Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
For MP3: first press ALBUM/PRESET /+ to find your album. • In the pause/stop position, press 2/ ; to star t playback. Finding a passage within a track 1 During playback, press and hold . or § . . The CD is played at high speed and low volume. 2 When you recognize the passage you want, release . or § to resume normal playback. CD/MP3 Player Different play modes: RANDOM and REPEAT (see 7 – 9) RANDOM – tracks of the entire disc are played in random order – plays the current track continuously REPEAT ALL – repeats the entire disc/ programme For MP3 only: REPEAT ALBUM – all tracks of current album play repeatedly. 1 To select play mode, press MODE once or more. For RANDOM: select the mode before playback 2 Press PLAY/PAUSE 2/ ; to star t playback. if in the stop position. 3 To select normal playback, press MODE repeatedly until the various modes are no longer displayed. Helpful hints: In shuffle mode, press . to go to the beginning of current track. Programming track numbers You may store up to 20 tracks in the desired sequence. If you like, store any track more than once. For Audio CD: 1 In the stop position, press PROG to activate programming. . Display: MEMORY and 00 flash. 2 Press . or § to select your desired track number. . Display: MEMORY and your desired track number flash. 3 Press PROG to store the desired track number. . Display: MEMORY and 00 flash for you to programme the next track. 4 Repeat steps 2 to 3 to select and store all desired tracks in this way. . Display shows -- after 20 tracks are stored For MP3: 1 In the stop position, press PROG to activate programming. . Display: ALBUM and current album number . Then, MEMORY and 000 flash. 2 If necessary, press ALBUM/PRESET -/+ to select another album . Display: ALBUM and selected album number (see 0) . Then, MEMORY and 001 flash (see ! ) 3 Press . or § to select your desired track number. . Display: MEMORY and the selected track number in current album 4 Press PROG to store the desired track number. . Display: MEMORY and 000 flash for you to programme the next track (see @ ) 5 Repeat steps 2 to 4 to select and store all desired tracks in this way. . Display shows -- after 20 tracks are stored. 6 To play your programme, press 2/; . Helpful hints: – When playback of your programme comes to the stop position, your set will return to normal playback. To re-enter program mode, press PROG/MEMORY in the stop position. – When the programme or RANDOM mode is active, use of the ALBUM/PRESET -/+ keys are void. CD/MP3 Player Cassette Recorder Reviewing the programme In the stop position, press PROG repeatedly to see your stored track numbers. . Audio CD: a stored track number appears MP3: ALBUM and an album number appear, then a stored track number in the album is displayed – only track number appears if in the same album Erasing the programme You can erase the contents of the memory by: – selecting TUNER or TAPE sound source; – opening the disc door ; – in the stop position, press PROG to enter program mode and then, press 9. Cassette playback 1 Push the Source selector slider to TAPE 2 Press STOP• EJECT 9/ to open the cassette holder and inser t a cassette and close the deck. 3 Press PLAY 1 to star t playback. . Display lights up blue and shows TAPE throughout tape operation. 4 To pause playback press PAUSE ; . To resume, press the key again. 5 By pressing F.FWD/REW 5 or 6, fast forwading/ rewinding of the tape is possible in both directions. To stop fast winding, press 9// . 6 To stop the tape, press 9// . Helpful hints: – During playback, the keys are automatically released at the end of a tape and the set is switched off (unless PAUSE ; mode has been activated.) – During fast forwarding/rewinding, the keys will not be released at the end of a tape. To switch off the set, make sure the cassette keys are also released. General information on recording • Recording is permissible insofar as copyright or. other rights of third par ties are not infringed. • For recording, use only NORMAL type cassettes (IEC type I) on which the tabs have not yet been broken. This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. • The best recording level is set automatically. Altering the VOLUME or DBB will not affect the recording. • To protect a tape from accidental erasure, break out the tabs. If you wish to record again, cover the tabs with a piece of adhesive tape. Recording from the CD Player 1 Select CD source. 2 Inser t a CD and if desired, program track numbers. 3 Press 9/ / to open the cassette holder. Inser t a blank tape and close the deck. 4 Press REC 0 to star t recording. 5 Press PLAY/PAUSE2; on the set to star t CD playback. 6 For brief interruptions press ; .To resume recording, press ; again. 7 To stop recording, press 9// . Recording from the Radio 1 Select TUNER source. 2 Tune to the desired radio station (see Tuning to radio stations). 3 Follows steps 3, 4, 6,7 under Recording from the CD Player. Maintenance (see # ) CD p...