Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
MS-DOS® and Windows® arc registered trademarks of Microsoft Corporation in the United States and/or other countries. Usage Precautions • Do noi place items other than discs on the tray. • Do not leave the tray in the open position or touch the lens area. Should the lens become soiled by dust or dirt, the unit may not read discs properly. • Under some conditions, dust may build up on the optical lens or disc, possibly resulting in malfunction. • Do not apply excessive force to the tray in the open position, doing so could damage the tray. • Do not open the DVD-ROM drive or move the computer while the DVD-ROM drive is being accessed. Doing so could cause it to malfunction. In addition, after running an application involving access to a disc, do not open the DVD-ROM drive or remove the disc until after the application has been closed. • After closing the tray, do not attempt to access a disc until the DVD-ROM drive indicator (|MP|) disappears. • Do not expose the DVD-ROM Drive Pack to oily or tobacco smoke. Doing so could shorten the service life of the lens. • Cleaning the DVD-ROM drive using a CD lens cleaner (except a liquid type cleaner) is recommended if it malfunctions, • Never insert foreign objects such as paper clips into the slot in the DVD-ROM Drive Pack. • Do not use discs that have become deformed (warped, not completely round, etc.). To avoid damaging discs: • Do not touch the surface as it can cause the disc to become dirty or scratched. • Do not allow' discs to become dirty or scratched. • Do not place or store discs in locations exposed to heat, direct sunlight, humidity or dust. • Do not write on the surface of the disc with a ball-point pen or other writing instrument. • If the disc is brought from a cold into a warm environment, moisture may form on the disc. Wipe this moisture off with a soft. dry. lint-free cloth before using the disc. • Do not drop. bend, or place heavy objects on top of discs. • Cleaning the disc using a CD cleaner (LF-K022DC) is recommended once every 2 or 3 months. O X After wiping the disc with a moist, soft cloth, wipe it with a dry cloth. Always wipe from the center toward the edge. Mounting the DVD-ROM Drive Pack 1 Power off your computer Do not shut down using ihe suspend or hibernation mode. 2 • Removing the device (Floppy disk drive) Mp release button (T) Press the MP release button. The device will eject slightly. (2) Remove the device by holding both sides of the devicc. i Please handle the device as shown (holding both sides). Otherwise, the device may be damaged. Also, do not apply excessive downward force on the device. The projections at the bottom of a device become deformed. » Be sure the shape of the lock at the bottom of a device does not bccomc deformed. Do not insert a device that has become deformed into the multimedia pocket. The device may become impossible to remove later. • Installing the device (DVD-ROM Drive Pack) Gently insert the device into the multimedia pocket by pushing on both comers until it clicks into place. (^¿0DSC9) Do not install the device upside-down. The bottom of the drive may become disfigured. Label side up г(ЕШ> You may use the floppy disk drive as an external device connected through the parallel port, using an optional FDD cable (CF-VCF351). 4_ Mounting the DVD-ROM Drive Pack 3 Power on the computer, open the disc tray, and place a disc on it (T) Press the eject button and slowly pull out the iray. (2) Place the disc with the label facing up in the drive and push down until the center holder clicks. (3)Close the tray without touching the eject button. Label side up Eject button Center holder • Do not apply excessive force to the tray in the open position, doing so could damage the tray. •