Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
. The "Rep-1" indicator lights. . To cancel the one-track repeat mode, press the REPEAT button four times. To Display Text (SACD CD only) With SACDs that contain text information, the text information included on the disc can be displayed while in either the stop or play mode. 1. Press the TEXT DISPLAY button while in the stop mode. . The album title scrolls on the display. 2. Then press the PLAY button. . The title of the track currently playing scrolls on the display. . When a track is switched while its track title is being displayed, the new track’s title is scrolled. . "NO TEXT" is displayed if the TEXT DISPLAY button is pressed when a disc not containing text information is loaded. SETTING THE TOP PRIORITY PLAYBACK LAYER (SACD ONLY) The factory default setting for the top priority playback of the SACD disc layer is the SACD (stereo) layer. The user can change the SACD disc layer for top priority playback after the disc is loaded. CD 303T SACD SUPER AUDIO CD PLAYER Professional Version DIGITAL OUTPUT ANALOG OUTPUT TUBE POWER SAMPLE-RATE CONVERTER OUTPUT 2CH/MULTI CH CD/SACD USB COAXIAL TOSLINK OPEN/CLOSE PLAY STOP PREV. NEXT 1 3 1. Press the POWER button to turn the power on. 2. Check that the disc is loaded. 3. Press the 2CH/MULTI CHANNEL button and switch to the desired layer. . When an SACD disc is loaded after the setting has been made, the contents recorded on the set layer are displayed. . If a disc not containing the layer set for top priority playback is loaded, the contents recorded on another layer are displayed automatically. . This setting is stored in the memory and is not cleared, even when the disc holder is opened or closed or the power is turned off. To change the setting, repeat the procedure above. USING AS A DIGITAL TO ANALOG (D/A) CONVERTER CD 303T SACD SUPER AUDIO CD PLAYER Professional Version DIGITAL OUTPUT ANALOG OUTPUT TUBE POWER SAMPLE-RATE CONVERTER OUTPUT 2CH/MULTI CH CD/SACD USB COAXIAL TOSLINK OPEN/CLOSE PLAY STOP PREV. NEXT 1 2 1. Press the POWER button to turn the power on. 2. Press the desired digital input button: USB, COAXIAL, or TOSLINK button. 3. At startup, the USB / COAXIAL / TOSLINK displays the following: . A-OUT: NONE . D-IN: NONE . D-OUT: NONE After initializing, the Analog-Out is the first to appear on the display, then the external digital input sampling frequency appears. The USB / COAXIAL / TOSLINK displays will show as follows: . A-OUT: 192 kHz . D-IN: 192 kHz . D-OUT: 192 kHz Digital input signal can be output in digital format and analog format. Only linear PCM signals with a sampling frequency of 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 176.4 kHz or 192 kHz can be played on this setting. Do not input any digital signal other than linear pulse code modulation (PCM) signals such as CD- ROM, Dolby Digital, and DTS signals. Doing so will generate output noise that could damage the speakers. When the digital sampling frequency is switched, the muting circuit is activated for 1 or 2 seconds, so the sound will stop momentarily and then start again each time the digital sample rate is changed. USE WITH A WINDOWS COMPUTER If your Windows computer does not meet these minimum requirements, you may experience lagging of audio and possible freezing of your computer during operation: . Microsoft Windows XP (with SP2) or Microsoft Windows Vista or Microsoft Windows 7 . Available USB 2.0 port (High speed for USB2.0) . Intel Pentium 4 processor or equivalent AMD Athlon processor . Motherboard with Intel or VIA chipset . 5400 RPM or faster hard disc drive (7200 RPM or Faster with 8MB cache recommended) . 256MB or more of RAM (512MB recommended) PC-DRIVE INSTALLATION To use the CD303T SACD Professional Version USB port efficiently on any computer, it is important to install all the necessary drivers from the Cary Audio website. We advise users to read all instructions carefully before beginning the installation process, as they will be asked to disconnect and reconnect their CD303T SACD Professional Version. Starting the PC Driver Installation: 1. Download the CARY USB Driver from 2. Unzip the CARY USB Driver. 3. Double click CARY USB setup.exe to begin the installation. 4. Click NEXT to install the CARY USB Driver on your computer. 5. Click INSTALL to begin the installation. 6. Click FINISH to complete the setup wizard. 7. Connect your USB cable from the component to your computer. 8. After connecting the component to your PC, the computer should make a tone signifying that a new device has been connected. 9. The PC Driver installation is complete and the component can be used. APPLE COMPUTER COMPATABILITY Apple computers can transmit a 24/192 kHz signal to the CD 303T over the optical inputs. Most of the recent model Apple computers contain a mini optical digital audio output that can transmit 24/192 kHz high-resolution audio files to the CD 303T. However, a USB driver capable of accepting a 24/192 kHz signal has not yet been created for Apple computers....