Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• Clock Set : You can specify the current time and date manually. • Time Zone : You can specify the time zone that is applicable to your area. • DST : You can set DST (Daylight Saving Time) 1 hour, 2 hours and off. DivX(R) Registration View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content. Settings Display Initial Settings Audio Disc Menu System DivX(R) Video On Demand Network Your registration code is : XXXXXXXXXX Language To learn more visit Security OKGeneral Support . NOTE . This option is not activated if you select OK. To activate this option, please activate the DivX(R) Deactivation. DivX(R) Deactivation Select this to get a new registration code. Settings Display Initial Settings Audio Disc Menu : System Network Do you want to deactivate your device? Language Security Yes No General Support .NOTE . This function can be operated when DivX(R) Registration function is deactivated. English 35 Setup Network To begin setting up the network connection for your product, follow these steps: 1. In the Home menu, press the <> buttons to select the Settings, and then press the ENTER button. 2. Press the ^Ў buttons to select Network, and then press the ENTER button. 3. Press the ^Ў buttons to select Network Settings, and then press the ENTER button. 4. Press the ^Ў buttons to select Network Type, and then press the ENTER button. 5. Press the ^Ў buttons to select Wired or Wireless, and then press the ENTER button. 6. Go to the next section. Network Settings Please contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, we recommend using the Auto setting. This is the easiest and will work in the majority of cases. If it is static, you must use the manual set up procedure. Directions for wired networks are below. Directions for wireless networks are after the directions for wired networks. Wired Network 1. In the Network Settings menu, press the ^Ў buttons to select Network Setting, and then press the ENTER button. The Internet Protocol Setup screen appears. 2. Press the > button, then select Auto or Manual, and then press the ENTER button. Setting Up a Wired Connecton - Auto 1. If you selected Auto, the Network Function acquires and fills in the values for IP Address, Subnet Mask, etc., automatically. .NOTE . This process can take up to five minutes. Network Setting Internet Protocol Setup : Auto . IP Address : 0 0 0 0 Subnet Mask : 0 0 0 0 Gateway : 0 0 DNS : Auto 0 0 DNS Server : 0 0 > Move "Enter 0 0 'Return 2. After the Network Function has acquired thenetwork values, press the RETURN button. Then, run a Network Test to ensure the product has connected to your network (Seepage 39). 3. If the Network Function does not acquire thenetwork values or you selected Manual, go tothe directions for Manual Setup. Setting Up a Wired Connecton - Manual If the Auto Setting does not work, you’ll need to set the Network Setting values manually. To get the Network setting values from most Windows computers, follow these steps: 1. Right click the Network icon on the bottomright of the screen. 2. In the pop-up menu, click Status. 3. On the dialog that appears, click the Supporttab. 4. On the Support tab, click the Details button. The Network settings are displayed. To enter the Network settings into your product, follow these steps: 1. On the Internet Protocol Setup screen, pressthe ENTER button. 2. Press the ^Ў buttons to select Manual, and then press the ENTER button. 3. Press the Ў button to go to the first entry field (IP Address). Network Setting Internet Protocol Setup : Manual . IP Address : 0 0 0 0 Subnet Mask : 255 255 255 0 Gateway : 0 0 DNS : Manual 0 0 DNS Server : 0 0 >Move "Enter 0 0 'Return 36 English 03 Setup 4. Use the number buttons on your remote to enter numbers. 5. When done with each field, use the > button to move successively to the next fi eld. You can also use the other arrow buttons to move up, down, and back. 6. Enter the IP Address, Subnet Mask, and Gateway values. 7. Press the Ў button to go to DNS. 8. Press the Ў button to go to the first DNS entry field. 9. Press the RETURN button on your remote. 10. Run a Network Test to ensure the product has connected to your network (See page 39). Wireless Network You can setup the wireless network three ways: • Using PBC(WPS) • Using the Auto Network Search function. • Manually. Each method is described below. Setting Up the Wireless Network Connection - PBC(WPS) The easiest way to set up the wireless network connection is using the PBC(WPS) function. If your wireless router has a PBC(WPS) button, follow these steps: 1. In the Network Settings menu, press the ^Ў buttons to select Network Setting, and then press the ENTER button. The Internet Protocol Setup screen appears. 2. Press the RED(A) button on the remote control. 3. Press the PBC(WPS) button on your router within two minutes. Your product displays the Network Selection Screen, and automatically acquires all the network setting va...