Войти:
Оценок - 2, средний балл: 4 ( )

Инструкция по эксплуатации Sony, модель BDP-S490

Производитель: Sony
Размер: 2.46 mb
Название файла: 4410140321.pdf
Язык инструкции:en
Фото и характеристики  Sony  BDP-S490
Перейти к скачиванию



Фрагмент инструкции


*2Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. *3Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS- HD and the Symbol together are registered trademarks & DTS-HD Master Audio is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. Step 3: Preparing for Network Connection If you are not going to connect the player to a network, proceed to “Step 4: Easy Setup” (page 16). Wired Setup Use a LAN cable to connect to the LAN (100) terminal on the player. ADSL modem/ Cable modemBroadband routerLAN cable (not supplied) Internet z Using a shielded interface cable (LAN cable), straight or crossing, is recommended. USB Wireless Setup (BDP-S490 only) Turn off the player, then connect the USB Wireless LAN Adapter (UWA- BR100 as of December 2011) to the USB jack on the rear of the player. b •The USB Wireless LAN Adapter may not be available in some regions/countries. •The receiving sensitivity changes depending on the environment. Use the extension cable supplied with the USB Wireless LAN Adapter if necessary. Wireless LAN routerADSL modem/ Cable modemInternetUSB Wireless LAN AdapterLAN cable (not supplied) Wireless Setup (BDP-S590 only) Use the wireless LAN that is built into the player. Wireless LAN routerADSL modem/ Cable modemInternetLAN cable (not supplied) Step 4: Easy Setup When turned on for the first time Wait for a short while before the player turns on and starts [Easy Initial Settings]. 1Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the battery compartment. 2Plug the player into the mains. to mains 3Press [/1 to turn on the player. 4Turn on the TV and set the input selector on your TV. This will show the signal from the player on your TV screen. 5Perform [Easy Initial Settings]. Follow the on-screen instructions to make the basic settings using Эта инструкция также подходит к моделям:
Blu-Ray проигрыватели - BDP-S590 (2.46 mb)


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории