Войти:
Оценок - 2, средний балл: 5 ( )

Инструкция по эксплуатации Clarion, модель DRB465D

Производитель: Clarion
Размер: 547.38 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Use of such discs will cause misoperation or damage. Do not expose compact discs to direct sunlight or any heat source. Note: • Do not use commercially available CD protection sheets or discs equipped with stabilizers, etc. These may get caught in the internal mechanism and damage the disc. 6 DRB4675/DRB3S75/RDB465D/R0B365D 6. DCP (Detachable Control Panel) The control panel can be detached to prevent theft. When detaching the control panel, store it in the included DCP case to prevent scratches. We recommend taking the detachable control panel with you when leaving the car. Removing the DCP 1. Turn off the power. 2. Press the DCP Release button [7]. * The DCP is unlocked. 3. Remove the DCP. ' The DCP can easily be damaged by shocks. After removing it, place it in a protective case and be careful not to drop it or subject it to strong shocks. > When the release button is pressed and the DCP is unlocked, the car’s vibrations may cause it to fall. To prevent damage to the DCP, always store it in a protective case after detaching it. > The rear connector that connects the source unit and the DCP is an extremely important part. Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc. Attaching the DCP Insert the DCP into the right side of the source unit and press the left side to lock it. Note: • If the DCP is dirty, wipe off with a soft, dry doth only. Do not insert the DCP from the left side. Doing so may damage it. Storing the DCP in the DCP Case Hold the DCP, in the orientation as shown in the figure below, and put it into the supplied DCP case. (Ensure the DCP is in the correct orientation.) DRB4675/DRB3S75/RDB465D/RD8365D 7 Operating range: 30° in all directions Remote Control Unit — Signal transmitter ■Ш ■BE ■m Note: • The remote control function is only available on the DRB4675 and RDB465D. The remote control function is not provided with the DRB3675 and RDB365D. Inserting the Batteries_ 1. Turn the remote control unit over, then slide the rear cover in the direction of the arrow. 2. Insert the AA (UM-3/1.5 V) batteries that came with the remote control unit facing in the directions shown in the figure, then close the rear cover. Notes: Using batteries improperly can cause them to explode. Take note of the following points: • When replacing batteries, replace both batteries with new ones. • Do not short-circuit, disassemble or heat batteries. • Do not dispose of batteries into fire or flames. • Dispose of spent batteries property. 0- Sb lr_ V t.) 1 . 1 MUTE I IS Л-. 1 sT ISH OISP ПСР4 RPT RDM 4- ) U — Clarion 8 DRB4675/0RB3675/RDB4650/RDB365D Functions of Remote Control Unit Buttons Mode Button Radio CD 51 FUNC Turns power on and off. When pressed and held for 1 second: Turns power off. Switches between radio and CD. EZl BAND DISC UP PROG TOP Switches reception band. Plays the first track. Top play. 11 VOLUME Increases and decreases volume (in all modes). H SEARCH Moves preset channels up and down. Moves tracks up and down. When pressed and held for 1 second: Fast-forward/fast-backward. g PLAY/PAUSE Turns mute on and off. Switches between playback and pause. US MUTE Turns mute on and off. Switches between playback and pause. m ISR Recalls ISR radio station in memory. Press and hold for more than 2 seconds: Stores current station into ISR memory (radio mode only). M DISP Switches among main display, sub display and clock display. H SCAN PS/AS Preset scan. When pressed and held for 2 seconds: Auto store. Scan play. H RPT BLS No function. Repeat play. H RDM DOLBY NR MONI No function. Random piay. * Some of the corresponding buttons on the source unit and remote control unit have different functions. DRB4675/DRB3675/RDB465D/RDB365D 9 8. OPERATION Note: • Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold). Basic Operations When this unit is turned on, starting and stopping the engine of a car with its volume raised to the maximum level may harm your hearing. Be careful about adjusting the volume. Turning ON the Power and Adjusting the Volume 1) Press the POWER button [3]. * To turn off the power, press the POWER button E for 1 second or longer. 2) Press the FNC button [|] and select another operation mode. Every time the FNC button [3] is pressed, the display changes the operation mode as: Radio -» CD -* Radio Notes: • The operation mode not connected to the unit will not be selected. • If the CD mode is selected when no disc is inserted, the display flashes “DISC". 3) Turning the Rotary knob 04] clockwise increases the volume; turning it counterclockwise decreases the volume. * The volume level is from 0 (minimum) to 33 (maximum). Audio Mode Adjustments Press the A-M button [2] to select the adjustment mode. The mode switches as follows each time the A-M button is pressed: BASS -» TREB ■* BAL •+ FAD ■* Previous mode Adjusting the Treble ...

Эта инструкция также подходит к моделям:
CD-проигрыватели - DRB3657 (547.38 kb)
CD-проигрыватели - DRB365D (547.38 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории