Оценок - 1, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
SYSTEM CABLE HDMI OUT HDMI IN 1 HDMI IN 2 SPEAKERS OUT AUX IN FRONT FRONT ONLY FOR DIGITAL UPDATE AUDIO IN (OPTICAL) FM ANT SPEAKER IMPEDANCE : 3 2. Make a loop once in the power cable of the subwoofer. 3. Attach the Toroidal ferrite core to the Subwoofer power cord as the figure shows and press it until it clicks. Attaching the Toroidal Ferrite Core to the System Cable 1. Pull the fixing tab of the Toroidal ferrite core to open it. 2. Insert two cores into one end of the system cable, and the other core into the other end of the system cable (connected between product and subwoofer). Then, press to close the cores until you hear a click as shown. -Unlike attaching ferrite core to the power cable, do not make loops around the core with the system cable and simply plug in the core and fix it. SYSTEM CABLE FM ANT AUX IN DIGITAL AUDIO IN (OPTICAL) ONLY FOR UPDATE HDMI OUT HDMI IN 1 HDMI IN 2 SPEAKERS OUT FRONTFRONTSPEAKER IMPEDANCE : 3 SYSTEM CABLE 20 English HT-D7200_ELS_1227.indd 20 2011-12-27 3:27:56 Attaching the Toroidal Ferrite Core to the Speaker Cables of the Subwoofer If you attach a Toroidal ferrite core to the Speaker Cables of the subwoofer, it will help to prevent RF interference from radio signals. 1. Pull the fixing tab of the Toroidal ferrite core to open it. 2. Make a loop once in the Speaker Cables. 3. Attach the Toroidal ferrite core to the Speaker Cables of the Subwoofer as the figure shows and press it until it clicks. • Make another ferrite core beside the first one that followed same steps 1 through 3. • Insert the ferrite core as close to the subwoofer as possible. Speaker Components ConnectionsSYSTEM CABLE FM ANT AUX IN DIGITAL AUDIO IN (OPTICAL) ONLY FOR UPDATE HDMI OUT HDMI IN 1 HDMI IN 2 SPEAKERS OUT FRONTFRONTSPEAKER IMPEDANCE : 3 SWPosition of the product Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TV's 2~2.4m For 55" TV's 3.5~4m SPEAKER CABLEFRONT SUBWOOFER (L) (R) Front Speakers eiPlace these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the speakers so that their tweeters will be at the same height as your ear. Subwoofer gThe position of the subwoofer is not so critical. Place it anywhere you like. ! CAUTION . Do not let children play with or near the speakers. They could get hurt if a speaker falls. . When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct. . Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker. . Do not hang the subwoofer on the wall through the duct (hole). . NOTE . If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field generated by the speaker. If this occurs, place the speaker away from your TV set. English 21 HT-D7200_ELS_1227.indd 21 2011-12-27 3:27:58 Connections Connecting The Speakers 1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal (–) and the red wire into the red terminal (+), and then release the tab. 3. Connect the connecting plugs to the back of the product by matching the colours of the speaker plugs to the speaker jacks. Black Red SYSTEM CABLE FM ANT AUX IN DIGITAL AUDIO IN (OPTICAL) ONLY FOR UPDATE HDMI OUT HDMI IN 1 HDMI IN 2 SPEAKERS OUT FRONTFRONTSPEAKERS OUT FRONTFRONTSYSTEM CABLE SPEAKER IMPEDANCE : 3 Front Speaker (R) Subwoofer Front Speaker (L) Connecting the FM Antenna FM Antenna (supplied) SYSTEM CABLE FM ANT AUX IN DIGITAL AUDIO IN (OPTICAL) ONLY FOR UPDATE HDMI OUT HDMI IN 1 HDMI IN 2 SPEAKERS OUT FRONTFRONTFM ANT SPEAKER IMPEDANCE : 3 1. Connect the FM antenna supplied to the FM ANTENNA Jack. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. .NOTE . This product does not receive AM broadcasts. 22 English HT-D7200_ELS_1227.indd 22 2011-12-27 3:28:00 Connecting External Devices/your TV via HDMI Connecting External Devices/your TV via HDMI HDMI is the standard digital interface for connecting to devices such as a TV, projector, DVD player, Blu-ray player, set top box, and more. Because HDMI is all digital, you'll enjoy digital quality video and sound as it was originally created, without the distortions that can be caused when digital content is converted to analogue. SAT (Satellite/Set top box) DVD or Blu-ray Player 02 Connections SYSTEM CABLE FM ANT AUX IN DIGITAL AUDIO IN (OPTICAL) ONLY FOR UPDATE HDMI OUT HDMI IN 1 HDMI IN 2 SPEAKERS OUT FRONTFRONTHDMI OUT HDMI IN 1 HDMI IN 2SYSTEM CABLE FM ANT AUX IN DIGITAL AUDIO IN (OPTICAL) ONLY FOR UPDATE SPEAKERS OUT IMPEDANCE SPEAKER IMPEDANCE : 3 HDMI OUT HDMI IN HDMI IN HDMI OUT : Connecting to a TV with an HDMI...
Эта инструкция также подходит к моделям:Blu-Ray проигрыватели - HT-D7200B (4.12 mb)