Оценок - 4, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
2 Set “Audio Output Priority” to “Coaxial/Optical” in the “Audio *2 Settings” setup (page 44). 3 Make the appropriate settings in “Dolby Digital” and “DTS” under the “Audio Settings” setup (page 45). Otherwise, no sound or a loud noise will come from your speakers. Hookups and Settings ,continued Connecting to audio L/R jacks If your AV amplifier (receiver) only has L and R audio input jacks, use this connection. Blu-ray Disc/DVD player (red) (white) Audio/video cable (supplied) (red) (white) Match the color of the plug to that of the jack. AV amplifier (receiver) : Signal flow Step 3: Inserting the External Memory To enjoy additional content (such as BonusView) on certain Blu-ray Disc titles, you will need to use external memory. Insert the external memory device (1 GB or larger USB flash memory, such as Sony USM1GH) into the EXT slot as your local storage. Insert the external memory in the V direction into the EXT slot as far as it will go. Check that the EXT indicator lights up in the front panel display when turning the player on. With the terminal side up Rear of the player Sony USM1GH (not supplied) To enjoy BonusView See “Enjoying BonusView” (page 32). To remove the external memory 1 Press [/1 to turn the player off. 2 Pull out the external memory from the EXT slot. b • Do not connect anything other than a USB flash memory, such as an HDD, etc., to the EXT slot. • Insert the external memory straight. If you force the external memory into the slot, this will cause damage to both the external memory and the player. • Keep the external memory away from small children to prevent them from accidentally swallowing the external memory. • Do not apply too much pressure to the external memory in the slot, as it may cause a malfunction. • We recommend use of the Sony USM1GH available as of April 2008. • Other USB flash devices may support this function. However we cannot guarantee compatibility with all USB flash memories. • When inserting a USB flash memory other than Sony USM1GH, check the insertion direction before inserting it. • Depending on the USB flash memory, it may stick out from the EXT slot. Do not force into the slot or apply pressure to the protruding portion of the USB flash memory. • To avoid data corruption or damage to the external memory, turn the player off when inserting or removing the external memory. • When the EXT indicator does not light up, turn the player off, remove and re-insert the external memory, then turn the player on again. • Do not insert the external memory that contains photo or music files to avoid corrupting the external memory data. Hookups and Settings Step 4: Connecting to the Network Connect the LAN (100) terminal of the player to your Internet source using a network cable to update the player’s software using the network. 1 Connect the LAN (100) terminal of the player to your Internet source. Methods to connect to your Internet source include: • Connecting to a broadband router directly • Connecting via a wireless LAN router Refer also to the instructions supplied with the broadband router or the wireless LAN router. 2 Make the appropriate settings in “Internet Settings” under the “Network Settings” setup (page 50). To update the player’s software using the network See “Network Update” (page 40) and “Software Update Notification” (page 49). b Do not connect a phone line to the LAN (100) terminal, as it may cause a malfunction. When connecting to a broadband router directly Blu-ray Disc/DVD player Network cable (not supplied) Broadband router To PC Network cable (not supplied) ADSL modem/ Cable modem Internet About network (LAN) cables Depending on the modem or router, the type of network (LAN) cable, straight or crossing, differs. For details on the network (LAN) cables, refer to the operating instructions supplied with the modem or router. When connecting via a wireless LAN router Blu-ray Disc/DVD player Network cable (not supplied) Ethernet/wireless LAN media converter To PC Wireless LAN router (access point) Network cable (not supplied) ADSL modem/ Cable modem Internet b Do not connect the LAN terminal of the player to the LAN terminal of the PC. Step 5: Connecting the AC Power Cord After all of the other connections are complete, connect the supplied AC power cord to the AC IN terminal of the player. Then plug the player and TV power cords into the AC outlet. to AC IN 1 2 to AC outlet Hookups and Settings Step 6: Preparing the Remote You can control the player using the supplied remote. Insert two Size AA (R6) batteries by matching the 3 and # ends on the batteries to the markings inside the battery compartment. When using the remote, point it at the remote sensor on the player (page 10). b • Use the batteries correctly to avoid possible leakage and corrosion. Should leakage occur, do not touch the liquid with bare hands. Observe the following: – Do not use a new battery with an old battery, or batteries of different manufacturers. – Do not attempt to recharge ...