Оценок - 4, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Black Level Control Select lighter or darker for adjusting the black level control to the desired setting for picture enhancement. Audio Dynamic Range Compression You can listen at low volumes but still hear dialog clearly. (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only) .“Auto” is effective only when playing Dolby TrueHD. Digital Audio Output Press [OK] to show the following settings: Dolby D/Dolby D +/Dolby TrueHDDTS/DTS-HD Select the audio signal to output. .Select “PCM”, when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment. .Not making the proper settings may result in noise. BD-Video Secondary Audio Select whether to mix or not mix the primary audio and secondary audio (including the button click sound). (• 19) .If “Off” is selected, the unit outputs the primary audio only. PCM Down Conversion Select how to output audio with a sampling frequency of 96 kHz for the PCM output from the DIGITAL AUDIO OUT. .If “On” is selected, the signals that are converted to 48 kHz are output. .If “Off” is selected, and the connected equipment does not support 96 kHz, the sound will not be output normally. .Signals are converted to 48 kHz despite the settings in the following cases: – when the signals have a sampling frequency of 192 kHz – when the disc has copy protection – when “BD-Video Secondary Audio” is set to “On” 30 VQT3B58 Downmix Select the downmix system of multi-channel to 2-channel sound. .Select “Surround encoded”, when the connected equipment supports the virtual surround function. .There is no effect on “Bitstream” via HDMI AV OUT and DIGITAL AUDIO OUT. .The audio will be output in “Stereo” in the following cases: – AVCHD playback – Playback of secondary audio (including the button click sound). 7.1ch Audio Reformatting [BDT310] [BDT215] [BDT210] Surround sound with 6.1ch or less is automatically expanded and played back at 7.1ch. .If “Off” is selected, sound is played over the original number of channels. (Note that in the case of 6.1ch audio, playback will be at 5.1ch.) .Audio reformatting is enabled in the following cases: – When you have selected “PCM” in “Digital Audio Output”. – When the audio is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or LPCM. – BD-Video playback High Clarity Sound [BDT310] [BDT215] [BDT210] When connected to TV via the HDMI terminal for outputting image, it produces clearer sound. .Set to “Enable” and then set “High Clarity Sound” on the Playback menu to “On”. (• 28) Audio Delay Synchronization between picture and sound is corrected by adjusting the delay time of the audio output. Display Display Status Messages Choose whether to show status messages automatically. On-screen Language Choose the language for menus and on-screen messages. Screen Saver Function This is to prevent burn-in on the screen. .When this is set to “On”: If there is no operation for 10 minutes or more, Direct Navigator screen switches to HOME menu automatically. .While playing and pausing, etc., this function is not available. .As for Music [CD-DA] or MP3, regardless of the setting, if there is no operation for a while, Direct Navigator screen switches to the other states automatically. Front Panel Display Changes the brightness of the unit’s display. .If “Auto” is selected the display is dimmed during playback and bright not during playback. HDMI(SUB) V.OFF LED Control [BDT310] Set to light the HDMI (SUB) V.OFF LED or not. .This will light when “HDMI(SUB) Output Mode” is set to “V.OFF”, and the power of the connected equipment to the HDMI AV OUT SUB is on. License Information about the software used by this unit is displayed. TV / Device Connection 3D Settings Press [OK] to show the following settings: 3D Type Select the format of the connected TV. .Change the settings for 3D on the TV also when “Checker board” or “Side by side” is selected. 3D Playback Precautions Set to display or hide the 3D viewing warning screen whenplaying back the 3D compatible video software. TV Aspect Set to match the type of television connected. When connected to a 4:3 aspect television and playing 16:9 ratio image: When connected to a 16:9 widescreen television and playing 4:3 ratio image: 4:3 Pan & Scan The sides are cut off so the picture fills the screen. When playing BD-Video, video is output as “4:3 Letterbox”. 4:3 Letterbox Black bands appear at the top and bottom of the picture. 16:9 Video is displayed as a 4:3 ratio image in the center of the screen. 16:9 Full Video is displayed as a horizontally stretched 16:9 image. HDMI Connection Press [OK] to show the following settings: HDMI(SUB) Output Mode [BDT310] Set to output the video from the HDMI AV OUT SUB terminal or not. HDMI Resolution The items supported by the connected devices are indicated on the screen as “.”. When any item without “.” is selected, the images may be distorted. .If “Auto” is selected, automatically selects the output resolution best suited...
Эта инструкция также подходит к моделям:Blu-Ray проигрыватели - DMP-BDT215 (1.58 mb)