Оценок - , средний балл: ( )

Инструкция по эксплуатации Philips, модель BDP7320/F7

Производитель: Philips
Размер: 6.36 mb
Название файла: bdp7320_f7_dfu_aen.pdf

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

• The unit will start the connection test automatically and the test result will appear right after the test finishes. • If the connection test passes, press [OK] to display the confirmation screen of the network selection. •Press [OK] again to display the confirmation screen of the network settings. 5) Press [OK] to activate the network settings and set the network connection automatically. Press [ (home)] to go back to the home menu. Note • The setting of “BD-Live Setting” will not be set back to the default, even if you follow the procedure. 58 EN SETUPS Manual (Wired) In following cases, select “Manual”(wired) to set each setting as necessary. -When connection test failed with the setting of “Standard”(wired). -When instructed by your Internet service provider to make specific settings in accordance with your network environment. To set the network setting to “Manual”(wired), follow the following procedure. 1) Follow steps 1) to 3) in “Standard (Wired)” on page 58. 2) Use [K/ L] to select “Manual”, then press [OK]. -Setting menu of “Manual”(wired) will be displayed. Set each setting as necessary. IP Address Setting / DNS Setting 1) Use [K/ L] to select “IP Address Setting”, then press [OK]. 2) Use [K/ L] to select the desired setting, then press [OK]. “Auto(DHCP)” : If your router has DHCP server function, select “Auto(DHCP)”. “Manual” : If your router does not have DHCP server function, select “Manual”. If you select “Manual”, follow the following instruction to set the IP address and DNS. 2-a) IP address setting screen will appear. Enter IP address, subnet mask and default gateway with cursor buttons and number buttons. IP Address Setting IP Address Subnet Mask Default Gateway Clear OK • Enter the IP address number after checking the specifications of your router. • If the IP address is unknown, check the IP address of other devices. (e.g. PC connected via LAN cable) and assign a different number from those of other devices. After you enter all correctly, press [OK] to go to the DNS setting screen. EN 2-b) DNS setting screen will appear. Enter primary DNS and secondary DNS with cursor buttons and number buttons. DNS Setting Primary DNS Secondary DNS Clear OK • Enter the DNS addresses provided by your Internet provider. • If the DNS address is unknown, check the DNS address of other devices (e.g. PC connected via LAN cable) and assign the same DNS address. 2-c) After you enter all correctly, press [OK]. • Confirmation message will appear. Select “Yes” to complete the settings. IP Address xxx.xxx.xxx.xxx Subnet Mask xxx.xxx.xxx.xxx Default Gateway xxx.xxx.xxx.xxx Primary DNS xxx.xxx.xxx.xxx Secondary DNS xxx.xxx.xxx.xxx Is Setting OK? Yes No 3) Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu. Note • The range of input numbers is between 0 and 255. • If you enter a number larger than 255, the number will automatically be 255. • The manually entered addresses will be saved even if you change the setting to “Auto(DHCP)”. • When you enter a wrong number, press [RED] to cancel. (the number will be back to “0”.) • If you want to enter 1 or 2 digit number in one cell, press [B] to move on to the next cell. • If the entered IP address or the default gateway or primary DNS address is same as the default setting, IP address setting will be set to “Auto(DHCP)”. (The manually entered number will be saved). • When IP address setting is set to “Manual”, the setting of DNS setting will automatically be “Manual” and when IP address setting is set to “Auto(DHCP)”, you can set either “Auto(DHCP)” or “Manual” for DNS setting. Introduction Connections Basic Setup Playback Function Setup Others EN 59 SETUPS Proxy Setting 1) Use [K/ L] to select “Proxy Setting”, then press [OK]. 2) Use [K/ L] to select the desired setting, then press [OK]. • For default settings, select “Do Not Use”. • If you need to change the proxy setting as instructed by your Internet service provider to set the designated proxy address and port, select “Use”. If you select “Use”, follow the following instructions to set the proxy address and proxy port. 2-a) Proxy address setting screen will appear. Enter proxy address. • The keyboard screen will appear. 1 a k u 2 b l v 3 c m w 4 d n x 5 e o y 6 f p z 7 g q . 8 h r - 9 i s _ 0 j t OK xxxxxxxx_ Proxy Setting Proxy Address Clear All Clear OKa/A/@ [K/ L / s / B] : Move the highlight. [the Number buttons] : Enter number. [OK] : Enter the highlighted number / word. *[RED] : Clear the entered number or word. [GREEN] : Clear all the entered numbers or words. [BLUE] : Switch between abc, ABC and @!? *[YELLOW] : Set the entered number or word. * These buttons can be used in other network settings. After you enter all correctly, press [YELLOW] to go to the proxy port setting screen. 2-b) Enter proxy port number with number buttons. Proxy Setting Proxy Port x Clear OK 2-c) After you enter all correctly, Press [YELLOW]. • Confirmation message will appear. Select “Ye...