Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
CD-204/203/DPF-R4010/R3010 P.C. indicator light up. P.C. 5 TRACK NO. AFILE4 DISC NO. During normal EDIT: OWhen the CHECK key is pressed, the track Nos. of edited songs will automatically be displayed in the order they are edited. During MULTI EDIT: OEvery time the CHECK key is pressed, the track Nos. are displayed in the edited order. Playing or recording the edited contents 6 To clear the edited contents Press any one of these keys. Do this operation in the stop mode. During MULTI EDIT: P.MODE CLEAR 0 CLEAR Main unit Remote control unit (CD-206/DPF-R6010 only) During Normal EDIT: P.MODE When recording the edited content onto a tape, it is recommended to use the synchro recording or CCRS recording function of KENWOOD cassette decks. ODo not adjust the output level from this unit particularly during recording. OFor details, see the instruction manual of the cassette deck. NoteNote Press the 6 key to start playback according to the edited content. The playback pauses at the beginning of the track edited for tape side B. Press the 6 key again to continue playback. OThe edited data is cleared entirely. NotesNotes 1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or the last track on side A or side B may be cut short. 2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music. Timer operations CD-206/204/203/DPF-R6010/R4010/R3010 (En) Timer playback of CD can be started at any time using an audio timer which is available in audio stores. Preparation OConnect the power cords of the associated components so that their power can be turned ON through the audio timer. (Also, be sure to read carefully the instruc- tion manual of the timer.) 23 This unit System control cord Audio cord Amplifier Audio timer To wall AC outlet 12 : 00 1 Turn the powers of the associated components OIf the amplifier is not connected to the CD player through a system ON. control cord, select the "CD" input with the input selector. 2 2 Preparation Load a disc in the CD player. 9Set the amplifier volume.3Label side 1Play the disc. Set the timer ON time.42Adjust the amplifier volume. (Use the remote control unit (Except CD- 203/DPF-R3010) of this unit to adjust the volume to the maximum level.) 3Stop the disc. 6 7 NoteNote Adjusting the volume: Set the volume the maximum (0 dB) using the OUTPUT (UP) key on the remote control unit (Except CD-203/DPFR3010) , and adjust the volume to the desired level on the amplifier side. (Since the sound output is at the maximum level when the power is turned on, lowering the level with the remote control unit will change the volume.) Set the timer so that it supplies power at the specified time. OWith some audio timer models, the power is automatically turned OFF when the timer ON time is set. With such a model, skip step 5 below. Turn OFF the power output from the audio timer. ODo not touch the ON/STANDBY (POWER/ ) switches of the amplifier and CD player. OWhen the set time comes, the disc playback starts automatically. NotesNotes 1. Some amplifiers cannot be used with a timer. Before using a amplifier, check it. 2. When operating the unit other than CD player using an audio timer, be sure to remove the disc from the CD player. Maintenance CD-206/204/203/DPF-R6010/R4010/R3010 (En) Never play a cracked or warped disc. Cleaning If fingerprints or foreign matter be- come attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards, in a radial manner. Storage When a disc is not to be played for a long period of time, remove it from the CD player and store it in its case. Label side Playing side Sticky paste Sticker During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent. Please do not use discs which are not round because they may cause a malfunction. ODo not attach paper or tape to either the playing side or the label side of compact discs. OThe paste left on the label surface after a sticker has been peeled off is a factor which may cause malfunc- tion. If the surface is sticky due to remaining paste, be sure to clean it with alcohol before use. Discs which can be played with this unit CD (12 cm, 8 cm) (CD-TEXT support), CDV (only the audio part) OWith CD-G (CD Graphics) discs, this unit can play only the audio part. Before transporting or moving this unit, carry out the following operations. 1. Turn the unit ON but do not load a disc. 2. Wait a few seconds and verify that the display shown appears. 3. Press the 0OPEN/CLOSE key to open the disc tray completely. 4. Press the 0 OPEN/CLOSE key again to close the tray. 5. Wait a few seconds and set the unit to STANDBY mode. NOIDCSDisc handling precautions Cleaning Do not use volatile solvents such as alcohol, paint thinn...
Эта инструкция также подходит к моделям:CD-проигрыватели - CD-203 (617.67 kb)
CD-проигрыватели - CD-206 (617.67 kb)
CD-проигрыватели - DPF-R3010 (617.67 kb)
CD-проигрыватели - DPF-R4010 (617.67 kb)