Оценок - 3, средний балл: 4 ( )

Производитель: Philips Размер: 4.61 mb Название файла: bdp5010_f7_dfu_aen.pdf Язык инструкции:

HOME A“Settings” A“Advanced Setup” A“Others” A “Network Connection” A “Enable (Easy)” Connection Test Network settings are set to the following settings initially. (In most cases, you can connect to the Internet without making any changes to the default settings.) - IP Address Setting Auto(DHCP) HOME A “Settings” A “Advanced Setup” A “Others” A “Network Connection” A “Connection Test” After you made IP address/DNS settings or when a LAN cable is connected, always perform the connection test to check if the connection is correctly made. 1) Use [K/ L] to highlight “Settings” in the home menu, then press [OK]. 2) Use [K/ L] to highlight “Advanced Setup”, then press [OK]. 3) Use [K/ L] to highlight “Others”, then press [OK]. 4) Use [K/ L] to highlight “Network Connection”, then press [OK]. 5) Use [K/ L] to highlight “Connection Test”, then press [OK]. Connection test will start automatically and the test result will appear right after the connection test finishes. • “Testing...” : The test is in progress. • “Pass” : Connection test is successfully completed. • “Fail” : Connection test failed. Check the connection settings. Press [OK] to go to the list of network status confirmation screen. 6) Press [OK] to go back to the previous screen, or press [HOME ] to go back to the home menu. ***.***.***.*** ***.***.***.*** ***.***.***.*** ***.***.***.*** ***.***.***.*** IP Address Subnet Mask Default Gateway Primary DNS Secondary DNS then press 'OK'. Note • If the connection test passes, you can enjoy the BD- Live functions using the Internet without making any extra settings. • If the connection test fails, you may need to change the MAC address settings of your router. You can check the MAC address of this unit on “Network Status” screen. (refer to page 45). - DNS Setting Auto(DHCP) -Proxy Setting Do Not Use - Connection Speed Auto - BD-Live Setting Allow If you want to set the network settings back to the default settings as above (except “BD-Live Setting”), follow the procedure below. 1) Follow steps 1) to 4) in “Connection Test” on this page. 2) Use [K/ L] to highlight “Enable(Easy)”, then press [OK]. • The unit will start the connection test automatically and the test result will appear right after the test finishes. • After the connection test finishes, press [OK] to go to network status confirmation screen. 3) Press [OK] to activate the network settings and set the network connection automatically. [HOME ] to go back to the home menu. Note • The setting of “BD-Live Setting” will not be set back to the default, even if you follow the procedure. Enable(Custom) “Advanced “Network “Enable HOME A“Settings” AA“Others” AA Setup” Connection” (Custom)” In following cases, select “Enable(Custom)” to set each setting as necessary. -When connection test failed with the setting of “Enable(Easy)”. -When instructed by your Internet service provider to make specific settings in accordance with your network environment. • IP Address Setting / DNS Setting 1) Follow steps 1) to 4) in “Connection Test” on this page. 2) Use [K/ L] to highlight “Enable(Custom)”, then press [OK]. 3) Use [K/ L] to highlight “IP Address Setting”, then press [OK]. 4) Use [K/ L] to highlight the desired setting, then press [OK]. Introduction Connections Basic Setup Playback Function Setup Others “Auto(DHCP)” : If your router has DHCP server function, select “Auto(DHCP)”. “Manual” : If your router does not have DHCP server function, select “Manual”. 43EN SETUPS If you select “Manual”, follow the following instruction to set the IP address and DNS. 4-a) IP address setting screen will appear. Enter IP address, subnet mask and default gateway with cursor buttons and number buttons. IP Address Setting IP Address Subnet Mask Default Gateway Clear OK • Enter the IP address number after checking the specifications of your router. • If the IP address number is unknown, check the IP address number of other devices. (e.g. PC connected via LAN cable) and assign a different number from those of other devices. After you enter all correctly, press [OK] to go to the DNS setting screen. 4-b) DNS setting screen will appear. Enter primary DNS and secondary DNS with cursor buttons and number buttons. DNS Setting Primary DNS Secondary DNS Clear OK • Enter the numbers instructed by your Internet provider. • If the number is unknown, check the number of other devices (e.g. PC connected via LAN cable) and assign the same number. 4-c) After you enter all correctly, press [OK]. • Confirmation message will appear. Select “Yes” to complete the settings. IP Address ***.***.***.*** Subnet Mask ***.***.***.*** Default Gateway ***.***.***.*** Primary DNS ***.***.***.*** Secondary DNS ***.***.***.*** Is Setting OK? Yes No 5) Press [BACK U] to go back to the previous screen, or press [HOME ] to go back to the home menu. Note • The range of input number is between 0 and 255. • If you enter a number larger than 255, the number will automatically be 255. • The manually entered number will be...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: