Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Creating Your Own Program (Program Play) You can arrange the order of the tracks and/or discs to create three different programs and the programs are stored automatically. AEprogram can contain up to 32 “steps” — one “step” may contain a track or a whole disc. You can also create programs by different procedure using the remote. You can use both the front panel and the on-screen display information when programming in either procedure. Creating a program on the player PROGRAM /± ENTER JOG a CHECK CLEAR Playing CDs Playing CDs 1EPress PROGRAM until the program number you want (PROGRAME1, 2 or 3) appears in the front panel display. If a program is already stored in the selected program number, the last step of the program appears in the front panel display. When you want to erase the whole program, hold down CLEAR until “ALL CLEAR” appears in the front panel display (see page 20). 2ETurn the JOG dial until the disc number you want appears in the front panel display. DISC PROGRAM1 CD2 2O *DISC-2O* DISC TRACK STEP 2O ALL 1 3ETo program a whole disc, skip this step. Press /± until the track number you want appears in the front panel display. DISC PROGRAM1 CD2 2O *DISC-2O* DISC TRACK STEP 2O 3 1 Track number 4EPress ENTER or PROGRAM. The track being programmed DISC PROGRAM1 CD2 2O *DISC-2O* DISC TRACK STEP 2O 3 1 The disc being Playing order programmed 5ETo program other discs/tracks, do the following: To program Repeat Steps Other discs 2 and 4 Other tracks on the same disc 3 and 4 Other tracks on other discs 2 through 4 6EPress ato start Program Play. To cancel Program Play Press CONTINUE. The programs remain even after Program Play ends When you press the abutton, you can play the same program again. When you press PROGRAM during Continuous or Shuffle Play The program will be played after the current track. The programs remain until you erase them If you replace discs, the programmed disc and track numbers remain. So, the player plays only the existing disc and track numbers. However, the disc and track numbers that are not found in the player or on the disc are deleted from the program, and the rest of the program is played in the programmed order. When connected to the second player, you can program tracks/discs of both players in the same program When selecting a disc, press PLAYER SELECT repeatedly until “2nd PLAYER” appears in the front panel display. Then select the disc you want to program. Creating a program using the remote Z PROGRAM DISC/CAPS TRACK/SPACE Number buttons ENTER CLEAR CHECK · 1EPress PROGRAM until the program number you want (PROGRAM 1, 2 or 3) appears in the front panel display. 2EPress DISC/CAPS. DISC PROGRAM1 CD2 2O *DISC-2O* DISC-[ _] (Continued)E Playing CDs Playing CDs 3EPress the number button of the disc. DISC PROGRAM1 CD2 2O *DISC-2O* DISC-[ 2O] 4ETo program a whole disc, skip this step and go to Step 6. Press TRACK/SPACE. DISC PROGRAM1 CD2 2O *DISC-2O* TRACK-[ _] 5EPress the number button of the track. DISC PROGRAM1 CD2 2O *DISC-2O* TRACK-[ 3] 6EPress ENTER. The track being programmed DISC PROGRAM1 CD2 2O *DISC-2O* DISC TRACK STEP 2O 3 1 The disc being Playing order programmed 7ETo program other discs/tracks, do the following: To program Repeat Steps Other discs 2, 3 and 6 Other tracks on the same disc 4 through 6 Other tracks on other discs 2 through 6 8EPress ato start Program Play. To cancel Program Play Press CONTINUE. Checking the programmed order You can check your program before or after you start playing. Press CHECK. Each time you press this button, the front panel display shows the disc and track numbers of each step in the programmed order. (When a whole disc is programmed as one step, “ALL” appears instead of the track number.) After the last step in the program, the front panel display shows “END” and returns to the original display. Changing the programmed order You can change your program before you start playing. To You need to Erase a track or disc Press CHECK until the track or disc you do not want appears in the front panel display, then press CLEAR Erase the last track or disc in the program Press CLEAR. Each time you press the button, the last track or disc will be cleared. Add tracks or discs to the end of the program Follow the programming procedure Change the whole program completely Hold down CLEAR until “ALL CLEAR” appears in the front panel display to erase the whole program, then create a new program following the programming procedure Erasing the programs stored in memory 1EPress PROGRAM repeatedly in the stop mode until the program number (PROGRAM 1, 2 or 3) you want to erase appears in the front panel display. 2EHold down CLEAR until ”ALL CLEAR” appears in the front panel display. Playing CDs Playing CDs Creating programs while checking the on-screen display information While creating programs You can select the discs/tracks by checking the titles. While selecting a disc, the on-screen display shows the disc titles in the order of the disc numbe...
Эта инструкция также подходит к моделям:CD-проигрыватели - CDP-CX270 (1.11 mb)