Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
1. Stop the application software being currently used. 2. Click the icon “ ” of the taskbar located on your screen’s bottom right side. 3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”. 4. Click “Ok” and then remove the USB converter cable. 1 2 3 4 This following is the general figure of the design of the drive. The drive’s appearance and specifications may change without prior notice. Front Rear 1 NOTE Don’t remove the USB 2.0 cable when the busy indicator on the drive blinks, or during computer startup. The removing procedure varies depending on your OS. Features • Universal Serial Bus (USB) 2.0 interface for high-speed data transfer. • Buffer Under Run error protection technology • Emergency eject support • Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL, DVD-R DL and DVD-RAM drive functions into one drive. • Supports region playback control Phase II. • PC USB powered, no AC adapter needed. • Supports LightScribe Direct Label Printing Technology - *Optional. System meeting the following requirements is needed in order to use USB 2.0 operation with this drive. • Computer that is equipped with a USB 2.0 – compliant USB connector or PCI adapter card, and on which the USB 2.0 EHCI (Enhanced Host Controller Interface) driver software 1) has been installed. 1) The USB 2.0 EHCI driver software is supplied with currently available PCI adapter cards that conform to USB 2.0. Further, Microsoft has released the USB 2.0 EHCI driver software for Windows XP, therefore it is also possible to use this driver software with Windows XP SP2. If you want to know in detail, please contact your USB 2.0 adapter dealer or consult your PC manufacturer, or consult the Microsoft Corporation Web site. System Environment Computer This unit can be operated in the system environment explained here. * For Windows 7/ Windows Vista, 1 GB of RAM or large is recommended. * Compatibility problem in write/read function may occur with some media depending on the media manufacturing quality. * To achieve maximum Record & Write speed your system may require data to be copied first to the computer’s hard drive rather than directly from another source disc or drive. Pentium IV 2.4 GHz or Higher(with USB 2.0) for basic performance (Recommended for optimal performance: Pentium IV 3.2 GHz or Higher). 256 MB or larger (Recommended: 512 MB). 20 GB or more free space. (The free space needed for writing depends on the quantity of data.) 64 MB (Recommended: 128 MB). USB 2.0 port For Software installation Windows 7/Windows Vista (32 bit, 64 bit)/Windows XP SP2, Mac OS X v.10.5.4 or Higher, Direct X 9.0 or Higher CD-R : LG, Mitsubishi Kagaku Media, Verbatim, That’s, TDK, Ritek or HP discs are recommended. CD-RW : LG, Mitsubishi Kagaku Media, Verbatim are recommended. DVD-R : Mitsubishi Kagaku Media, Maxell, That’s are recommended. DVD-RW : Victor. JVC, Mitsubishi Kagaku Media, TDK are recommended. DVD+R : Mitsubishi Kagaku Media, That’s, Maxell are recommended. DVD+RW : TDK, Mitsubishi Kagaku Media, Ricoh are recommended. DVD-RAM : Maxell, Mitsubishi Kagaku Media are recommended. DVD±R DL : Mitsubishi Kagaku Media, Verbatim are recommended. System requirements Hard disk Video Memory Interface CD-ROM drive Software Required OS CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD±R DL discs CPU Memory Item Quantity - Portable Super Multi Drive 1 - USB 2.0 cable (Y type) 1 - Software Installation disc 1 - Quick Guide for Drive 1 Quick Set-up Guide Portable Super Multi Drive GP40 To install of your product, please read this guide manual carefully and completely. Package Items Cautions GP40Lx10 GP40Nx10 Light Scribe Supported Not Supported Features • Universal Serial Bus (USB) 2.0 interface for high-speed data transfer. • Buffer Under Run error protection technology • Emergency eject support • Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL, DVD-R DL and DVD-RAM drive functions into one drive. • Supports region playback control Phase II. • PC USB powered, no AC adapter needed. • Supports LightScribe Direct Label Printing Technology - *Optional. System meeting the following requirements is needed in order to use USB 2.0 operation with this drive. • Computer that is equipped with a USB 2.0 – compliant USB connector or PCI adapter card, and on which the USB 2.0 EHCI (Enhanced Host Controller Interface) driver software 1) has been installed. 1) The USB 2.0 EHCI driver software is supplied with currently available PCI adapter cards that conform to USB 2.0. Further, Microsoft has released the USB 2.0 EHCI driver software for Windows XP, therefore it is also possible to use this driver software with Windows XP SP2. If you want to know in detail, please contact your USB 2.0 adapter dealer or consult your PC manufacturer, or consult the Microsoft Corporation Web site. System Environment Computer This unit can be operated in the system environment explained here. * For Windows 7/ Windows Vista, 1 GB of RAM or large is recommended. * Compatibility pr...
Эта инструкция также подходит к моделям:CD/DVD приводы - GP40NR10 (116.59 kb)
CD/DVD приводы - GP40NW10 (116.59 kb)