Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Push the power button and boot the computer. After booting the computer, open the disc compartment by pressing the Eject button. Insert the disc (CD/DVD) with the label on the disc facing upwards and close the disc compartment by pressing the Eject button. The indicator light comes on. Play the disc (CD/DVD). Accessories .. The type of accessories varies depending on product model. Application software & User Four screws to install the Setup guide manual CD drive Playing Video CDs Set up and run the SOFT MPEG program. Design and specifications are subject to change without prior notice. Select Languages Select Model English SH-D163B(TS-H353B) Storing and Cleaning Your Discs To ensure a long service life for your discs and drive, follow the pre-cautions below when storing and cleaning your discs. Do not place a disc in direct sunlight. Store a disc vertically in a well-ventilated and stable location. Do not write or attach a label on a disc. Do not drop a disc or place heavy objects on it. Do not touch the surface of a disc; hold it by the edges. To clean a disc, polish lightly from the inside of the disc to the outside with a soft cotton cloth. Do not leave the disc compartment open when you are not using it. Select Languages Select Model English SH-D163B(TS-H353B) Upgrading the Firmware Flash Memory The product firmware can be upgraded by downloading the updated file from the following Web site: Select Languages Select Model English SH-D163B(TS-H353B) System Requirements Before you install the DVD-ROM drive, we strongly recommend that you check that your setup meets the system requirements listed below. Item Description OS Microsoft Windows 2000/XP/ Vista CPU S-ATA supported PC (The compatible motherboard list can be found from the website) RAM 256Mbytes or above DVD Region Protection Coding (RPC): The RPC feature is supported on DVD players and is used with DVD-video discs (such as movies). Currently, the motionpicture industry has divided the worldinto different regions or zones thatcorrespond to the regional markets intowhich the motion picture industry releasesmovies. Simply put, RPC codes are placedon movies marketed throughout the world,based on the region of the world inwhich they are being sold. These RPCcodes help control and prevent piratingof new movies into other motion pictureregions prior to their true releasedates within those markets. The DVD-ROM drive supports RPCphase II. In the RPC-2 mode, the localcode can be changed by users. RPC-2is selected by default for the DVD-ROM drive. You can change the region code up tofive times via an MPEG application. Please contact your dealer or local SAMSUNG representative if you wish tochange the local code more than fivetimes. Select Languages Select Model English SH-D163B(TS-H353B) Problem Meaning / Solution The DVD-ROM drive is not detected by the computer. After installing the DVD-ROMdrive, the PC gets slower. Check that the power and S-ATA cables are correctly connected to the computer. Change the S-ATA cable and reconnect it to the computer. Preferably, connect a second S-ATA cable to the DVD-ROM drive. The DVD-ROM drive is not recognized by MS-DOS. Reinstall the device driver or update it with the latest version by downloading it from the Samsung Web site. -Http://samsung-ODD.com -Http://samsung.com The DVD-ROM drive is not detected by Windows. This case may occur when there is a Windows installation problem; reinstall Windows. No sound is heard from an audio CD. Check that the sound card is operational. Adjust the volume control of windows. A CD is not read or is read too slowly. Check whether the CD is of good quality and clean it, if necessary. The disc compartment will not open. Check that the power cable is correctly connected. Power off and disconnect the PC. Insert a pin or unfolded paper clip in the emergency hole and push firmly until the disc compartment opens. When the MPEG software plays a Video CD, the picturesare not regular and the running speed is too slow. Adjust the size of the replay screen. After checking the display resolution, adjust it, if necessary. The Disc is not in message isdisplayed even though a dischas been inserted. The computer may not recognize the disc if you start playback too quickly after inserting the disc. Open and close the disc compartment and try again. Clean the disc and try again. The DVD-ROM drive is not detected after it is connected to a sound card. The interface mode of the sound card is AT-BUS. You must therefore connect the DVD-ROM drive to the S-ATA port on the PC mother board, rather than to the sound card, or install an S-ATA compatible sound card. Select Languages Select Model English SH-D163B(TS-H353B) SAMSUNG continually strives to improve its products. Both the design specifications and these user instructions are thus subject to change without notice. Technical Specifications ITEM Model Name SH-D163B(TS-H353B) ITEM DVD | CD Disc Disc types supporte...
Эта инструкция также подходит к моделям:CD/DVD приводы - SH-D163C (340.87 kb)