Войти:
Оценок - 3, средний балл: 4 ( )

Инструкция по эксплуатации Aiwa, модель CX-NA30

Производитель: Aiwa
Размер: 11.01 mb
Название файла: NSXA35.pdf
Язык инструкции:enesfr
Перейти к скачиванию



Фрагмент инструкции


Insert each tape with the side to be played back or recorded 3 The tapes are rewound to the beginning of the front sides, and recording starts. To stop dubbing Press the n button, m Recording does not start, if the erasure prevention tab on either side of the tape is broken off, ENGLISH 1 ~! 6 Press the l REC/REC MUTE button to start Al EDIT RECORDING” recording on the first side. The tape is rewound to the beginning of the first side, the lead segment is played through for 10 seconds, and recording starts. When the last track programmed for side A is finished, deck 2 enters the recording stop mode. After entering the recording stop mode, go to step 7. 7 Press the EDIT/CHECK button while pressing the SHIFT button on the remote control to display the program for the second recording. B is displayed. 8 Turn over the tape in deck 2 and press the l REC/REC MUTE button to start recording on the second side. To stop recording The Al edit function enables CD recording without worrying about Press the n button. Recording and CD play stop simultaneously. tape length and track length. When a CD is inserted, the unit automatically calculates the total track length. If necessary, the To clear the edit program order of tracks is rearranged so that no track is cut short. Press the n CLEAR button twice so that’’EDlT disappears on (Al: Artificial Intelligence) To check the order of the programmed track numbers m Before recording, press the EDIT/CHECK while pressing the Al edit recording will not start from a pojnt halfway into the tape. SHIFT button on the remote control to select side A or B, and The tape must be recorded from the beginning of either side. press the ++ or -button repeatedly. Programmed 7 Insert the tape into deck 2. Track number track numbers Insert the tape with the side to be recorded on first facing out from the unit. 2 Press the CD button and.load the disc(s). ‘ 1’ 3 Press the EDIT/CHECK button once while I pressing the SHIFT button on the remote control. Program number C:EDIT and “Al” lights up on the display. To add tracks from other discs to the edit program If there is any time remaining on the tape after step 5, you can add tracks from other discs in the CD compartment 1 Press the EDIT/CHECK button while pressing the SHIFT button on the remote control to select side A or B. 2 Press one of the DISC DIRECT PLAY buttons to select a disc. Each time it is pressed, the display changes as follows. 3 Press the numbered buttons on the remote control to select tracks. “PRGM” appears on the display. Al EDIT -PRGM EDIT A track which has a playing time longer than the remaining time cannot be programmed. 4 Repeat steps 2 and 3 to add more tracks. 4 Press one of the DISC DIRECT PLAY buttons to select a disc. Time on cassette tapes and editing time 5 Press the numbered buttons on the remote The actual cassette recording time is usually a little longer than the specified recording time printed on the label. This unit can control to designate the tape length. program tracks to use the extra time. When the total recording 10 to 99 minutes can be specified. time is a little longer than the tape’s Specified recording time Example: When using a 60-minute tape, press the 6 and O after editing, the display shows the extra time (without a minus buttons. ., mark), instead of the time remaining on the tape (with the minus In a few seconds, the microcomputer programes the tracks mark). to be recorded on each side of the tape. . The -and ~ buttons are also available to designate the tape length. Tape side A Programmed Recording is inhibited if the erasure prevention tab on either Tape length (front side) tracks for side A side of the tape is broken off. The Al edit function cannot be used with discs containing 31 tracks or more. 1 Remaining time of side A ENGLISH PROGRAMMED EDIT RECORDING 3,7,8,9 5 4,5 3,7,8,9 u Programmed edit function enables CD recording while checking the remaining time on each side of the tape as the tracks are programmed. EEn3 The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the beginning of either side. 1 Insert the tape into deck 2. Insert the tape with the side to be recorded on first facing out from the unit. 2 Press the CD button and load the disc(s). 3 Press the EDIT/CHECK button twice while pressing the SHIFT button on the remote control. “EDIT and “PRGM” lights up on the display. 4 Press the numbered buttons on the remote control to designate the tape length. 10 to 99 minutes can be specified. Maximum recording Tape length time for side A Tape side A (front side) 5 Press the one of the DISC DIRECT PLAY buttons to select a disc. Then, press the numbered buttons and the + 10 button on the remote control to program a track. Example: To select the 10th track of disc 2, press the DISC DIRECT PLAY 2 button, then press the + 10 and O buttons. 6 Repeat step 5 for the rest of the tracks for side A,, A track whose playing time is longer than t...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории