Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
-Press OK to confirm. 13.5.3 Time Settings This screen is used to set the local time offset with respect to actual local time retrieved from the network. The offset setting is updated automatically. 1 Select the appropriate Time Offset with respect to GMT time. 2 Press OK to confirm and exit the screen, or EXIT to exit without storing the changes. EN To lock or unlock a particular channel: 1 Scroll to the channel you want to lock or unlock. 2 Press the yellow colour key to lock it.A mark appears, indicating that the channel is locked. 3 Alternatively, press the yellow colour key to unlock a locked channel. 4 Repeat this operation as needed. 5 Press EXIT to exit the screen. 13.3 Settings Settings is used to set: • Display options • Language options 13.3.1 Display options This screen is used to set display options according to your preferences. -Select values for the following: • Banner Duration: select a banner display duration, from 2 to 8 seconds using the u or i key. • Banner Transparency: select On to enable banner transparency. • Channel Number Input Latency: select the time lapse after which a number key press is taken into account, from 1 to 5 using the u or i key. • Timer Warning Duration: select a banner display duration, from 15 seconds to 5 minutes using the u or i key. • Front panel intensity in Standby: Low or High • Zoom factor applies on menu: from 1.0 (no zoom) to 1.2 (+20 % zoom) -Press OK to confirm. 13.3.2 Language options This screen is used to set language options according to your preferences. -Select values for the following: • On-Screen Language: select a language for on-screen display • Audio Language: select your audio language • Subtitles: select On, “If audio not available”, “Hard of hearing” for special subtitles for deaf or Hard of Hearing viewers, or Off to disable subtitles. • Subtitles Language: select subtitles language. -Press OK to confirm. 13.4 For Parents This screen is used to enable Parental Lock and change your receiver password. The password is a 4-digit code used to lock channels and features of the receiver.This code is different from the PIN code, which is a 4-digit code used to prevent access to programmes not intended for persons under 18. To enable Parental Lock: -Select Yes to enable Parental Lock. -Alternatively, select No to disable Parental Lock. Additionally, you may modify your receiver password from this screen. To modify your receiver password: 1 Press the red colour key to access the Password Change feature. 2 Enter your current password. If you have never changed your password, enter 1234 (factory setting). 3 Enter your new password using number keys. Note that your password cannot be made up of identical digits. 1911 must not be used as a password! 4 Enter your new password again to confirm. 5 Press EXIT. EN 13.5.4 Factory Settings This screen is used to reset your receiver back to the factory default condition. - When prompted, press the red colour key to confirm. - Alternatively, press EXIT to exit the screen without modifying the receiver settings. If you reset your receiver to factory settings, you lose all the settings you stored previously. 13.5.5 Decoder Status The Decoder Status sub menu menu includes the following items: o System Information o Decoder Upgrade 13.5.5.1 System Information This screen is used to display information about your receiver, including the Premiere Serial Number and software version. You can also access this screen via the Premiere menu. 13.5.5.2 Software Upgrade This item is used for software upgrades. Select it to check the current software version as well as launch a search for new software.After a while,the Software Upgrade screen indicates whether new software is available. -Press EXIT to exit the screen in case no new software is available. In case software is available, you are offered three options: - Press the green colour key to choose to upgrade your receiver immediately, and then press OK to launch new software installation. - Or press the yellow colour key to choose to upgrade your receiver later, and then press OK to confirm your choice. New software installation takes place as soon as you set your receiver to standby. - Or press the red colour key to refuse to upgrade your receiver and return to the Decoder status sub menu. After successful software installation, a confirmation message is displayed. In case of installation failure, a failure message is displayed, indicating that a new installation attempt will take place as soon as you set your receiver to standby. In both cases, press OK to exit the upgrade process. You can also launch a search for new software from the screen described above using the red colour key. Software upgrade messages Software update starting Software loading progress: from 0 to 100% Software storing progress: from 0 to 100% Do not unplug the receiver before the end of the storing operation. 13.6 Channel Search This item is used to search for new channels. It is recommended no...
Эта инструкция также подходит к моделям:Ресиверы и усилители - DCR9000/02 (3.08 mb)