Оценок - 5, средний балл: 3.6
(
)
)
|
Фрагмент инструкции
The ‘Power’ button can also be pressed. 10 11 OPERATING YOUR BREVILLE DIE-CAST HEMISPHERE BLENDER™ OPERATING YOUR BREVILLE DIE-CAST HEMISPHERE BLENDER™ OPERATING YOUR BREVILLE DIE-CAST HEMISPHERE BLENDER™ OPERATING YOUR BREVILLE DIE-CAST HEMISPHERE BLENDER™ 7.At the end of use, always ensure the Breville Die Cast Hemisphere Blender is turned off by pressing the ‘Power’ button on the control panel. Then unplug the cord. Ensure the motor and blades have completely stopped before attempting to move the appliance, or when the Breville Die-Cast Hemisphere Blender™ is not in use and before disassembling, cleaning and storing. NOTE: During the blending process, ingredients may stick to the sides of the blender jug. To push the food back onto the blades, press the ‘Power’ button on the control panel and remove the power cord. Remove the lid and use a plastic spatula to scrape down the sides of the jug. Replace the lid before recommencing blending. NOTE: If the blades become stuck, the blender will automatically turn off. To reset, turn the blender off at the power outlet, clean the jug and blades with a spatula and then turn back on. The blender will be reset. If any moisture or liquid appears on top of the motor base during blending, press the ‘Power’ button on the control panel, and remove the power plug. Remove the blender jug. Wipe the motor base immediately with a dry cloth or paper towelling to absorb the liquid. Check the blender jug is correctly assembled. NOTE: The Die-Cast Hemisphere Blender™ features a motor overload protection feature. If the motor is being overloaded, the motor will stop and the key LED's will illuminate and flash. To restart the blender again, unplug from the mains let it cool down for 30 minutes or longer. Dissassembling the blender 1.Always ensure the Breville Die-Cast Hemisphere Blender™ is switched off by pressing the ‘Power’ button on the control panel. Then unplug the power cord. 2.Remove the blender jug from the motor base by grasping the handle and lifting the jug in an upward direction. Remove the blade assembly by upturning the blender jug and twisting the Blade Removal System clockwise, then lift upwards and away from the base of the blender. 3.Remove the silicon seal from the blade assembly. 12 13 14 CLEANING your Breville Die-Cast Hemiphere Blender™ 14 CLEANING your Breville Die-Cast Hemiphere Blender™ CLEANING YOUR BREVILLE DIE-CAST HEMISPHERE BLENDER™ Cleaning the motor base 1.Wipe the motor base with a soft, damp cloth then dry thoroughly. 2.Wipe any excess food particles from the power cord. NOTE: Do not use abrasive scouring pads or cleaners when cleaning the parts or motor base as they may scratch the surface. Cleaning the blender jug, lid, inner lid and blade assembly 1.Wash all parts in warm soapy water with a soft cloth. Use a kitchen bottle brush to dislodge stubborn foods. Rinse and dry thoroughly. NOTE: The blender jug, lid and inner lid can be washed in the dishwasher on a standard wash setting. Ensure the blade assembly has been removed from the blender jug before placing the blender into the dishwasher. NOTE: It is recommended that you periodically fill the jug 1/3 full with warm soapy water and run a blending cycle to help clean and dislodge any buildup in the blade assembly. Removing stubborn or strong food stains and odors Strong smelling foods such as garlic, fish and some vegetables such as carrots may leave an odor or stain on the blender jug and lid. To remove, soak blender jug and lid for 5 minutes in warm soapy water. Then wash with a mild detergent and warm water, rinse well and dry thoroughly. Storage Store your Breville Die-Cast Hemisphere Blender™ upright with the blender jug, lid and inner lid assembled and inserted on the motor base or beside it. Do not place anything on top. NOTE: The blending blades are extremely sharp. Avoid any contact with fingers and hands. Use caution when handling and storing. NOTE: The blender jug is made from BPA Free Copolyester materials. 15 DO'S AND DON'TSBLENDING CHART DO'S AND DON'TSBLENDING CHART Food Preparation & Usage Quantity Function Time Lean meat/ poultry Trim excess fat and sinew, cut into . in cubes. Use: Mince 9 oz Blend or Auto Pulse 10-20 secs Fish/seafood Remove skin and bones and cut into . in cubes. Use: Mince 10. oz Blend or Auto Pulse 10-15 secs Raw veg. Peel and cut into . in cubes. Use: Stuffing, fillings, puree, soup 7 oz Blend or Auto Pulse 10-30 secs Nuts Remove shells. Use: Cakes, toppings, pastes 7 oz Auto Pulse 10-30 secs Bread or biscuit crumbs Cut bread into . in pieces, break up biscuits. Use: Cheesecake crust 3. oz Auto Pulse 10-30 secs Mayonnaise Mix the egg yolk and vinegar. Add the oil. Use: Dressings 4. oz Blend 10-15 secs then 30-60 secs Whipped cream Add sugar or vanilla if desired Use: Topping 10 fl oz Blend/Auto Pulse 10 secs 1-2 times Herbs/spices Whole or halved Use: Pastes, sauces 1 cup Blend or Auto Pulse 20-30 secs Smoothie Milk, whole fresh fruits, yoghurt, ice cream ...