Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
STOP/EJECT BUTTON 3. FAST FORWARD BUTTON 4. REWIND BUTTON 5. PLAY BUTTON 6. RECORD BUTTON 7. CASSETTE COMPARTMENT 8. BAND SWITCH 9. TUNING KNOB 10. FM STEREO INDICATOR 11. REPEAT BUTTON 12. CD FORWARD SKIP/SEARCH BUTTON 13. CD PLAY / PAUSE BUTTON 14. VOLUME CONTROL 15. RADIO DIAL SCALE 16. DIAL POINTER 17. PLAY/PAUSE INDICATOR 18. LED DISPLAY 19. REPEAT 1/ALL INDICATOR 20. PROGRAM INDICATOR 21. REMOTE SENSOR 22. CD STOP BUTTON 23. CD BACKWARD SKIP/SEARCH BUTTON 24. PROGRAM BUTTON 25. POWER INDICATOR 26. POWER SWITCH 27. FUNCTION SWITCH 28. HEADPHONE JACK 29. SPAEKER BOX 30. CD OPEN/CLOSE CONTROL DOOR 31. HANDLE 32. ROD ANTENNA 33. BATTERY COMPARTMENT 34. AC POWER CORD 35. AC/DC VOLTAGE SELECTOR 36. SPEAKER JACK (RIGHT) 37. SPEAKER JACK (LEFT) 38. 110V/220V AC VOLTAGE SELECTOR GENERAL OPERATION POWER SOURCES Before connecting the Unit to an AC outlet, check that the operating voltage of the Unit is identical with the voltage of your local power supply. Connect the supplied AC power cord to the AC in jack. BATTERY OPERATION Switch the AC/DC selector to DC position. Open the Battery Compartment Door and insert 8 UM-1 D size batteries, making sure that the indicated battery polarity is observed. Note: The AC cord must be completely disconnected if no AC/DC selector switch. RADIO OPERATION Slide the Function Switch to the RADIO position. Slide the Band Switch, as you prefer. Turn the tuning knob to your desired radio station. Adjust the Volume Controls. SPEAKER PLACEMENT This unit features a detachable speaker system. The left and right speaker enclosures can be detached from the main unit, and placed where desired. When the speakers enclosure are attached to the main unit, the unit can be carried to any location desired. TO ATTACH THE SPEAKER ENCLOSURES 1. Attach the speaker enclosure to the main unit about halfway up, and slide the speaker enclosure to the locked position. 2. Extend the speaker wire to the desired length. 3. Insert the speaker wire plug into the SPEAKER JACK. TO DETACH THE SPEAKER ENCLOSURE 1. Remove the speaker wire plug from the SPEAKER JACK. 2. Push the RELEASE lever as illustrated and lift the speaker enclosure. 3. Wind the excess speaker wire onto the post, on the back of each speaker enclosure. FM STEREO INDICATOR Slide Band Switch to FM position, The FM Stereo indicator is on if stereo broadcasts are received. ANTENNAS Fully extend the Telescope Antenna to receive FM and SW (Option) stations. For AM reception the unit has a built-in antenna. Turn the whole unit for best reception. STEREO HEADPHONE JACK For private listening, insert the plug of a Stereo Headphone into the Stereo Headphone JACK and adjust Volume Control Knobs, accordingly. During the use of headphone, the External Speakers are automatically disconnected. CASSETTE OPERATION Tape A playback only. Depress the Stop/Eject Button to open the cassette door, insert a cassette into the door and push the cassette door to close. Slide the Function Switch to the TAPE position. Depress the Play Button, Adjust the Volume Control Knobs, to the listening level. To stop the tape, depress the Stop/Eject button. Tape B playback Depress the Stop/Eject Button to open the cassette door, Insert a cassette into the door and push the cassette door to close. Slide the Function Switch to the TAPE position. Depress the Play Button. Adjust the Volume Control Knobs to the listening level. To stop the tape, depress the Stop/Eject Button. Fast Forward and Rewind The tape be fast advanced or rewind by depressing the Fast Forward button or Rewind Button respectively. Pause Function During playback or recording, the tape can be stopped temporarily by depressing the pause Button. To release this button, press it again. Auto Stop System When the tape runs to the end during playback or recording, the play button will release itself automatically, stopping the tape at the same time. RECORDING A. RECORDING FROM THE BUILT-IN RADIO 1. Tune into the desired station. 2. Load a cassette into the TAPE b cassette compartment 3. Press the PAUSE button of TAPE B 4. Press the RECORD button of TAPE B, which also engages the PLAY button. 5. Press the PAUSE button again to begin recording. B. DUBBING Tape A Tape B Insert the tape to be copied into the Tape A Cassette Door. Insert the blank tape into the Tape B Cassette Door. Slide the Function switch to the Tape or Dubbing position. For ‘NORMAL’ or ‘HIGH’ speed dubbing. Depress Play Button of Tape A and both Record Button of Tape B at the same time. Signals from Tape A will be recorder/dubbed on to Tape B. CD PLAYBACK 1. Slide the FUNCTION switch to CD position. 2. Press the CD Open/Close button to open the CD compartment. 3. Place a CD on the spindle, label side up. 4. Close the CD compartment. The total number of tracks will be displayed. If the compartment is not close or there is no disc, “- -” sign will be displayed. 5. Press the PLAY/PAUSE button to start playback from the first track and the track number displayed du...