal will beep. Note: You can select a different type of hot drink by pressing a different button while the kettle is operating. This is only possible if the temperature of the water is still below the temperature of the newly pressed button. Note: You can deactivate the appliance by pressing the power button or by removing the kettle from the base. Keeping water warm at the preset temperature You can use the keep-warm function to keep water warm at the preset temperature for 30 minutes. To activate the keep-warm function, press the KEEP WARM button () after you have pressed the desired preset button. The light ring around the KEEP WARM button lights up continuously. When the water has reached the preset temperature, the light ring around the KEEP WARM button pulsates slowly for 30 minutes. If you want to cancel the keep-warm function, press the KEEP WARM button or remove the kettle from the base. Note: The keep-warm function keeps the water warm for 30 minutes. After this, you hear a signal and the kettle switches off automatically. Note: If you press another preset button while the keep-warm function is activated, you need to reactivate the keep-warm function as well. Descaling the kettle Depending on the water hardness in your area, scale may build up inside the kettle over time. Scale may affect the performance of the kettle. Descale the kettle regularly by following the instructions in this user manual. We recommend the following descaling frequency: --Once every 3 months for soft water areas (up to 18dH). --Once every month for hard water areas (more than 18dH). Use white vinegar (4% acetic acid) in step 6. Rinse the kettle and then boil twice (steps 10-12) to remove all vinegar. Ordering accessories To buy accessories or spare parts, visit or go to your Philips dealer. You can also contact the Philips Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details). Environment --Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. 1). Guarantee and support If you need information or support, please visit or read the separate worldwide guarantee leaflet. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, visit for a list of frequently asked questions or contact the Consumer Care Centre in your country. Problem Solution The light ring around one preset button lights up while the other light rings are off. After the water has reached the preset temperature, the light ring of the selected preset button lights up for 5 minutes. After I press the preset button, the kettle beeps three times and doesn’t light up. The temperature of the water is higher than the temperature of the selected preset button. You can add cold water to the kettle. If you wish to reheat water immediately, you can only select 100°C. The kettle activated the boil-dry protection. For details, see section ‘Boil-dry protection’ in chapter ‘Important’. I try to switch on the kettle, but it switches off automatically. The kettle activated the boil-dry protection. For details, see section ‘Boil-dry protection’ in chapter ‘Important’. You did not place the kettle on its base correctly....