Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
USB connection allows you to hear digitally encoded audio sources, such as music CDs or Wave files, as they are intended to be heard. You will hear clearer, brighter digital audio playback when it is playing through the speaker system over USB. System Requirements The DSS330 is a speaker system using the Universal Serial Bus for Digital Audio streaming and control. System requirements are: 1 PC Audio Card (Analog) Support Connect a 3.5mm plug cord to the AUDIO IN jack of the subwoofer and to your soundcard. Note:If you are only using the AUDIOIN jack, adjust the volume using your soundcard/source control. 2 Using USB Digital Audio Streaming with Windows 98 • A PC with a Pentium 166 MHz processor or higher • An active USB port • A double-speed or faster CD ROM drive, or DVD ROM • Philips Speaker Controls (see supplied CD ROM) • 16MB of RAM • 16 MB of free hard disk space • A UL listed or TUV approved PC 8 Philips Speaker Control Software If you are installing your Philips USB-speakers on a Windows 98 PC with a USB port, you do not need a sound card. Philips has provided the speakers with a set of digital speaker control software. The speaker control consists of an applet which enables you to control on screen the volume, treble, bass and balance settings of the speaker system. Part of the speaker control is a device managing software called PlugWorks (more information about this software can be found in the PlugWorks Quick Reference Guide). Hardware Controls/Connections On the remote control: 1POWER switches the speakers on and to standby 2INCREDIBLE SURROUND creates a 3D surround sound effect 3 VOLUME . -- / + ++ adjusts the volume level (only works when USB is connected) On the Subwoofer: 4SUBWOOFER LEVEL CONTROL adjusts the bass level of the subwoofer 5LEFT SAT connects to the left speaker 6RIGHT SAT connects to the right speaker 7 AUDIO IN Connects the soundcard of your computer when not using Windows 98 and USB. Can also be used to connect analog volume controlled appliances (e. g. CD player). 8REMOTE connects to the remote control box 9USB connects to a USB port 0 AC MAINS after all other connections have been made, connect the AC power cord to the system and to the wall outlet. INST ALLA TION DSS330/17 26/4/99 10:52 am Page 9 The mains socket-outlet shall be installed Analog Audio Playback near the equipment and shall be easily You must connect the audio in of the subwoofer accessible. with the sound card/analog device. Installing the Speaker System English 1 Before connecting the speakers, insert the supplied CD-ROM into the CD-ROM drive. If AUTOPLAY is not enabled on the CD-ROM: 2 Select the icon “MY COMPUTER” and double click. 3 Select the icon for your CD-ROM drive and double click. 4 Run “WELCOME.EXE” and proceed to step 5 . If AUTOPLAY is enabled on the CD-ROM: 5 Push the installed “PLUG WORKS” software suite. 6 Follow the on-screen instructions. 7 Reboot the system as requested. Setting up the speakers 8 Connect the satellite speaker...
Эта инструкция также подходит к моделям:CD/DVD приводы - DSS330/10 (217.3 kb)
CD/DVD приводы - DSS330/05 (217.3 kb)