Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
. The display shows ALBUM and current album number briefly (See 5) • In the pause/stop position, press PLAY/PAUSE 2/ ; to star t playback.. Finding a passage within atrack 1 During playback, press and hold § or . . . The CD is played at high speed and low volume. 2 When you recognize the passage you want, release § or . to resume normal playback. Different play modes: REPEAT and RANDOM ( See 6 - 8) REP. – plays the current track continuously REP. ALL – repeats the entire disc/ program RAND – tracks of the entire disc are played in random order For MP3 only: REP. ALBUM – all tracks of current album play repeatedly. 1 To select play mode, press MODE once or more. . The display shows the selected mode. 2 Press PLAY/PAUSE 2/ ; to star t playback. if in the stop position. 3 To select normal playback, press MODE repeatedly until the various modes are no longer displayed. – You can also press STOP 9 to cancel your play modes.. CD/MP3 Player Programming track numbers You may store up to 20 tracks (for MP3: 10 tracks) in the desired sequence. If you like, store any track more than once. For Audio CD: 1 In the stop position, press PROG to activate programming. . Display: PROG and P01 flash, indicating the star t of the program. (See 9) 2 Press § or . to select your desired track number. . Display: PROG and your desired track number flash. 3 Press PROG to store the desired track number. . Display: PROG and P02 flash, indicating the next program location available. 4 Repeat steps 2 to 3 to select and store all desired tracks in this way. . Display shows PROG--- after 20 tracks are stored 5 To play your programme, press PLAY/PAUSE 2/; . For MP3: 1 In the stop position, press PROG to activate programming. . Display: PROG and P01 flash, indicating the star t of the program. 2 If necessar y, press ALBUM+ /- to select another album . Display: ALBUM and selected album number (See 0) 3 Press § or . to select your desired track number. . Display: the selected track number in current album 4 Press PROG to store the desired track number. . Display: PROG and P02 flash, indicating the next program location available. 5 Repeat steps 2 to 4 to select and store all desired tracks in this way. . Display shows PROG--- after 10 tracks are stored. 6 To play your programme, press PLAY/PAUSE 2/; . Helpful hints: – When the PROG or RAND mode is active, use of the ALBUM+ /- keys are void. Reviewing the program In the stop position, press PROG repeatedly until you enter the empty program location . The display shows the occupied program locations . After the empty program location is displayed, all the stored tracks appear in sequence. MP3 only: ALBUM and an album number appear, then a stored track number in the album is displayed. Helpful hints: – Display shows P01 if no track isprogrammed. Erasing the program You can erase the contents of the memor y by: – pressing STOP 9 (twice during playback or once in the stop position); – selecting TUNER or TAPE sound source; – opening the disc door ; . Display: PROG disappears. Cassette Recorder Cassette playback 1 Push the Source selector slider to TAPE 2 Press STOP• EJECT 9/ / to open the cassette holder and inser t a cassette and close the deck. 3 Press PLAY 1 to star t playback. 4 To pause playback press PAUSE ; . To resume, press the key again. 5 To stop the tape, press 9// . Fast forwarding/rewinding 1 Press F.FWD/REW 5 or 6 unti you reach your desired passage. 2 Press 9// to stop fastforwarding/rewinding. Helpful hints: – During playback, the keys are automatically released at the end of a tape and the set is switched off (unless PAUSE ; mode has been activated.) – During fast forwarding/rewinding, the keys will not be released at the end of a tape. To switch off the set, make sure the cassette keys are also released.. General information on recording • Recording is permissible insofar as copyright or. other rights of third par ties are not infringed. • For recording, use only NORMAL type cassettes (IEC type I) on which the tabs have not yet been broken. This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. • The best recording level is set automatically. Altering the VOLUME or BASS BOOST will not affect the recording. • To protect a tape from accidental erasure, break out the tabs. If you wish to record again, cover the tabs with a piece of adhesive tape. Recording from the CD Player 1 Select CD/MP3 source. 2 Inser t a CD and if desired, program track numbers. 3 Press 9/ / to open the cassette holder. Inser t a blank tape and close the deck. 4 Press REC 0 to star t recording. 5 Press PLAY/PAUSE2; to star t CD play back. 6 For brief interruptions press ; .To resume recording, press ; again. 7 To stop recording, press 9// . Recording from the Radio 1 Select TUNER source. 2 Tune to the desired radio station (see Radio reception). 3 Follows steps 3, 4, 6,7 under Recording from the CD Player.. Maintenance (see ! ) CD player and CD handling • If the CD player can...