Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
l 4, ~ or MULTI JOG are also available to designate the tape length, Programmed Remaining time tracks for side A of recording 6 Press l REC/REC MUTE to start recording on the first side. The tape is rewound to the beginning of the first side, the lead segment is played through for 10 seconds, and recording starts. When the last track programmed for side A is finished, deck 2 enters the recording stop mode. After entering the recording stop mode, go to step 7. 7 Press CD EDIT/CHECK while pressing SHIFT on the remote control to display the program for the second recording. “B” is displayed. 8 Turn over the tape in deck 2 and press l REC/ REC MUTE to start recording on the second side. To stop recording Press n . Recording and CD play stop simultaneously. To clear the edit program Press n CLEAR twice so that “EDIT” disappears on the display. To check the order of the programmed track numbers Before recording, press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A or B, and press < or > repeatedly. Programmed track numbers Track number Tape side Program number To add tracks from other discs to the edit program If there is any time remaining on the tape after step 5, you can add tracks from other discs in the CD compartment 1 Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A or B. 2 Press DISC DIRECT PLAY 1-3 to select a disc. 3 Press numbered buttons on the remote control to select tracks. A track whose playing time is longer than the remaining time cannot be programmed. 4 Repeat steps 2 and 3 to add more tracks. Time on cassette tapes and editing time The actual cassette recording time is usually a little longer than the specified recording time printed on the label. This unit can program tracks to use the extra time. When the total recording time is a little longer than the tape’s specified recording time after editing, the display shows the extra time (without a minus mark), instead of the time remaining on the tape (with the minus mark). The Al edit recording function cannot be used with discs containing 31 tracks or more. “TR OVER is displayed if this is attempted. Tape length Tape sir!e Minu~ mark A: First recording side B: Second recording side 14 ENGLISH In the programmed edit recording function the tracks can be programmed while checking the remaining time on each side of the tape, The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded on from the beginning of either side. 1 Insert the tape into deck 2, Insert the tape with the side to be recorded on first facing out from the unit. 2 Pr{?SsCD and load the disc(s). 3 Press CD EDIT/CHECK twice while pressing SHIFT on the remote control. “EDIT” and “PRGM” are displayed. When ‘[AI” is displayed, press CD EDIT/CHECK while pressing SHIFT again, 4 Press numbered buttons on the remote control to designate the tape length. 10 ‘to 99 minutes can be specified, . The +, -or MULTI JOG are also available to designate the tape length. Tape side A (front side) Tape length Maximum recording time for side A 5 Press DISC DIRECT PLAY 1-3 to select a disc. Then, press numbered buttons O-9 and + 10 on the remote control to program a track. Example: To select the 10th track of disc 2, press DISC DIRECT PLAY 2, then press +10 and O. Selected track number Programmed tracks 6 Repeat step 5 for the Irest of the tracks for side ~‘, A. ‘,,‘,!l !,, ,gfi A track whose playing time is longer than the remaining time ::m~fji cannot be programmed. $: & 7 Press CD EDIT/CHECK while pressing SHIFT on ‘$”~~ t the remote control to select side B and program . the tracks for side B. After confirming “B” on ‘the display, repeat step 5. Tape side B (reverse (side) 8 Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A and press 0 REC/REC MUTE to start recording. The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When the last track programmed for side A is finished, deck 2 enters the recording stop mode. After entering the recording stop mode, go to step 9. 9 Press CD EDIT/CHECl< while pressing SHIFT on the remote control for recording of the second side. “B” is displayed. 10 Turn over the tape in deck 2 and press @ REC/ REC MUTE to start recording, Recording starts, To stop recording Press n , Recording and CD play stop simultaneously. To check the order of the programmed track numbers Before recording, press CD EDIT/ICHECK while pressing SHIFT on thq remote control to select side A or B, and press 4 or * repeatedly. Programmed track numbers Track number Disc number Tape side Program number To change the program of each side Press CD EDIT/CHECK while pressing SHIFT on the remote control to select side A or B, and press n CLEAR to clear the program on the selected side. Then program tracks again. To clear the edit program Press W CLEAR twice so that “EDIT” disappears on the display m . Up...