Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
All Rights Reserved. CONTENTS 1. INTRODUCTION 2. Features 3. Specifications 4. Hardware Installation Guide 5. Control Panel MENU OVERVIEW GUIDE 1. Copy 2. Test 3. Copy & Verify 4. Copy & compare 5. Verify 6. Compare Disc 7. Burn Speed 8. Select Source 9. Audio Track Edit 10. Utility 10.1 Pre-scan 10.2 Quick Erase 10.3 Full Erase 10.4 Eject All Disc 10.5 Disc Info 10.6 Drive Info 10.7 System Info 10.8 Update BIOS 11. Sep Up 11.1 Power On Time 11.2 Auto Start 11.3 Startup Menu 11.4 Write Method 11.5 Button Beep 11.6 Clear Setup 12. Image Manager 12.1 Select Image 12.2 Disc to Image 12.3 Reader Speed 12.4 Image Info 12.5 Delete Image 12.6 HDD Info 12.7 Format HDD 12.8 About HDD Manager Copyright © 2005 by ILY Enterprise, Inc. All Rights Reserved. 1. INTRODUCTION The Athena series duplicator is a stand-alone CD/DVD Disc Duplicator Controller that provides support for up to 7 CD/DVD discs. There are 8 IDE ports on the controller and each IDE port is independent from one another. Therefore, the controller can control several CD/DVD devices at the same time. The drives do not have to be of the same brand or speed. The controller can support up to 7 discs duplicating simultaneously at maximum 56x CD writing and 16X DVD writing speedsD The easy-to-use operating control panel consists of a LCD screen and 4 buttons. All operating messages and information, such as the function list, instructions, operating status, or error message(s), will display in real time on the screen. The built-in Hard Drive will allow users to load many CD/DVD Master Source Discs onto the HDD as source disc images. Loading a disc image onto the HDD will reduce the risk of damaging the Source Disc due to heavy duplicating jobs. An intelligent and dynamic HDD management system will dynamically assign HDD partitions to each CD/DVD disc image loaded onto the HDD according to their actual capacity requirement. This smart HDD manager will ensure a flexible and efficient HDD management. 2. FEATURES: ☆ 1 to 7 IDE-to-IDE CD\DVD Disc Duplicator Controller ☆ Auto-detect IDE devices. ☆ 2x16 LCD display and 4 control buttons. ☆ Supports up to max 56x CD duplication, 8x / 16x DVD duplication ☆ Flexibility in setting different duplication speeds based on various Disc writers. ☆ It is easy to select any Drive as the Master Reading Source. ☆ Support for an IDE Hard Drive Device. You can load master source CD or DVD discs onto the Hard Drive as a disc images. ☆ Support for Audio Track editing. Combine your favorite audio tracks into one customized CD. ☆ Special Pre-Scan feature can evaluate the master source disc before copying. ☆ Support for copying simulation to prevent any failures caused by bad blank discs or bad source discs. ☆ Support for a Verification function to ensure copied disc’s readability Supports all major disc types Auto detect source disc Can set button beep on or off ☆ Firmware is easily updateable. Just place an update CD in any drive and within a few seconds, the firmware is quickly updated. Copyright © 2005 by ILY Enterprise, Inc. All Rights Reserved. 3. SPECIFICATION Power Voltage: 5V+-5% Current: 0.7A Max Environment Working Temperature 0C~75C Storage Temperature -20 C~85 C Humidity Working Humidity 20%~80% Storage Humidity 5%~95% Dimension Length 176 mm Height 42 mm Width 146 mm Model Max Burn CD SPEED Max Burn DVD SPEED Buffer Memory Size Total IDE Port Number Athena CD 56X No 16/64 MB 8 Athena DVD 56X 8X/16X 64 MB 8 Copyright © 2005 by ILY Enterprise, Inc. All Rights Reserved. 4. HARDWARE INSTALLATION GUIDE This section will show you how to set IDE devices as the Optical READER, WRITERS, and Hard Drives. The system will auto detect your drives and assign Drive numbers. READER WRITER HDD System Setting Information 1 Installed Installed No After you turn on the machine, the system will automatically detect and assign the READER drive as the Source Reader and set as Drive #1. All WRITERS will be set numbered by sequence after the READER drive, beginning from Drive#2, Drive#3, etc. 2 No Installed No After you turn on the machine, the system will automatically assign the WRITER drive connected to Port#1 of the controller as the Source Reader and set as Drive#1. The rest of the WRITERS will then be set as Writers and will be assigned numbers following their sequence beginning from Drive#2 onwards. 3 No Installed Installed After you turn on the machine, the system will automatically assign the WRITER drive connected to HDD the Source Reader function. It will be assigned Drive#1. Then, the rest of the WRITERS will be set as Writers and assigned numbers in sequence beginning from Drive#2, Drive#3, etc. 4 Installed Installed Installed When all Drives are installed, make sure the READER drive is connected to the HDD. The READER will be set as the Source Reader and be assigned as Drive#1. WRITERS will be set as Writer and assigned number by sequence from Driv...