Оценок - 1, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
5 Expand the CD-ROM branch. The SAMSUNG DVD-ROM SD - *** device name is displayed. The SAMSUNG device driver enables discs in the DVD-ROM drive to be read but not recorded in an MS-DOS environment; the driver is located in the D driver folder on the CD record utility disc. DVD Region Protection Coding (RPC): The RPC feature is supported on DVD players and is used with DVD-video discs (such as movies). Currently, the motion picture industry has divided the world into different regions or zones that correspond to the regional markets into which the motion picture industry releases movies. Simply put, RPC codes are placed on movies marketed throughout the world, based on the region of the world in which they are being sold. These RPC codes help control and prevent pirating of new movies into other motion picture regions prior to their true release dates within those markets. The SD-816 DVD-ROM drive supports RPC phase II. In the RPC-2 mode, the local code can be changed by users. RPC-2 is selected by default for the SD-816 DVD-ROM drive. You can change the region code up to five times via an MPEG application. Please contact your dealer or local SAMSUNG representative if you wish to change the local code more than five times. To play audio or video CDs in your DVD-ROM drive, proceed as follows. 1 Push the power button and boot the computer. 2 After booting the computer, open the disc compartment by pressing the Eject button. 3 Insert the disc (CD/DVD) with the label on the disc facing upwards and close the disc compartment by pressing the Eject button. The indicator light comes on. 4 Play the disc (CD/DVD). 1 Do not place a disc in direct sunlight. 2 Store a disc vertically in a well-ventilated and stable location. 3 Do not write or attach a label on a disc. 4 Do not drop a disc or place heavy objects on it. 5 Do not touch the surface of a disc; hold it by the edges. 6 To clean a disc, polish lightly from the inside of the disc to the outside with a soft cotton cloth. 7 Do not leave the disc compartment open when you are not using it. Playing Audio CDs Run the CD player supplied with Windows or your sound card. You can listen to the CD by connecting headphones to the appropriate connector. If you have installed the appropriate player, such as Microsoft Windows Media Player, you can adjust the volume using the headphone volume control on the drive front panel. Playing Video CDs Set up and run the SOFT MPEG program. To ensure a long service life for your discs and drive, follow the precautions below when storing and cleaning your discs. Problem Meaning / Solution The DVD-ROM drive is not detected by the computer. Check that the power, audio and IDE cables are correctly connected to the computer. Change the IDE cable and reconnect it to the computer. Preferably, connect a second IDE cable to the DVD-ROM drive in master mode. Check the position of the jumper in the master/slave select terminal. Reinstall the device driver or update it with the latest version by downloading it from the Samsung Web site. - - This case may occur when there is a Windows installation problem; reinstall Windows. Check whether the audio cable is correctly connected to the sound output terminal on the DVD-ROM drive and the sound card CD-IN terminal. Check that the sound card is operational. Adjust the volume control. Install the latest version of the device driver. Check whether the CD is of good quality and clean it, if necessary. Check that the power cable is correctly connected. Power off and disconnect the PC. Insert a pin or unfolded paper clip in the emergency hole and push firmly until the disc compartment opens. Adjust the size of the replay screen. After checking the display resolution, adjust it, if necessary. The computer may not recognize the disc if you start playback too quickly after inserting the disc. Open and close the disc compartment and try again. Clean the disc and try again. The interface mode of the sound card is AT-BUS. You must therefore connect the DVD-ROM drive to the IDE port on the PC mother board, rather than to the sound card, or install an IDE-compatible sound card. After installing the DVD-ROM drive, the PC gets slower. The DVD-ROM drive is not recognized by MS-DOS. The DVD-ROM drive is not detected by Windows. No sound is heard from an audio CD. A CD is not read or is read too slowly. The disc compartment will not open. When the MPEG software plays a Video CD, the pictures are not regular and the running speed is too slow. The Disc is not in message is displayed even though a disc has been inserted. The DVD-ROM drive is not detected after it is connected to a sound card. Sustained : Max. 21,600KB/sec (16X) / Max. 7,200KB/sec (48X) DISC ERROR RATE REAR PANEL FRONT PANEL OPERATING ENVIRONMENT GENERAL RELIABILITY DRIVE PERFORMANCE Disc diameter Disc types supported Data transfer rate Access time(Random) Data buffer capacity Laser Slide mecha...