Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
The set returns to the normal mode. (3) Playing Programs (4) Presetting Programs • Programs can be stored in the preset memory. When a disc for which a program is preset is loaded, the programmed playback mode is set automatically. • Programs can be stored for up to three discs. PRESET FUNCTIONS AND OPERATIONS (1) List of Preset Functions • Functions can be preset using the buttons on the front panel. These presettings are stored in a permanent memory, so they are not cleared even when the power is turned off. • The functions shown on the table below can be preset. Set the functions according to the usage purpose to efficiently achieve even higher quality playback. • One of the preset functions can be used to display information on this set (microprocessor version). Preset function type Description Character display (as set upon shipment from factory) No. Preset type Selection of preset type Preset Type 1 1 Auto cue Setting of audio startup level for auto cue function CueDet.-60db 2 Auto stop Setting of whether or not to automatically stop the servo functions Sleep ON 3 FS converter Setting of whether or not to use the FS converter and sampling frequency setting (when optional FS converter mounted) FS OFF 4 Program 1 Setting of whether or not to play program 1 Program1 OFF 5 Program 2 Setting of whether or not to play program 2 Program2 OFF 6 Program 3 Setting of whether or not to play program 3 Program3 OFF 7 Digital output Selection of output signal format D.Out Pro 8 Digital output Selection of whether or not to output subcodes Subcode OFF 9 End monitor Setting of whether or not to use the end monitor function and monitor time setting End Mon. 10sec 10 E.O.M. Setting of whether or not to display the EOM and display time setting E.O.M. 10sec 11 Next track standby Setting of whether or not to standby at the next track when the STANDBY/CUE button is pressed during playback NextStb.OFF 12 Fade in time Fade in time setting Fadeln OFF 13 Fade out time Fade out time setting Fadeout OFF 14 Play speed Standard playing speed setting Normal Speed 15 Delay start Delay start time setting Delay OFF 16 Play lock Selection of whether or not to inhibit the panel switches during playback PlayLock OFF 17 Frame display Selection of whether or not to display frames FR Disp ON 18 CDR disc Selection of whether or not to play CDR discs which do not include a TOC CD-R NO TOC 19 CDR disc Selection of whether or not to play skip tracks on CDR discs CD-R Skip OFF 20 Serial remote Baud rate setting 9600bps 21 Switch protect Selection of whether or not to enable the panel switches Switch ENA 22 Player ID Selection of whether or not to set player IDs and selection of ID number PlayerlD OFF 23 Parallel remote Selection of whether or not to accept parallel remote signals Remote ENA 24 Parallel remote Selection of whether or not to output standby tally ST. Tally ON 25 Parallel remote External control tally output signal setting Index2 Tally 26 Parallel remote Fader start mode selection Fader Pause 27 Stereo/mono Selection of stereo or monaural playback Stereo 28 Pos Code Selection of whether or read Pos codes Pos OFF 29 Preset clear Setting for clearing presets and setting them to the initial values ' Init. Preset 30 Set information Microprocessor version display Ver. **** (* = number) 31 When presettings are made, the time display set with the TIME button, the play mode set with the PLAY MODE button and the finish mode set with the FINISH MODE button at that time are stored in the memory. These modes will be set when the power is next turned on. NOTE: For CDR discs without TOCs, there are no pits (signals) at the disc's lead in and lead out sections, so errors may occur, particularly when searching for tracks. If an error should occur, open the disc holder, then close it and perform the operation again. (2) Presetting Procedure • Functions can be preset using the buttons on the front panel. • The presettings can also be set using serial remote signals (RS232C/RS422A1. • Make the presettings with no disc loaded, in the stop or standby mode. (3) Detailed Description of Preset Functions (* = initial setting) 1) "Preset Type (*1" (Three different sets (types) of presettings can be made and used for different purposes.) * Preset Type1 : Set to preset type 1. Preset Type2 : Set to preset type 2. Preset Type3 : Set to preset type 3. 2) "CueDet. (-**) dB" CueDet. (-**) dB : Set the audio detection level for cueing. (-72/-66/*-60/-54/-48/-42/-36) 3) "Sleep ON (OFF)" * Sleep ON : Automatically turn the servo functions off if no button is operated for 30 minutes in the pause, standby or manual search mode. Sleep OFF : Do not automatically turn the servo functions off. 4) "FS OFF (***kHz)" (This setting can only be made when an optional FS converter is mounted.) * FS OFF : Do not use the FS converter. FS (***kHz) : Select the digital output FS. (32kHz/44.1 kHz/48kHz) 5) "Programl OFF (ON)" Programl OFF (ON) : Store the contents of program 1 when on...