Оценок - , средний балл: ( )

Инструкция по эксплуатации Sony, модель CDP-CX240

Производитель: Sony
Размер: 421.67 kb
Название файла:

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Press >10. PROGRAM1 CD1 DISC TRACK STEP 20--102 5 Press the number button of the track. When the disc has more than 10 tracks, press 0 first then press the corresponding number to enter a track number from 1 to 9. The disc being programmed DISC >10 CHECK · PROGRAM Number buttons ENTER CLEAR The track being programmed Playing order Playing CDs Playing CDs 6 To program other discs/tracks, do the following: To program Repeat Steps All tracks of another disc(s) 2 to 4 Other tracks on the same disc 5 Other tracks on other discs 2 to 5 7 Press ato start Program Play. To cancel Program Play Press CONTINUE. Checking the programmed order You can check your program before or after you start playing. Press CHECK. Each time you press this button, the display shows the disc and track number of each step in the programmed order. (When a whole disc is programmed as one step, “ALL” appears instead of the track number.) After the last step in the program, the display shows “– END –” and returns to the original display. Changing the programmed order You can change your program before you start playing. To You need to Erase a track or disc Press CHECK until the track or disc you do not want appears in the display, then press CLEAR Erase the last track or disc in the program Press CLEAR. Each time you press the button, the last track or disc will be cleared. Add tracks or discs to the end of the program Follow the programming procedure Change the whole program completely Hold down CLEAR until “CLEAR” appears in the display to erase the whole program, then create a new program following the programming procedure Erasing the program stored in memory 1 Press PROGRAM repeatedly in the stop mode until the program number (PROGRAM 1, 2 or 3) you want to erase appears in the display. 2 Hold down CLEAR until “CLEAR” appears in the display. Playing Using a Timer (CDP-CX240 only) You can start playing a disc at any time you want by connecting a timer (not supplied). Please also refer to the instructions for the timer if you need help. TIMER Play mode buttons 1 Press one of the play mode buttons to select the play mode you want. 2 Set TIMER on the player to PLAY. 3 Set the timer to the time you want. The player turns off. When the set time comes, the player turns on and starts playing. 4 After you have used the timer, set TIMER on the player to OFF. Playing CDs Playing CDs Controlling Another CD Player (Advanced Mega Control) (CDP-CX240 only) This unit can control a second CD player (see “Connecting Another CD Player” on page 6). Even when a second CD player is connected, the controls on both of the units will function. When you press the play button on either unit, the operating player stops and the resting player starts. Make sure “2nd DETECTED” appears in this player’s display after turning on both players. Note that depending on the player, you may not be able to operate all the functions of the second CD player. The controls indicated in the illustration below are effective while the MEGA CONTROL button is lit. Play mode buttons (CONTINUE/SHUFFLE/ PROGRAM/REPEAT) MEGA CONTROL INPUT JOG ­/±p aP 1 Press MEGA CONTROL on this player. The MEGA CONTROL button and “2nd” in the display light up. The display shows the current disc number or disc memo of the second player. ALL DISCS 4 CD1 2nd DISC *DISC-4* Current disc number or the Disc Memo 2 Select the play mode you want. To program tracks, use the controls on the second player. You cannot change the second CD player’s ALL DISCS Play mode to 1 DISC Play mode, and vice versa, by using the play mode button on this player. 3 Press aon this player to start playing. The play starts and the display shows the current disc and track numbers and the playing time of the track. While the MEGA CONTROL button is lit, you can control the second player with the controls on this player. To control the second player directly using the supplied remote Set CD 1/2/3 on the remote to CD 3 which is the same position as the COMMAND MODE selector on the rear panel of the second player. To control this player again Press MEGA CONTROL. The MEGA CONTROL button goes off and you can control this player. Loading the Disc Memos of the second CD player If the second CD player has the Disc Memo function (see page 23), you can load the Disc Memos of the second CD player to this player’s memory and display them on this player. 1 Press INPUT. 2 Turn the JOG dial until “LOAD 2ND MEMO” appears in the display. ALL DISCS CD1 LOAD 2ND MEMO 0/) Playing CDs Playing CDs 3 Push the JOG dial. This player starts loading. (Loading takes about one minute.) Note If each Disc Memo of the second CD player has more than 13 characters, the first 13 characters of each are loaded to this player. Labeling discs of the second CD player You can label discs of the second CD player or change the Disc Memos loaded from the second CD player. 1 Press MEGA CONTROL. The MEGA CONTROL button lights up. 2 Turn the JOG dial to select the disc you want to assi...