Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
If you have read assistance, you may access our online help at or call 1-800-605-8610 while with your product (and Model / Serial number) © 2008 Funai Electric Co., Ltd. NB500MS9 Blu-ray Disc Player Playback Function Setup OthersIntroduction Connections 1. Connections Follow to the back side of this sheet. NB500MS9 Blu-ray Disc Player This unit is compatible to play back the following discs / files. Playable discs Logos Blu-ray Disc - BD-video (single / double layer) - BD-RE ver.2.1 (single / double layer) (Recorded in BDMV format) - BD-R (single / double layer) (Recorded in BDMV format) (Unclosed discs may not be played back.) DVD-video DVD+RW (single layer) DVD+R (single / double layer) DVD-RW (finalized video mode discs only) DVD-R (finalized video mode discs only) CD-DA (audio CD) CD-RW CD-R Kodak Picture CD DTS-CD Playable files Media JPEG DVD, CD-RW/-R, SD Memory Card (including SDHC), miniSD Card, microSD Card Readable cards Playable files / data SD Memory Card (8MB - 2GB) JPEG, picture-in-picture commentary, subtitles or other extras for BD-ROM Profile 1 ver.1.1 SDHC Memory Card (4GB) miniSD Card (8MB - 2GB) microSD Card (8MB - 2GB) For miniSD Card and microSD Card, the adapter is necessary. miniSD Card adapter miniSD Card microSD Card adapter microSD Card • This unit has been designed to play back BD-video with region A and DVD-video with region “1” or “ALL“. You cannot play back BD-video or DVD-video that are labeled for other regions. Look for the symbols on the right on your BD-video or DVD-video. If these region symbols do not appear on your BD-video or DVD-video, you cannot play back the disc in this unit. The letter or number inside the globe refers to region of the world. A BD-video or DVD-video labeled for a specific region can only play back on the unit with the same region code. DVD-video BD-video AUDIO/VIDEO CONNECTION Press [HDMI] to change the resolution of the video signal being output from HDMI OUT jack. The video resolution changes as follows every time [HDMI] is pressed. 480p 720p 1080i 1080p 1080p24 Note : • You cannot select the video resolutions which are not supported by the connected TV. • In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High Speed HDMI Cable is recommended) and select “1080p24” if the connected TV is compatible with 1080p24 frame input. Supplied cables used in this connection are as follows: RCA audio cable (L/R) x 1 RCA video cable x 1 HDMI cable (High Speed HDMI Cable) x 1 Please purchase the rest of the necessary cables at your local store. • • • E5H21UD Printed in China 1VMN25954 / ..... “Blu-ray Disc“ and are trademarks. is a trademark of DVD Format/Logo Licensing Corporation. Make one of the following connections, depending on the capabilities of your existing device. AUDIO IN R L VIDEO OUT VIDEO IN DVI IN TV this unit and RCA audio cable RCA video cable RCA component video cable Method 2 COMPONENT VIDEO OUT Method 1 AUDIO OUT VIDEO OUT Method 3 HDMI OUT HDMI-DVI cable AUDIO CONNECTION VIDEO CONNECTION or or COMPONENT VIDEO OUT PB/CB Y PR/CR COMPONENT VIDEO IN Y PB/CB PR/CR (Red) (Blue) (Green) (Red) (Blue) (Green) OR Playable Discs and Files Region Codes HDMI Connection Basic Connections All devices should be turned off and disconnected from the power outlet, when you make the connections. HDMI IN HDMI cable Method 4 this unit TV BEST PICTURE BETTER PICTURE STANDARD PICTURE STANDARD AUDIO Quick Start Guide BEST AUDIO / PICTURE EN EN 2-Channel Analog Audio Connection Digital Audio Connection COAXIAL DIGITAL AUDIO INPUT AV receiver/amplifi er DIGITAL OUT (COAXIAL) digital audio coaxial input jack digital audio coaxial cable audio this unit After you made all necessary connections, connect the AC cord to the AC IN. Then connect the AC cord to the AC outlet. Insert the plugs securely. Incomplete connections will result in the generation of noise. this unit AC outlet AC cord AC 120V, 60 Hz 2Turn on the TV and select the appropriate input on the TV to which the unit is connected. 5Press [OPEN / CLOSE A ] to close the disc tray. It may take a while to load the disc. Some discs may start playback automatically. 1Press [ y STANDBY-ON] 3Press [OPEN / CLOSE A ] to open the disc tray. 4Place the disc on the disc tray with its label side facing up. Align the disc to the disc tray guide. 6Press [PLAY B] to start playback. For many of BD-video and DVD-video, a menu screen may appear. In this case, use [K / L / s / B] to select the desired item, then press [OK]. To pause playback: Press [PAUSE F ]. To return to normal playback: Press [PLAY B ]. To stop playback: Press [STOP C ]. To eject the disc: Press [OPEN / CLOSE A ] to open the disc tray, then remove the disc before turning off the unit. HDMI CLEAR A-B MODE SUBTITLE AUDIO DISPLAY SEARCH STANDBY-ON OPEN/ CLOSE OK 1. Connections (cont'd) 2. Playback Connection to an Audio System Connecting the AC Cord stereo system AUDIO OUT L R AUDIO...