Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
The battery is not covered by the guarantee. Safety • The blade is very sharp, handle with care, do not touch the blade or hold the leg at the blade end when fitting to the body. • The hand blender is designed for intermittent use. Do not use non-stop for more than 1 minute at a time. Allow to cool down for a minimum of 5 minutes before further use. • Never use your hand blender in a bowl or saucepan whilst it is cooking. • Never short out the contacts on the motor body or blender unit. 48965 Rev 1 13/4/04 3:47 PM Page 2 Important safety instructions The use of any electrical appliance requires the following of basic common sense safety rules. Primarily there is danger of injury or death and secondly the danger of damage to the appliance. These are indicated in the text by the following two conventions: WARNING: Danger to the person! IMPORTANT: Damage to the appliance! In addition we offer the following essential safety advice. Location • Do not use outdoors. Charger lead • The charger lead should reach without straining the connections. • Do not let the charger lead hang over the edge of a worktop where a child could reach it. • Do not let the charger lead run across an open space e.g. between a low socket and table. • Do not let the charger lead run across a cooker or toaster or other hot areas which might damage the cable. Personal safety •Unplug from outlet when not in use and before cleaning or removing parts. •WARNING: Do not touch moving parts. Keep hands, hair, clothing as well as utensils away from the hand blender blades. •WARNING: Take care when handling metal blades as they are very sharp. Do not touch the blade or hold the leg at this end when fitting to the body. •WARNING: To remove the blender leg, hold blender in a position so you cannot press the operating button, grip shaft of blender leg, press the release button and pull apart. •WARNING: Always remove the blender leg before cleaning, this will reduce accidental operation of the blender. • Don’t clean the blender leg under running water while still attached to the main housing. • Do not use during cooking processes or with boiling liquids. •WARNING: To protect against fire, electric shock and personal injury do not immerse charger, base or blender in water or other liquid. Children • Do not allow children to use this blender. Children are vulnerable in the kitchen particularly when unsupervised and if appliances are being used or cooking is being carried out. •Teach children to be aware of dangers in the kitchen, warn them of the dangers of reaching up to areas where they cannot see properly or should not be reaching. Other safety considerations • Do not operate any appliance with a damaged charger lead or after the appliance malfunctions or has been damaged in any manner. Contact our helpline for advice on examination and repair. • Do not use accessories not recommended by the manufacturer as there is the danger of fire, electric shock or personal injury. • Do not place on or near a hot gas or electric burner or in an heated oven. • Do not allow metal objects to touch the charging contacts on the motor body or blender base unit. Damage to the batteries and charger will result. Electrical requirements Check that the voltage on the rating plate of your charger corresponds with your house electricity supply which must be A.C. (Alternating Current). Use only the charger unit supplied. 2 48965 Rev 1 13/4/04 3:47 PM Page 3 Battery disposal To remove the battery see battery replacement page 6. This product contains a sealed Nickel cadmium battery. When it reaches the end of its useful life it must not be disposed of in the normal household waste. The battery must be removed and disposed of at an authorised recycling plant. Your local Ni-Cd Ni-Cd authority will have a centre which accepts such waste for recycling. Illustration ¤ › fi ‰ fl . ‡ · „ ‹ ‚ A Features . Blender base unit ‡ Blender leg release button ¤ Motor body · Charging adaptor ‹ On/off control switch ‚ Measuring beaker › Blender leg „ Wall mounting holes fi Charging socket ‰ Screws and wall plugs x 2 fl Blender leg location slot A Blade cover Your hand blender is designed to help you prepare everything from soups to chocolate mousse quickly and with minimal effort. 3 48965 Rev 1 13/4/04 3:47 PM Page 4 Unpacking your cordless hand blender WARNING: Carefully unpack your hand blender as blades are very sharp. Wash all parts before first use, see cleaning instructions page 10. Assembly 1 Fit the blender body and blender leg onto the base unit as shown. A 2 Attach the charging adaptor plug into the socket on the base unit. B 3 Plug the adaptor into a suitable 13A socket outlet and switch on. A A Charging 1 Attach the blender to the base unit as described in assembly. The red light will illuminate to show that the body is correctly located in the base and that it is accepting a charge. • If the red light is not illuminated, lift up the blender body and relocate i...