According to the amplifier, set the EQ ON/OFF switch under the turntable platter. Audio cord .To AC outlet When the unit is connected to the PHONO (MM) jacks Rear panel of White the amplifier Audio cord \ I Î □ OFF E Q O N Red When the unit is connected to the AUX jacks, etc. : i □ OFF E Q O N [ AUX Rear panel of the amplifier r Caution: Do not apply oil or lubrication to the motor, tonearm, or any of the turntable’s mechanisms. I P-T400 (En) Installing the turntable belt Usi

See “Playback in a random order (RANDOM mode)” . O Programmed play order See “Programming tracks in desired order (PGM mode)” . O Timed Play, where you use an optional audio timer to automatically begin playing all CDs or only specified CDs See “Timer operation” ¤ Chapter 3 Your CD changer includes a standard remote and a remote keyboard (for easier text entry). You can use either device to control the changer. For the sake of simplicity, this manual provides standard remote instructions for all

This can decrease the operating range of your keyboard. O When pressing more than one remote control button successively, press the buttons securely by leaving an interval of 1 second or more between buttons. Keyboard Operating Range If you use the remote outside of this range, the remote will not operate correctly. As you use the remote, be aware of the following: The 10-key remote operates in the following range: DISC SKIP $ Y & ^ o PUSH OPEN ) REPEAT CONFIRM RANDOM DISPLAY TIMER PLAY OFF ON S

10-key Remote The buttons with the same name as those on the main unit operate the same way as on the main unit. The buttons marked * are provided only on the remote control unit. REMOTE CONTROL UNIT RC-P0714 T U V X Y Z W /. SPACE CHARAC.DELETE – SELECTOR ( ' DISC SKIP ) MODE SET /CLEAR /CHECK /P.MODE POWER DISC DOWN UP 7 ENTER 6 CURSOR 4 . 1 A DOWN UPLEFT RIGHT CHARACTER RANDOM DISPLAY CONFIRM A B C D E F G REPEAT BEST SELECTION 32 4 H J K L M N O P Q R S 1 76 85 +100 +1009 I Model : RC-P0714

U.FILE OE OF MDF Reorganizing discs to desired groups (USER FILE mode) Preparation Although all operations can be controlled from both the OClose the disc door. * 10-Key Remote and Keyboard remote control units, do 35 ORegister user file. U not change the remote control unit in the middle of OCheck that the unit is in the normal play TRACK mode. ) operation such as character input. Otherwise, characters may not be input correctly. Assigning user file names (FILE NAME INPUT mode) 1 1 Activate the

If you are connecting the CD changer to a receiver that supports Dual-Zone/Dual-Source listening (such as the VR-4900/KRF-V9993D shown in the illustration), connect audio cables for both outputs A and B to the appropriate jacks on the receiver. 3.Connect an optional optical digital cable from the changer to the receiver as shown to the left. If your receiver does not support digital output, skip this step. If you do not connect a digital cable or if your receiver does not support digital output

* To repeat only the desired tracks (Player A only) 1Program the desired tracks by performing steps 1 to 3 of “Programming tracks in desired order”. . 2Switch REPEAT ON. 3Start playback. To repeat one selected disc 3Start playback. Within 8 seconds! 2Select the disc number. 4Switch REPEAT ON. 1Check that the Player is in the normal play TRACK mode. ) E REPEAT ENTER 6 DISC SKIP DOWN UP ENTER 6 E REPEAT Previous disc Next disc OUp to 32 tracks can be programmed by repeating steps 1. REPEAT ON OThe

ORepeat step 2 when it is required to change the track number. Skipping tracks Searching CHARACTER/SEARCH DOWN UP 4 . To skip forwardTo skip backward OWhen the 4 key is pressed once during playback, the track being played will be played from the beginning. CURSOR L R 1 A Backward search Forward search OPlayback starts from the position where the key is released. NoteNote If it is Mechanism-B that is selected, use the main unit keys for these operations. Displays Displays scrolling Some track tit

. OWhen the SET key is pressed, one character is set and the cursor goes to the next digit. ORepeat this to enter the title name. OOne character is set and the cursor goes to the next digit. OInput the entire disc title by repeating 2 and 3 for each character. ITLTETSRO!E! OTo register the disc names of another disc, repeat the entire procedure of "To enter the disc title". OTo register another track titles in the same disc, go to step 1-2 in “To enter the track title“. . Registration of Title N

OWhen the disc corresponds to CD-TEXT, or when the disc title has been registered, the disc title will be displayed with scrolling. Discs can be selected by the disc title. “Registration of Title” ) OIf you make a mistake, press the CLEAR key and enter the disc No. from the beginning. Previous disc Next disc Within 8 seconds! 1Select the disc number. 2Set the input. Go to step 3 within 8 sec. GPMESELTCDSIC 32 4 H I J K L M N O P Q R S 1 76 85 +100 +1009 CHARAC. /P.MODE DISC SKIP DOWN UP SET SET