Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
When recording on the front (side A) ends, recording on the back (side B) starts. To stop recording Press the W button. Recording and CD play stop simultaneously. To clear the edit program Press the n CLEAR button twice so that “EDIT” disappears on the display. To check the order of the programmed track numbers Before recording, press the EDIT/CHECK to select side A or B, and press the +4 or Eb button repeatedly. Program Programmed number track numbers Tape side Track number To add tracks from other discs to the edit program If there is any time remaining on the tape after step 5, you can add tracks from other discs in the CD compartment 1 Press the EDIT/CHECK button to select side A or B. 2 Press one of the DISC DIRECT PLAY buttons to select a disc. 3 Press the numeric buttons to select tracks. ~ goes out and m starts flashing on the display. A track which has a playing time longer than the remaining time cannot be programmed. 4 Repeat steps 2 and 3 to add more tracks. Time on cassette tapes and editing time The actual cassette recording time is usually a little longer than the specified recording time printed on the label. This unit can program tracks to use the extra time. When the total recording time is a little longer than the tape’s specified recording time after editing, the display shows the extra time (without a minus mark), instead of the time remaining on the tape (with the minus mark). . Recording is inhibited if the erasure prevention tab on either side of the tape is broken off. The Al edit function cannot be used with discs containing 31 tracks or more. Tape side A (front side) 15 ENGLISH PROGRAMMED EDIT RECORDING 3,7 5 4,5 5 2 8 8 ,E+ Programmed edit function enables CD recording while checking the remaining time on each side of the tape as the tracks are programmed. w The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded from the beginning of either side, Use the remote control from steps 3 to 8. 1 Insert the tape into deck 2, and press the DOLBY NR button to turn Dolby NR on or off. Insert the tape with the side to be recorded on first facing out from the unit, 2 Press the CD button and load the disc(s). 3 Press the EDIT/CHECK button twice. “EDIT lights up and “PRGM” flashes on the display, VT 4 Press the numeric buttons to designate the tape length. 10 to 99 minutes can be specified, Example: When using a 60-minute tape, press the 6 and O buttons. Maximum recording Tape length time for side A II Tape side A (front side) 5 Press one of the DISC DIRECT PLAY buttons to select a disc and press the numeric buttons to program a track. Example: To select the 10th track of disc 2, press DISC DIRECT PLAY 2 and the numeric buttons +10 and O. 6 Repeat step 5 for the rest of the tracks for side A. A track whose playing time is longer than the remaining time cannot be programmed, Remaining time of side A I Total number Programmed of prograrnmed tracks tracks 7 Press the EDIT/CHECK button to select side E and program the tracks for side B. After confirming B on the display, repeat step 5. Tape side B (reverse side) 8 Press the O\O REC/REC MUTE button and then press the + ~ button within 2 seconds to starlt recording. The tape is rewound to the beginning of i;he front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front side (A) ends, recording on the back side (B) starts. To stop recording Press the q button. Recording and CD play stop simultaneously. To check the order of the programmed track numbers Before recording, press the EDIT/CHECK button to select side A or B, and press the 44 or >P button repeatedly, Program number Track number Programmed track numbers To change the program of each side Press the EDIT/CHECK button to select side A or B, and press the q CLEAR button to clear the program of the selected side, Then program tracks again. To clear the edit program Press the q button twice so that “EDIT” disappears on the display, Recording is inhibited if the erasure prevention tab on either side of the tape is broken off. ENGLISH 16 MICROPHONE MIXING ——. ,.— .—, 2 VOCAL FADERI MULTIPLEX Two microphones (not supplied) can be connected to this unit, allowing you to sing along to music sources. Use microphones with mini plugs (03.5 mm, 1/8 inch). Before connecting a microphone Set the MIC MIXING control to MIN. 1 Connect your microphones to the MIC 1 and MIC 2 jacks. MIC1 MIC2 2 Press one of the function buttons to select the source to be mixed, and play the source. 3 Adjust the volume and tone of the source, 4 Adjust the microphone volume with the MIC MIXING control. The volume of both microphones is adjusted simultaneously. 5 Adjust the echo with the DIGITAL ECHO control. To record microphone sound mixed with source sound Follow the procedure for recording from the sound source (see page 13). The SYNC DUB button cannot be used for mixing recording. When not using the microphones Set the MIC MI...