Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
You can check the device information including the storage size, delete the BD data or change the Flash memory device. Change Device allows you to select either the product’s Internal Memory or External Memory (connected USB Device). If the data to be stored from BD-LIVE is greater than the size of the remaining memory or the Internal Memory is full, connect an External USB device, then select External Device in the menu. Description of Device(Storage) Information on the Product Total Size : Total size of the Device(Storage). Available Size : Available size of the Device (Storage). NOTE In the external memory mode, disc playback will be stopped if you disconnect the USB device in the middle of the playback. Only those USB devices formatted in FAT file system (DOS 8.3 volume label) are supported, and it is recommended to use USB devices that support USB 2.0 protocol, 4 MB/sec or faster read/write speed. A USB HDD device cannot be used for BD Data storage (BD-LIVE). The Resume Play function may not work after formatting the storage device. The total size of BD Data Management may differ, depending on the software version. • • . . . . . Display Audio System Network Language Security General Support Settings Delete all BD data in the storage. BD Data Management Current Device : Internal Memory Total Size : 703MB Available Size : 703MB Delete BD Data \ Change Device : Internal Memory " Select ' Return English 37 05 Setup Clock Set time-related functions. Clock Mode : You can set it to Auto or Manual. If you select Manual, the Clock Set menu will be activated while DST will be deactivated. Clock Set : You can specify the current time and date manually. Time Zone : You can specify the time zone that is applicable to your area. DST : You can set DST (Daylight Saving Time) on or off. DivX(R) Registration View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content. NOTE This option is not activated if you select OK. To activate this option, please activate the DivX(R) Deactivation. • • • • . DivX(R) Deactivation Select this to get a new registration code. NOTE This function can be operated when DivX(R) Registration function is deactivated. Network Setup To begin setting up the network connection for your product, follow these steps: In the Home menu, press the <> buttons to select the Settings, and then press the ENTER button. Press the ^Ў buttons to select Network, and then press the ENTER button. Press the ^Ў buttons to select Network Settings, and then press the ENTER button. Press the ^Ў buttons to select Network Type, and then press the ENTER button. Press the ^Ў buttons to select Wired or Wireless, and then press the ENTER button. Go to the next section. Network Settings Please contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, we recommend using the Auto setting. This is the easiest and will work in the majority of cases. If it is static, you must use the manual set up procedure. Directions for wired networks are below. Directions for wireless networks are after the directions for wired networks. . 1. 2. 3. 4. 5. 6. Display Audio System Network Language Security General Support Settings Choose your preferred method of setting clock. Clock Clock Mode : Auto \ Clock Set Time Zone : GMT + 0:00 DST : Off > Move " Enter ' Return Display Audio System Network Language Security General Support Settings Initial Setting Disc Menu : Audio : Subtitle : DivX(R) Video On Demand Your registration code is : XXXXXXXXXX To learn more visit OK Display Audio System Network Language Security General Support Settings Initial Setting Disc Menu : Audio : Do you waSnut btot idtleeactivate your d:evice? Yes No 38 English Setup Wired Network In the Network Settings menu, press the ^Ў buttons to select Network Settings, and then press the ENTER button. The Internet Protocol Setup screen appears. Press the > button, then select Auto or Manual, and then press the ENTER button. Setting Up a Wired Connection - Auto If you selected Auto, the Network Function acquires and fills in the values for IP Address, Subnet Mask, etc., automatically. NOTE This process can take up to five minutes. After the Network Function has acquired the network values, press the RETURN button. Then, run a Network Test to ensure the product has connected to your network (See page 41). If the Network Function does not acquire the network values or you selected Manual, go to the directions for Manual Setup. 1. 2. 1. . 2. 3. Setting Up a Wired Connection - Manual If the Auto Setting does not work, you’ll need to set the Network Setting values manually. To get the Network setting values from most Windows computers, follow these steps: Right click the Network icon on the bottom right of the screen. In the pop-up menu, click Status. On the dialog that appears, click the Support tab. On the Support tab, click the Details button. The Network settings are displayed. To enter the Network settings into you...