Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
1. Press the GOTO button. 2. Press to select Time, press the button to highlight time, enter the corresponding number buttons (0-9) for the setting point you want, then press the OK button to confirm. 3. Playback starts from the selected section. Note: • Some discs may not respond to this process. • Some scenes may not be located as precisely as you specified. • This method for accessing specific locations is available only within the current title of the disc. Playing Picture Files This unit can play picture files stored on Blu-ray Disc (BD), USB flash drives, CD-R/CD-RW, DVD+R/-R or DVD+RW/-RW discs. Playing Picture Files from a disc or USB drive. 1. Load the disc containing JPG files or insert the USB drive containing JPG files. 2. A selection menu will appear on the screen. 3. While viewing a JPG, you can press ENTER button to access viewing options such as ROTATE, SLIDESHOW SPEED, and TRANSITION EFFECTS. Note: • For playing files on USB flash drive, you should plug in the USB flash drive when the unit is in OFF mode. • You can press the PAUSE button to interrupt playback, and press the PLAY button to resume playback. Repeat Playback You can play a specific title or chapter repeatedly. (Chapter repeat, title repeat, A-B repeat) Repeating a chapter (Blu-ray Disc or DVD) You can play the same chapter repeatedly. 1. While the disc is playing, press the REPEAT DISC button until the indicator displays on the screen. The current chapter is played repeatedly. Repeating a title You can play the same title repeatedly. 2. While the disc is playing, press the REPEAT DISC button until the indicator displays on the screen. The current title is played repeatedly. To resume normal playback 3. While the disc is playing, press the REPEAT DISC button until the indicator displays on the screen. Repeating a single track (CD) You can play a single track or an entire disc repeatedly. You can play the same track repeatedly. 1. While the disc is playing, press the REPEAT DISC button until the indicator displays on the screen. The current track is played repeatedly. Repeating an entire disc 2. While the disc is playing, press the REPEAT DISC button until the indicator displays on the screen. The entire disc is played repeatedly. To resume normal playback 3. Press the REPEAT DISC button until the indicator displays on the screen. Repeating a specific section (Blu-ray Disc/DVD/CD) You can play a specific section repeatedly. 1. While the disc is playing, press the REPEAT A-B button at the beginning of the section ( is displayed) you want to play repeatedly. 2. Press the REPEAT A-B button again at the end of the section ( is displayed) you want to play repeatedly. 3. The unit will immediately begin replaying your selection. To resume normal playback 4. While the disc is playing, press the REPEAT A-B button until the indicator displays on the screen. Note: • A-B repeat can only be used within the same title. If the start and end of the section to be repeated are in different titles, A-B repeat is cancelled. • The A-B repeat function does not operate in scenes where different camera angles are recorded. Customizing the Function Settings Language Setup 1. In STOP mode, press the SETUP button. Language is highlighted. 2. Use the button to move the highlight bar to the right, press the or button to select Player Menu, Subtitles, Disc Menu and Audio, press the OK button to select. 3. Use the or button to select your preferred language, then press the OK button to confirm. 4. Press the button to go back to the previous menu. Repeat steps 2 and 3 to adjust other options. 5. To exit the SETUP MENU and return to the normal screen, press the EXIT or SETUP button. Note: • Some discs may not play in the audio language selected. A prior language may be programmed on the disc. • Some discs may be set to display subtitles in a language other than the one selected. A prior subtitle language may be programmed on the disc. • Some discs allow you to change subtitle selections via the disc menu only. If this is the case, press the MENU button and choose the appropriate subtitle from the selection on the disc menu. • Some discs may not included your pre-selected language. In this case, the DVD player automatically displays disc menus consistent with the disc’s initial language setting. Video Setup 1. In STOP mode, press the SETUP button. Press the button to select Video. 2. Use the button to move the highlight bar to the right, press the or button to select TV Shape, View Mode and HDMI Resolution, press the OK button to select. 3. Use the or button to select your settings, then press the OK button to confirm. 4. Press the button to go back to the previous menu. Repeat steps 2 and 3 to adjust other options. 5. To exit the SETUP MENU and return to the normal screen, press the EXIT or SETUP button. TV Shape Depending on the format of the Blu-ray Disc or DVD, you can choose the picture format (aspect ratio) best suited to the format of your TV screen: 4:3 •...